Lensmeter
1 - The eyepiece 2 – Reticle
3 – Objective lens 4 - Keplerian telescope
5 - Lens Stop 6 – Unknown lens
7 - Collimator objective 8 - Reticle 9 – Light source 10 – Collimator 11 – Mechanism
12 - Power Drum (+20 and -20 Diopters)
A lensmeter or lensometer, also known as a focimeter[1], is an ophthalmic instrument. It is mainly used by optometrists and opticians to verify the correct prescription in a pair of eyeglasses, to properly orient and mark uncut lenses, and to confirm the correct mounting of lenses in spectacle frames. Lensmeters can also verify the power of contact lenses, if a special lens support is used.
The parameters appraised by a lensmeter are the values specified by an ophthalmologist or optometrist on the patient's prescription: sphere, cylinder, axis, add, and in some cases, prism. The lensmeter is also used to check the accuracy of progressive lenses, and is often capable of marking the lens center and various other measurements critical to proper performance of the lens. It may also be used prior to an eye examination to obtain the last prescription the patient was given, in order to expedite the subsequent examination.
History
In 1876, Hermann Snellen introduced a phakometer which was a similar set up to an optical bench which could measure the power and find the optical centre of a convex lens. Troppman went a step further in 1912, introducing the first direct measuring instrument.
In 1922, a patent was filed for the first projection lensmeter, which has a similar system to the standard lensmeter pictured above, but projects the measuring target onto a screen eliminating the need for correction of the observer's refractive error in the instrument itself and reducing the requirement to peer down a small telescope into the instrument. Despite these advantages the above design is still predominant in the optical world.[2]
See also
- Vertometer
- Lens clock
- Optical power
- Diopter
- Prism dioptre
- Corrective lens components
- Abbe refractometer