Iron

"Fe" redirects here. For other uses, see Fe (disambiguation).

This article is about the chemical element. For other uses, see Iron (disambiguation).

Iron, ₂₆Fe

Iron
Pronunciation	/ˈaɪərn/
Allotropes	see Allotropes of iron
Appearance	lustrous metallic with a grayish tinge
Standard atomic weight Ar°(Fe)
	55.845±0.002 55.845±0.002 (abridged)
Iron in the periodic table
Hydrogen Helium Lithium Beryllium Boron Carbon Nitrogen Oxygen Fluorine Neon Sodium Magnesium Aluminium Silicon Phosphorus Sulfur Chlorine Argon Potassium Calcium Scandium Titanium Vanadium Chromium Manganese Iron Cobalt Nickel Copper Zinc Gallium Germanium Arsenic Selenium Bromine Krypton Rubidium Strontium Yttrium Zirconium Niobium Molybdenum Technetium Ruthenium Rhodium Palladium Silver Cadmium Indium Tin Antimony Tellurium Iodine Xenon Caesium Barium Lanthanum Cerium Praseodymium Neodymium Promethium Samarium Europium Gadolinium Terbium Dysprosium Holmium Erbium Thulium Ytterbium Lutetium Hafnium Tantalum Tungsten Rhenium Osmium Iridium Platinum Gold Mercury (element) Thallium Lead Bismuth Polonium Astatine Radon Francium Radium Actinium Thorium Protactinium Uranium Neptunium Plutonium Americium Curium Berkelium Californium Einsteinium Fermium Mendelevium Nobelium Lawrencium Rutherfordium Dubnium Seaborgium Bohrium Hassium Meitnerium Darmstadtium Roentgenium Copernicium Nihonium Flerovium Moscovium Livermorium Tennessine Oganesson – ↑ Fe ↓ Ru manganese ← iron → cobalt
Atomic number (Z)	26
Group	group 8
Period	period 4
Block	d-block
Electron configuration	[Ar] 3d6 4s2
Electrons per shell	2, 8, 14, 2
Physical properties
Phase at STP	solid
Melting point	1811 K ​(1538 °C, ​2800 °F)
Boiling point	3134 K ​(2861 °C, ​5182 °F)
Density (at 20° C)	7.874 g/cm3
when liquid (at m.p.)	6.98 g/cm3
Heat of fusion	13.81 kJ/mol
Heat of vaporization	340 kJ/mol
Molar heat capacity	25.10 J/(mol·K)
Vapor pressure P (Pa) 1 10 100 1 k 10 k 100 k at T (K) 1728 1890 2091 2346 2679 3132
Atomic properties
Oxidation states	common: +2, +3 −4,? −2, −1, 0, +1, +4, +5, +6, +7
Electronegativity	Pauling scale: 1.83
Ionization energies	1st: 762.5 kJ/mol 2nd: 1561.9 kJ/mol 3rd: 2957 kJ/mol (more)
Atomic radius	empirical: 126 pm
Covalent radius	Low spin: 132±3 pm High spin: 152±6 pm
Van der Waals radius	194 [1] pm
Spectral lines of iron
Other properties
Natural occurrence	primordial
Crystal structure	α-Fe: ​body-centered cubic (bcc) (cI2)
Lattice constant	a = 286.65 pm (at 20 °C)
Crystal structure	γ-Fe (912–1394 °C): ​face-centered cubic (fcc) (cF4)
Lattice constant	a = 364.68 pm (at 916 °C)
Thermal expansion	12.07×10−6/K (at 20 °C)
Thermal conductivity	80.4 W/(m⋅K)
Electrical resistivity	96.1 nΩ⋅m (at 20 °C)
Curie point	1043 K
Magnetic ordering	ferromagnetic
Young's modulus	211 GPa
Shear modulus	82 GPa
Bulk modulus	170 GPa
Speed of sound thin rod	5120 m/s (at r.t.) (electrolytic)
Poisson ratio	0.29
Mohs hardness	4
Vickers hardness	608 MPa
Brinell hardness	200–1180 MPa
CAS Number	7439-89-6
History
Discovery	before 5000 BC
Symbol	"Fe": from Latin ferrum
Isotopes of iron
Main isotopes Decay abun­dance half-life (t1/2) mode pro­duct 54Fe 5.85% stable 55Fe synth 2.73 y ε 55Mn 56Fe 91.8% stable 57Fe 2.12% stable 58Fe 0.28% stable 59Fe synth 44.6 d β− 59Co 60Fe trace 2.6×106 y β− 60Co

1. 1. 1. ^^^IRON :-( :-) :-D (^^^) (US: /aɪ.ərn/, with two syllables, and UK: /ˈaɪərn/, with one) is a chemical element with the symbol Fe (Template:Lang-la) and atomic number 26. It is a metal in the first transition series. Like other group 8 elements, it exists in a wide range of oxidation states. Iron and iron alloys (steels) are by far the most common metals and the most common ferromagnetic materials in everyday use. Fresh iron surfaces appear lustrous silvery-gray, but oxidize in air.

Iron is the most common element in the earth as a whole, and the most well known and most i dont no esshays common in the Earth's crust. It is produced as a result of stellar fusion in high-mass stars, and it is the heaviest stable element produced by stellar fusion because the fusion of iron is the last nuclear fusion reaction that is exothermic. Iron is the most widely used metal, and iron compounds, which include ferrous and ferric compounds, have several uses as well.

Iron has been used since ancient times, though not as early as bronze or the other copper related alloys. Iron is ubiquitous in modern life; it is used primarily for its structural strength. Pure iron is soft (softer than aluminium), but the material is significantly strengthened by addition of minute amounts of impurities, such as carbon. Alloying iron with appropriate small amounts (up to a few per cent) of other metals and carbon produces steel, which can be 1,000 times harder than pure iron. Iron is smelted in a blast furnace, where ore is reduced by coke to metallic iron.

Elemental iron is reactive; it oxidizes in air to give iron oxides, also known as rust. The rusting of iron and iron alloys is undesirable, and has a major economic impact. Unlike many other metals which form passivating oxide layers, iron oxides occupy more volume than iron itself. Thus, iron oxides flake off and expose fresh surfaces for corrosion. Iron oxide mixed with aluminium powder can be ignited to create a thermite reaction, used in welding and purifying ores.

Iron exists from oxidation state −2 to + 6, although +2 and +3 are the most common. It forms binary compounds with the halogens and the chalcogens. Among its organometallic compounds, ferrocene was the first sandwich compound discovered. Iron plays an important role in biology, forming complexes with dioxygen as hemoglobin and myoglobin; these two compounds are common oxygen transport proteins in vertebrates.

Characteristics

Mechanical properties

Characteristic values of tensile strength (TS) and Brinell hardness (BH) of different forms of iron.

Material	TS (MPa)	BH (Brinell)
Iron whiskers	11000
Ausformed (hardened) steel	2930	850–1200
Martensitic steel	2070	600
Bainitic steel	1380	400
Pearlitic steel	1200	350
Cold-worked iron	690	200
Small-grain iron	340	100
Iron containing dissolved carbon	140	40
Single crystal of pure iron	10	3

Mechanical properties of iron and its alloys are evaluated using a variety of tests, such as the Brinell test, Rockwell test, or tensile strength tests, among others; the results on iron are so consistent that iron is often used to calibrate measurements or to relate the results of one test to another. Those measurements reveal that mechanical properties of iron crucially depend on purity: Purest research-purpose single crystals of iron are softer than aluminium. Addition of only 10 parts per million of carbon doubles their strength. The hardness increases rapidly with carbon content up to 0.2% and saturates at ~0.6%. The purest industrially produced iron (about 99.99% purity) has a hardness of 20–30 Brinell.

Allotropes

Main article: Allotropes of iron

Iron represents perhaps the best-known example of allotropy in a metal. There are three allotropic forms of iron, known as α, γ and δ.

As molten iron cools down it crystallizes at 1538 °C into its δ allotrope, which has a body-centered cubic (bcc) crystal structure. As it cools further its crystal structure changes to face-centered cubic (fcc) at 1394 °C, when it is known as γ-iron, or austenite. At 912 °C the crystal structure again becomes bcc as α-iron, or ferrite, is formed, and at 770 °C (the Curie point, T_c) iron becomes magnetic. As the iron passes through the Curie temperature there is no change in crystalline structure, but there is a change in "domain structure", where each domain contains iron atoms with a particular electronic spin. In unmagnetized iron, all the electronic spins of the atoms within one domain are in the same direction; the neighboring domains point in various directions and thus cancel out. In magnetized iron, the electronic spins of all the domains are aligned, so that the magnetic effects of neighboring domains reinforce each other. Although each domain contains billions of atoms, they are very small, about 10 microns across.

Iron is of greatest importance when mixed with certain other metals and with carbon to form steels. There are many types of steels, all with different properties, and an understanding of the properties of the allotropes of iron is key to the manufacture of good quality steels.

Alpha iron, also known as ferrite, is the most stable form of iron at normal temperatures. It is a fairly soft metal that can dissolve only a small concentration of carbon (no more than 0.021% by mass at 910 °C).

Above 912 °C and up to 1400 °C α-iron undergoes a phase transition from bcc to the fcc configuration of γ-iron, also called austenite. This is similarly soft and metallic but can dissolve considerably more carbon (as much as 2.04% by mass at 1146 °C). This form of iron is used in the type of stainless steel used for making cutlery, and hospital and food-service equipment.

Isotopes

Main article: Isotopes of iron

Naturally occurring iron consists of four stable isotopes: 5.845% of ⁵⁴Fe, 91.754% of ⁵⁶Fe, 2.119% of ⁵⁷Fe and 0.282% of ⁵⁸Fe. The nuclide ⁵⁴Fe is predicted to undergo double beta decay, but this process had never been observed experimentally for these nuclei, and only the lower limit on the half-life was established: T_1/2>3.1×10²² years. ⁶⁰Fe is an extinct radionuclide of long half-life (2.6 million years).

Much of the past work on measuring the isotopic composition of Fe has focused on determining ⁶⁰Fe variations due to processes accompanying nucleosynthesis (i.e., meteorite studies) and ore formation. In the last decade however, advances in mass spectrometry technology have allowed the detection and quantification of minute, naturally occurring variations in the ratios of the stable isotopes of iron. Much of this work has been driven by the Earth and planetary science communities, although applications to biological and industrial systems are beginning to emerge.

The most abundant iron isotope ⁵⁶Fe is of particular interest to nuclear scientists as it represents the most stable nuclide possible. It is impossible to perform fission or fusion on ⁵⁶Fe and still liberate energy. Since ⁵⁶Ni is easily produced from lighter nuclei in the alpha process in nuclear reactions in supernovae (see silicon burning process), nickel-56 (14 alpha particles) is the endpoint of fusion chains inside extremely massive stars, since addition of another alpha particle would result in zinc-60, which requires a great deal more energy. This nickel-56, which has a half-life of about 6 days, is therefore made in quantity in these stars, but soon decays by two successive positron emissions within supernova decay products in the supernova remnant gas cloud, to first radioactive cobalt-56, and then stable iron-56. This last nuclide is therefore common in the universe, relative to other stable metals of approximately the same atomic weight.

In phases of the meteorites Semarkona and Chervony Kut a correlation between the concentration of ⁶⁰Ni, the daughter product of ⁶⁰Fe, and the abundance of the stable iron isotopes could be found which is evidence for the existence of ⁶⁰Fe at the time of formation of the solar system. Possibly the energy released by the decay of ⁶⁰Fe contributed, together with the energy released by decay of the radionuclide ²⁶Al, to the remelting and differentiation of asteroids after their formation 4.6 billion years ago. The abundance of ⁶⁰Ni present in extraterrestrial material may also provide further insight into the origin of the solar system and its early history. Of the stable isotopes, only ⁵⁷Fe has a nuclear spin (−1/2).

Nuclei of iron atoms have some of the highest binding energies per nucleon, surpassed only by the nickel isotope ⁶²Ni. This is formed by nuclear fusion in stars. Although a further tiny energy gain could be extracted by synthesizing ⁶²Ni, conditions in stars are unsuitable for this process to be favored. Elemental distribution on Earth greatly favors iron over nickel, and also presumably in supernova element production.

Iron-56 is the heaviest stable isotope produced by the alpha process in stellar nucleosynthesis; elements heavier than iron and nickel require a supernova for their formation. Iron is the most abundant element in the core of red giants, and is the most abundant metal in iron meteorites and in the dense metal cores of planets such as Earth.

Creation

Iron is created in extremely large, extremely hot (over 2.5 billion kelvin) stars, in a process called the silicon burning process. It is the last element to be produced in this manner. The process starts with the second largest stable nucleus created by silicon burning: calcium. One stable nucleus of calcium fuses with one helium nucleus, creating unstable titanium. Before the titanium decays, it can fuse with another helium nucleus, creating unstable chromium. Before the chromium decays, it can fuse with another helium nucleus, creating unstable iron. Before the iron decays, it can fuse with another helium nucleus, creating unstable nickel. The nickel then decays to unstable cobalt, which finally decays to stable iron-56. The iron can no longer be fused with other elements. As the star's core fills with iron, it begins to cool until there is no longer enough energy to maintain its size. It then collapses and the result is a supernova. Supernovas also create additional forms of stable iron via the r-process.

Compounds and reactions

Hydrated iron(III) chloride, also known as ferric chloride

See also: Category:Iron compounds

Iron forms compounds mainly in the +2 and +3 oxidation states. Traditionally, iron(II) compounds are called ferrous, and iron(III) compounds ferric. Iron also occurs in higher oxidation states, an example being the purple potassium ferrate (K₂FeO₄) which contains iron in its +6 oxidation state. Iron(IV) is a common intermediate in many in biochemical oxidation reactions. Numerous organometallic compounds contain formal oxidation states of +1, 0, −1, or even −2. The oxidation states and other bonding properties are often assessed using the technique of Mössbauer spectroscopy. There are also many mixed valence compounds that contain both iron(II) and iron(III) centers, such as magnetite and Prussian blue (Fe₄(Fe[CN]₆)₃). The latter is used as the traditional "blue" in blueprints.

Iron's oxidation states

Oxidation state	Representative compound
−2	Disodium tetracarbonylferrate (Collman's reagent)
−1
0	Iron pentacarbonyl
1	Cyclopentadienyliron dicarbonyl dimer ("Fp2")
2	Ferrous sulfate, ferrocene
3	Ferric chloride, ferrocenium tetrafluoroborate
4	Barium ferrate(IV)
5
6	Potassium ferrate

The iron compounds produced on the largest scale in industry are iron(II) sulfate (FeSO₄·7H₂O) and iron(III) chloride (FeCl₃). The former is one of the most readily available sources of iron(II), but is less stable to aerial oxidation than Mohr's salt ((NH₄)₂Fe(SO₄)₂·6H₂O). Iron(II) compounds tend to be oxidized to iron(III) compounds in the air.

Unlike many other metals, iron does not form amalgams with mercury. As a result, mercury is traded in standardized 76 pound flasks (34 kg) made of iron.

Oxides and sulfides

Iron reacts with oxygen in the air to form various oxide and hydroxide compounds; the most common are iron(II,III) oxide (Fe₃O₄), and iron(III) oxide (Fe₂O₃). Iron(II) oxide also exists, though it is unstable at room temperature. These oxides are the principal ores for the production of iron (see bloomery and blast furnace). They are also used in the production of ferrites, useful magnetic storage media in computers, and pigments. The best known sulfide is iron pyrite (FeS₂), also known as fool's gold owing to its golden luster.

Halides

The binary ferrous and ferric halides are well known, with the exception of ferric iodide. The ferrous halides typically arise from treating iron metal with the corresponding binary halogen acid to give the corresponding hydrated salts.

Fe + 2 HX → FeX₂ + H₂

Iron reacts with fluorine, chlorine, and bromine to give the corresponding ferric halides, ferric chloride being the most common:

2 Fe + 3 X₂ → 2 FeX₃ (X = F, Cl, Br)

Cyanides

Prussian blue

Several cyanide complexes are known. The most famous example is Prussian blue, (Fe₄(Fe[CN]₆)₃). Potassium ferricyanide and potassium ferrocyanide are also known; the formation of Prussian blue upon reaction with iron(II) and iron(III) respectively forms the basis of a "wet" chemical test. Prussian blue is also used as an antidote for thallium and radioactive caesium poisoning. Prussian blue can be used in laundry bluing to correct the yellowish tint left by ferrous salts in water.

Organometallic compounds

See also: organoiron chemistry

Ferrocene

Several carbonyl compounds of iron are known. The premier iron(0) compound is iron pentacarbonyl, Fe(CO)₅, which is used to produce carbonyl iron powder, a highly reactive form of metallic iron. Thermolysis of iron pentacarbonyl gives the trinuclear cluster, triiron dodecacarbonyl. Collman's reagent, disodium tetracarbonylferrate, is a useful reagent for organic chemistry; it contains iron in the −2 oxidation state. Cyclopentadienyliron dicarbonyl dimer contains iron in the rare +1 oxidation state.

Ferrocene is an extremely stable complex. The first sandwich compound, it contains an iron(II) center with two cyclopentadienyl ligands bonded through all ten carbon atoms. This arrangement was a shocking novelty when it was first discovered, but the discovery of ferrocene has led to a new branch of organometallic chemistry. Ferrocene itself can be used as the backbone of a ligand, e.g. dppf. Ferrocene can itself be oxidized to the ferrocenium cation (Fc⁺); the ferrocene/ferrocenium couple is often used as a reference in electrochemistry.

Occurrence

See also: Category:Iron minerals

Biological occurrence

Iron is abundant in biology. Iron-proteins are found in all living organisms, ranging from the evolutionarily primitive archaea to humans. The color of blood is due to the hemoglobin, an iron-containing protein. As illustrated by hemoglobin, iron often is bound to cofactors, e.g. in hemes. The iron-sulfur clusters are pervasive and include nitrogenase, the enzymes responsible for biological nitrogen fixation.(see #Biological role). Influential theories of evolution have invoked a role for iron sulfides, iron-sulfur world theory.

Planetary occurrence

File:Widmanstatten-patterns-3.jpg

Iron meteorites of similar composition of Earth's inner and outer core

Iron is the sixth most abundant element in the Universe, formed as the final step of nucleosynthesis, by silicon fusing in massive stars. Metallic iron is rarely found on the surface of the earth because it tends to oxidize, but its oxides are pervasive and represent the primary ores. While it makes up about 5% of the Earth's crust, both the Earth's inner and outer core are believed to consist largely of an iron-nickel alloy constituting 35% of the mass of the Earth as a whole. Iron is consequently the most abundant element on Earth, but only the fourth most abundant element in the Earth's crust. Most of the iron in the crust is found combined with oxygen as iron oxide minerals such as hematite and magnetite. Large deposits of iron are found in banded iron formations. These geological formations are a type of rock consisting of repeated thin layers of iron oxides, either magnetite (Fe₃O₄) or hematite (Fe₂O₃), alternating with bands of iron-poor shale and chert. The banded iron formations are common in the time between 3,700 million years ago and 1,800 million years ago

About 1 in 20 meteorites consist of the unique iron-nickel minerals taenite (35–80% iron) and kamacite (90–95% iron). Although rare, iron meteorites are the main form of natural metallic iron on the Earth's surface.

It was proven by Mössbauer spectroscopy that the red color of the surface of Mars is derived from an iron oxide-rich regolith.

History

Main article: History of ferrous metallurgy

Wrought iron

The symbol for Mars has been used since antiquity to represent iron.

The Delhi iron pillar is an example of the iron extraction and processing methodologies of India. The iron pillar at Delhi has withstood corrosion for the last 1600 years.

Iron objects of great age are much rarer than objects made of gold or silver due to the ease of corrosion of iron. Beads made of meteoric iron in 3500 B.C. or earlier were found in Gerzah, Egypt by G. A. Wainwright. The beads contain 7.5% nickel, which is a signature of meteoric origin since iron found in the earth's crust has very little to no nickel content. Meteoric iron was highly regarded due to its origin in the heavens and was often used to forge weapons and tools or whole specimens placed in churches. Items that were likely made of iron by Egyptians date from 2500 to 3000 BC. Iron had a distinct advantage over bronze in warfare implements. It was much harder and more durable than bronze, although susceptible to rust.

The first iron production started in the Middle Bronze Age but it took several centuries before iron displaced bronze. Samples of smelted iron from Asmar, Mesopotamia and Tall Chagar Bazaar in northern Syria were made sometime between 2700 and 3000 BC. The Hittites appear to be the first to understand the production of iron from its ores and regard it highly in their society. They began to smelt iron between 1500 and 1200 BC and the practice spread to the rest of the Near East after their empire fell in 1180 BC. The subsequent period is called the Iron Age. Iron smelting, and thus the iron age, reached Europe two hundred years later and arrived in Zimbabwe, Africa by the 8th century.

Artifacts from smelted iron occur in India from 1800–1200 BC, and in the Levant from about 1500 BC (suggesting smelting in Anatolia or the Caucasus).

The Book of Genesis, fourth chapter, verse 22 contains the first mention of iron in the Old Testament of the Bible; "Tubal-cain, an instructor of every artificer in brass and iron." Other verses allude to iron mining (Job 28:2), iron used as a stylus (Job 19:24), furnace (Deuteronomy 4:20), chariots (Joshua 17:16), nails (I Chron. 22:3), saws and axes (II Sam. 12:31), and cooking utensils (Ezekiel 4:3). The metal is also mentioned in the New Testament, for example in Acts chapter 12 verse 10, "[Peter passed through] the iron gate that leadeth unto the city" of Antioch.

According to Pliny the Elder, iron use was common in the Roman era. He reported in his "Natural History" chapter 39 that iron was used to help "construct houses, cleave rocks, and perform so many other useful offices of life" and that iron was used in "wars, murders, and robberies."

Cast iron

Cast iron was first produced in China about 550 BC, but was hardly in Europe until the medieval period. During the medieval period, means were found in Europe of producing wrought iron from cast iron (in this context known as pig iron) using finery forges. For all these processes, charcoal was required as fuel.

Medieval blast furnaces were about 10 feet tall and made of fireproof brick; forced air was usually provided by hand-operated bellows. Modern blast furnaces have grown much bigger.

Toward the end of the 18^th century, cast iron began to replace wrought iron for certain purposes, because it was cheaper. Carbon content in iron wasn't implicated as the reason for the differences in properties of wrought iron, cast iron and steel until the 18^th century.

Steel

See also: Steelmaking

Steel (with smaller carbon content than pig iron but more than wrought iron) was first produced in antiquity by using a bloomery. Blacksmiths in Luristan in western Iran were making good steel by 1000 BC. Then improved versions, Wootz steel by India and Damascus steel by China were developed around 300 B.C. and 500 A.D. respectively. These methods were specialized, and so steel did not become a major commodity until the 1850s.

New methods of producing it by carburizing bars of iron in the cementation process were devised in the 17th century AD. In the Industrial Revolution, new methods of producing bar iron without charcoal were devised and these were later applied to produce steel. In the late 1850s, Henry Bessemer invented a new steelmaking process, involving blowing air through molten pig iron, to produce mild steel. This made steel much more economical, thereby leading to wrought iron no longer being produced.

Industrial production

See also: Iron ore

The production of iron or steel is a process containing two main stages, unless the desired product is cast iron. The first stage is to produce pig iron in a blast furnace. Alternatively, it may be directly reduced. The second is to make wrought iron or steel from pig iron by a further process.

The fining process of smelting iron ore to make wrought iron from pig iron, with the right illustration displaying men working a blast furnace, from the Tiangong Kaiwu encyclopedia, published in 1637 by Song Yingxing.

How iron was extracted in the 19th century

For a few limited purposes like electromagnet cores, pure iron is produced by electrolysis of a ferrous sulfate solution

Blast furnace

Main article: Blast furnace

Ninety percent of all mining of metallic ores is for the extraction of iron. Industrially, iron production involves iron ores, principally hematite (nominally Fe₂O₃) and magnetite (Fe₃O₄) in a carbothermic reaction (reduction with carbon) in a blast furnace at temperatures of about 2000 °C. In a blast furnace, iron ore, carbon in the form of coke, and a flux such as limestone (which is used to remove silicon dioxide impurities in the ore which would otherwise clog the furnace with solid material) are fed into the top of the furnace, while a massive blast of heated air, about 4 tons, per ton of iron, is forced into the furnace at the bottom.

Iron output in 2005

In the furnace, the coke reacts with oxygen in the air blast to produce carbon monoxide:

2 C + O₂ → 2 CO

The carbon monoxide reduces the iron ore (in the chemical equation below, hematite) to molten iron, becoming carbon dioxide in the process:

Fe₂O₃ + 3 CO → 2 Fe + 3 CO₂

Some iron in the high-temperature lower region of the furnace reacts directly with the coke:

2 Fe₂O₃ + 3 C → 2 Fe + 3 CO₂

The flux is present to melt impurities in the ore, principally silicon dioxide sand and other silicates. Common fluxes include limestone (principally calcium carbonate) and dolomite (calcium-magnesium carbonate). Other fluxes may be used depending on the impurities that need to be removed from the ore. In the heat of the furnace the limestone flux decomposes to calcium oxide (also known as quicklime):

CaCO₃ → CaO + CO₂

Then calcium oxide combines with silicon dioxide to form a liquid slag.

CaO + SiO₂ → CaSiO₃

The slag melts in the heat of the furnace. In the bottom of the furnace, the molten slag floats on top of the denser molten iron, and apertures in the side of the furnace are opened to run off the iron and the slag separately. The iron, once cooled, is called pig iron, while the slag can be used as a material in road construction or to improve mineral-poor soils for agriculture

This heap of iron ore pellets will be used in steel production.

In 2005, approximately 1,544 million metric tons of iron ore were produced worldwide. According to the British Geological Survey, China was the top producer of iron ore with at least one quarter world share, followed by Brazil, Australia and India.

Direct iron reduction

Since coke is becoming more regulated due to environmental concerns, alternative methods of processing iron have been developed. One of them is known as direct iron reduction. It reduces iron ore to a powder substance called sponge iron, which is suitable for steelmaking. There are two main reactions that go on in the direct reduction process:

Natural gas is partially oxidized (with heat and a catalyst):

2 CH₄ + O₂ → 2 CO + 4 H₂

These gases are then treated with iron ore in a furnace, producing solid sponge iron:

Fe₂O₃ + CO + 2 H₂ → 2 Fe + CO₂ + 2 H₂O

Silica is removed by adding a flux, i.e. limestone, later.

Further processes

Main articles: Steelmaking and Ironworks

Pig iron is not pure iron, but has 4–5% carbon dissolved in it with small amounts of other impurities like sulfur, magnesium, phosphorus and manganese. As the carbon is the major impurity, the iron (pig iron) becomes brittle and hard. This form of iron, also known as cast iron, is used to cast articles in foundries such as stoves, pipes, radiators, lamp-posts and rails.

Alternatively pig iron may be made into steel (with up to about 2% carbon) or wrought iron (commercially pure iron). Various processes have been used for this, including finery forges, puddling furnaces, Bessemer converters, open hearth furnaces, basic oxygen furnaces, and electric arc furnaces. In all cases, the objective is to oxidize some or all of the carbon, together with other impurities. On the other hand, other metals may be added to make alloy steels.

The hardness of the steel depends upon its carbon content: the higher the percentage of carbon, the greater the hardness and the lesser the malleability. The properties of the steel can also be changed by several methods.

Annealing involves the heating of a piece of steel to 700–800°C for several hours and then gradual cooling. It makes the steel softer and more workable.

Steel may be hardened by cold working. The metal is bent or hammered into its final shape at a relatively cool temperature. Cold forging is the stamping of a piece of steel into shape by a heavy press. Wrenches are commonly made by cold forging. Cold rolling, which involves making a thinner but harder sheet, and cold drawing, which makes a thinner but stronger wire, are two other methods of cold working. To harden the steel, it is heated to red hot and then cooled by quenching it in the water. It becomes harder and more brittle. If it is too hardened, it is then heated to a required temperature and allowed to cool. The steel thus formed is less brittle.

Heat treatment is another way to harden steel. The steel is heated red hot, then cooled quickly. The iron carbide molecules are decomposed by the heat, but do not have time to reform. Since the free carbon atoms are stuck, it makes the steel much harder and stronger than before.

Sometimes both toughness and hardness are desired. A process called case hardening may be used. Steel is heated to about 900 °C in a bed of charcoal and/or nitrogen. They diffuse into the steel, making the surface very hard. The surface cools quickly, but the inside cools slowly, making an extremely hard surface and a durable, resistant inner layer.

Iron may be passivated by dipping it into a concentrated nitric acid solution. This forms a protective layer of oxide on the metal, protecting it from further corrosion. When the metal is jarred, however, the layer is broken, allowing the metal to corrode again.

Metallurgical applications

Photon mass attenuation coefficient for iron.

Iron is the most widely used of all the metals, accounting for 95% of worldwide metal production. Its low cost and high strength make it indispensable in engineering applications such as the construction of machinery and machine tools, automobiles, the hulls of large ships, and structural components for buildings. Since pure iron is quite soft, it is most commonly used in the form of steel.

Commercially available iron is classified based on purity and the abundance of additives. Pig iron has 3.5–4.5% carbon and contains varying amounts of contaminants such as sulfur, silicon and phosphorus. Pig iron is not a saleable product, but rather an intermediate step in the production of cast iron and steel from iron ore. Cast iron contains 2–4% carbon, 1–6% silicon, and small amounts of manganese. Contaminants present in pig iron that negatively affect material properties, such as sulfur and phosphorus, have been reduced to an acceptable level. It has a melting point in the range of 1420–1470 K, which is lower than either of its two main components, and makes it the first product to be melted when carbon and iron are heated together. Its mechanical properties vary greatly, dependent upon the form carbon takes in the alloy.

"White" cast irons contain their carbon in the form of cementite, or iron carbide. This hard, brittle compound dominates the mechanical properties of white cast irons, rendering them hard, but unresistant to shock. The broken surface of a white cast iron is full of fine facets of the broken carbide, a very pale, silvery, shiny material, hence the appellation.

In gray iron the carbon exists free as fine flakes of graphite, and also renders the material brittle due to the stress-raising nature of the sharp edged flakes of graphite. A newer variant of gray iron, referred to as ductile iron is specially treated with trace amounts of magnesium to alter the shape of graphite to spheroids, or nodules, vastly increasing the toughness and strength of the material.

Wrought iron contains less than 0.25% carbon. It is a tough, malleable product, but not as fusible as pig iron. If honed to an edge, it loses it quickly. Wrought iron is characterized by the presence of fine fibers of slag entrapped in the metal. Wrought iron is more corrosion resistant than steel. It has been almost completely replaced by mild steel for traditional "wrought iron" products and blacksmithing.

Mild steel corrodes more readily that wrought iron, but is cheaper and more widely available. Carbon steel contains 2.0% carbon or less, with small amounts of manganese, sulfur, phosphorus, and silicon. Alloy steels contain varying amounts of carbon as well as other metals, such as chromium, vanadium, molybdenum, nickel, tungsten, etc. Their alloy content raises their cost, and so they are usually only employed for specialist uses. One common alloy steel, though, is stainless steel. Recent developments in ferrous metallurgy have produced a growing range of microalloyed steels, also termed 'HSLA' or high-strength, low alloy steels, containing tiny additions to produce high strengths and often spectacular toughness at minimal cost.

Apart from traditional applications, iron is also used for protection from ionizing radiation. Although it is lighter than another traditional protection material, lead, it is much stronger mechanically. The attenuation of radiation as a function of energy is shown in the graph.

The main disadvantage of iron and steel is that pure iron, and most of its alloys, suffer badly from rust if not protected in some way. Painting, galvanization, passivation, plastic coating and bluing are all used to protect iron from rust by excluding water and oxygen or by sacrificial protection.

Applications of iron compounds

Although its metallurgical role is dominant in terms of amounts, iron compounds are pervasive in industry as well being used in many niche uses. Iron catalysts are traditionally used in the Haber-Bosch Process for the production of ammonia and the Fischer-Tropsch process for conversion of carbon monoxide to hydrocarbons for fuels and lubricants. Powdered iron in an acidic solvent was used in the Bechamp reduction the reduction of nitrobenzene to aniline.

Iron(III) chloride finds use in water purification and sewage treatment, in the dyeing of cloth, as a coloring agent in paints, as an additive in animal feed, and as an etchant for copper in the manufacture of printed circuit boards. It can also be dissolved in alcohol to form tincture of iron. The other halides tend to be limited to laboratory uses.

Iron(II) sulfate is used as a precursor to other iron compounds. It is also used to reduce chromate in cement. It is used to fortify foods and treat iron deficiency anemia. These are its main uses. Iron(III) sulfate is used in settling minute sewage particles in tank water. Iron(II) chloride is used as a reducing flocculating agent, in the formation of iron complexes and magnetic iron oxides, and as a reducing agent in organic synthesis.

Biological role

Structure of Heme b, in the protein additional ligand(s) would be attached to Fe.

Main article: Human iron metabolism

Iron is a necessary trace element found in nearly all living organisms. Iron-containing enzymes and proteins, often containing heme prosthetic groups, participate in many biological oxidations and in transport. Examples of proteins found in higher organisms include hemoglobin, cytochrome, and catalase.

Uptake and storage

In cells, iron storage is carefully regulated, "free" iron does not exist as such. A major component of this regulation is the protein transferrin, which binds iron absorbed from the duodenum and carries it in the blood to cells. In animals, plants, and fungi, iron is often the metal ion incorporated into the heme complex. Heme is an essential component of cytochrome proteins, which mediate redox reactions, and of oxygen carrier proteins such as hemoglobin, myoglobin, and leghemoglobin. Inorganic iron also contributes to redox reactions in the iron-sulfur clusters of many enzymes, such as nitrogenase (involved in the synthesis of ammonia from nitrogen and hydrogen) and hydrogenase. Non-heme iron proteins include the enzymes methane monooxygenase (oxidizes methane to methanol), ribonucleotide reductase (reduces ribose to deoxyribose; DNA biosynthesis), hemerythrins (oxygen transport and fixation in Marine invertebrates) and purple acid phosphatase (hydrolysis of phosphate esters).

Iron distribution is heavily regulated in mammals, partly because iron has a high potential for biological toxicity.

Iron acquisition poses a problem for aerobic organisms because ferric iron is poorly soluble near neutral pH. Thus, bacteria have evolved high-affinity sequestering agents called siderophores.

Health and diet

Main article: Iron deficiency (medicine)

Iron is pervasive, but particularly rich sources of dietary iron include red meat, lentils, beans, poultry, fish, leaf vegetables, tofu, chickpeas, black-eyed peas, blackstrap molasses, fortified bread, and fortified breakfast cereals. Iron in low amounts is found in molasses, teff and farina. Iron in meat (haem iron) is more easily absorbed than iron in vegetables. Although most studies suggest that heme/hemoglobin from red meat has effects which may increase the likelihood of colorectal cancer, there is still some controversy, and even a few studies suggesting that there is not enough evidence to support such claims.

Iron provided by dietary supplements is often found as iron(II) fumarate, although iron sulfate is cheaper and is absorbed equally well. Elemental iron, despite being absorbed to a much smaller extent (stomach acid is sufficient to convert some of it to ferrous iron), is often added to foods such as breakfast cereals or "enriched" wheat flour (where it is listed as "reduced iron" in the list of ingredients). Iron is most available to the body when chelated to amino acids—iron in this form is 10 to 15 times more bioavailable than any other, and is also available for use as a common iron supplement. Often the amino acid chosen for this purpose is the cheapest and most common amino acid, glycine, leading to "iron glycinate" supplements. The Recommended Dietary Allowance (RDA) for iron varies considerably based on age, gender, and source of dietary iron (heme-based iron has higher bioavailability). Infants may require iron supplements if they are bottle-fed cow's milk. Blood donors and pregnant women are at special risk of low iron levels and are often advised to supplement their iron intake.

Regulation of uptake

Main article: Hepcidin

Iron uptake is tightly regulated by the human body, which has no regulated physiological means of excreting iron. Only small amounts of iron are lost daily due to mucosal and skin epithelial cell sloughing, so control of iron levels is mostly by regulating uptake. Regulation of iron uptake is impaired in some people as a result of a genetic defect that maps to the HLA-H gene region on chromosome 6. In these people, excessive iron intake can result in iron overload disorders, such as hemochromatosis. Many people have a genetic susceptibility to iron overload without realizing it or being aware of a family history of the problem. For this reason, it is advised that people do not take iron supplements unless they suffer from iron deficiency and have consulted a doctor. Hemochromatosis is estimated to cause disease in between 0.3 and 0.8% of Caucasians.

MRI finds that iron accumulates in the hippocampus of the brains of those with Alzheimer's disease and in the substantia nigra of those with Parkinson disease.

Precautions

NFPA 704
NFPA 704 safety square 3 1 1
Fire diamond for powdered iron metal

Main article: Iron poisoning

Large amounts of ingested iron can cause excessive levels of iron in the blood. High blood levels of free ferrous iron react with peroxides to produce free radicals, which are highly reactive and can damage DNA, proteins, lipids, and other cellular components. Thus, iron toxicity occurs when there is free iron in the cell, which generally occurs when iron levels exceed the capacity of transferrin to bind the iron. Damage to the cells of the gastrointestinal tract can also prevent them from regulating iron absorption leading to further increases in blood levels. Iron typically damages cells in the heart, liver and elsewhere, which can cause significant adverse effects, including coma, metabolic acidosis, shock, liver failure, coagulopathy, adult respiratory distress syndrome, long-term organ damage, and even death. Humans experience iron toxicity above 20 milligrams of iron for every kilogram of mass, and 60 milligrams per kilogram is considered a lethal dose. Overconsumption of iron, often the result of children eating large quantities of ferrous sulfate tablets intended for adult consumption, is one of the most common toxicological causes of death in children under six. The Dietary Reference Intake (DRI) lists the Tolerable Upper Intake Level (UL) for adults as 45 mg/day. For children under fourteen years old the UL is 40 mg/day.

The medical management of iron toxicity is complicated, and can include use of a specific chelating agent called deferoxamine to bind and expel excess iron from the body.

See also

• El Mutún in Bolivia, where 20% of the world's accessible iron and iron is located.
• Iron fertilization - Proposed fertilization of oceans to stimulate phytoplankton growth.
• Iron (metaphor)
• Iron in mythology
• List of countries by iron production
• Pelletising - Process of creation of iron ore pellets.
• Rustproof iron

Books

• H. R. Schubert, History of the British Iron and Steel Industry ... to 1775 AD (Routledge, London, 1957)
• R. F. Tylecote, History of Metallurgy (Institute of Materials, London 1992).
• R. F. Tylecote, 'Iron in the Industrial Revolution' in J. Day and R. F. Tylecote, The Industrial Revolution in Metals (Institute of Materials 1991), 200-60.
• Weeks, Mary Elvira (1968). "Elements Known to the Ancients". Discovery of the Elements. Easton, PA: Journal of Chemical Education. pp. 29–40. LCCCN 68-15217. {{cite book}}: Unknown parameter |coauthor= ignored (|author= suggested) (help)CS1 maint: ref duplicates default (link)

External links

• WebElements.com – Iron
• It's Elemental – Iron
• The Most Tightly Bound Nuclei
• Crystal structure of iron
• Chemistry in its element podcast (MP3) from the Royal Society of Chemistry's Chemistry World: Iron