Vinyl emulation
This article needs additional citations for verification. (June 2006) |
Vinyl emulation software allows the user to physically manipulate the playback of digital audio files on a computer using the turntables as an interface, thus preserving the hands-on 'feel' of deejaying with vinyl while allowing playback of audio recordings not available in phonograph form. This allows DJs to scratch, beatmatch, and perform other turntablism that would be impossible with a conventional keyboard-and-mouse computer interface.
Overview
Vinyl emulation normally uses special vinyl records which are played on conventional turntables. The turntables' audio output - the timecode recording - is routed into an analog-to-digital converter, or ADC. This ADC may be a multi-channel ASIO soundcard or a dedicated external USB or firewire audio interface box (usually distributed with the software). The ADC sends digital time code information to the software, which then translates the signal into corresponding changes in the playback speed and position of a digital audio file. The manipulated audio output of the program is then sent back through the ADC or the computer's sound card, and into an audio mixer where it can be mixed like any other analog audio signal.
The result is digital audio playback that feels like it can be manipulated like a vinyl record. However, there is always a short delay between the needle's reading of the time code and the software's playback of the audio. This delay is usually between 8 and 30 milliseconds. The delay is treated as a figure of merit for vinyl emulation products. A shorter delay allows the DJ to have better response and control of the music.
In some countries, including the United Kingdom and Finland, a digital DJ license is required to legally play copyrighted music with vinyl emulation software.
Software packages
Final Scratch was the first vinyl emulation software sold publicly. Since its release in 2001, many similar software and hardware packages have been developed and marketed.
The following applications are licensed under the terms of the GNU General Public License:
Proprietary software applications include:
- Final Scratch
- Traktor ScratchPro
- Serato Scratch Live
- Deckadance
- VirtualDJ
- Numark CUE
- MixVibes DVS
- MS Pinky
- Torq
- Touch DVS
See also
External links
- Technical Information and Tips on Torq's Vinyl Control System by Chad Carrier, a technical abstract on Torq Control Vinyl time-code.