Jump to content

Talk:PSK31

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 86.170.182.192 (talk) at 18:21, 30 September 2010. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

WikiProject iconAmateur radio B‑class Mid‑importance
WikiProject iconThis article is within the scope of WikiProject Amateur radio, which collaborates on articles related to amateur radio technology, organizations, and activities. If you would like to participate, you can edit the article attached to this page, or visit the project page, where you can join the project and/or contribute to the discussion.Amateur radioWikipedia:WikiProject Amateur radioTemplate:WikiProject Amateur radioamateur radio
BThis article has been rated as B-class on Wikipedia's content assessment scale.
MidThis article has been rated as Mid-importance on the project's importance scale.
To-do list:

Improve to GA-Class:

Expand and improve:

Create:

Bandwidth

The image doesn't show PSK31 bandwidth. LeighKlotz

Sound Sample

There is no sound sample. LeighKlotz

AM Modulation

PSK is not produced by modulating the RF carrier directly; that would produce AM. LeighKlotz

I believe PSK is usually FM modulated, although I think it can be AM modulated. This is true for most data radio modulation modes, even standard TV signals. Esentially, the data is modulated to an audio frequency signal, which is in turn modulated, usually with AM or FM. --ssd 15:40, 24 December 2005 (UTC)[reply]

PSK31 uses Single sideband modulation - while one could use FM or AM to send the audio generated by a PSK program, the resulting signal would NOT be a PSK31 waveform, and would NOT have the narrow bandwidth of PSK31. In effect, the computer + the SSB transmitter form a Software defined radio with the first local oscillator being the numerically-controlled oscillator in the PSK software and the first intermediate frequency being the audio signal out of the soundcard. N0YKG 19:54, 10 April 2006 (UTC)[reply]

CB

Somebody wrote: "A serious user of the Citizen's Band is an oxymoron". Well, first thanks for your comment, which really added much value to the page. I can't speak for the USA, but here in Europe we have some CBers who take their art seriously. Some who I have spoken with could probably just walk into the Advanced exam and pass it with flying colours. They just don't want to, as they prefer the friendly, inclusive atmosphere of CB to the self-righteous, cliquish, 'anal' image of ham radio that such comments project. Chris G4PDJ 08:08, 8 February 2007 (UTC)[reply]

Emission Code

Not wishing to open a can of worms, but what is the correct emission code for PSK31?. I make it 'J1B' (i.e. 'J' = SSB with suppressed - or nowadays - 'no' carrier; '1' = One channel containing digital information, and 'B' = Automatic telegraphy for machines to read). To be honest, I just write 'PSK', ' Ritty', 'CW' or 'SSB' in my log, but just wondering :-) 86.170.182.192 (talk) 01:00, 29 September 2010 (UTC)[reply]

  • It would be G1B G for phase modulation. Graeme Bartlett (talk) 12:10, 29 September 2010 (UTC)[reply]
    • Hmmm...That was my first thought too, but you are not phasing the carrier, you are phasing the sideband. I'll just write 'PSK', and if the man from the RA doesn't know what that means, He's in the wrong job :-)86.170.182.192 (talk) 12:54, 30 September 2010 (UTC)[reply]
    • Second thoughts. I've read through Peter M's article three times now. There is one confusing reference in there about the phase shifts being like swapping the wires of a twin feeder over 31 times a second. That would be phase-shift keying, but PSK31 is (as Peter says) just like high-speed morse. It is purely a sound signal. You can cross-connect two computers and send PSK31 back-and-to between them without any carrier (or for that matter even a radio) being involved. In fact, if my laptop's microphone 'hears' my rig, it can even read the code through air!. The PSK 'idle' signal (i.e 'constant reversals') is identical to a stream of high-speed morse 'dits', and 'no reversal' is a 'dah', but only twice as long and not three times longer like morse. To read PSK, the software looks at the audio waveform and compares it to how it was 90 degrees ago. If the voltage is the same then that is one state, and if they are different that is the other state. Really really clever, simple and elegant. Therefore I would say that the emission code is the same as for very high speed machine-readable morse, not 'on-off keyed', but sent as audio 'beeps' through the microphone. So it's 'J1B' for an SSB transmitter; 'F1B' for an FM one, etc. etc. 86.170.182.192 (talk) 18:21, 30 September 2010 (UTC)[reply]
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Talk:PSK31&oldid=387957340"