Talk:W engine

????

In the Dutch version of this article it is stated that a V-engine with two crankshafts (one for each bank of cilinders) is also known as a W-engine, applied by Yamaha and Cagiva in their racing bikes for the Supersport and/or Superbike class. Before I add this third type of W-engine to this article, can anyone confirm that these types of engines exist and are indeed called W-engines? I am not certain whether the Dutch article is correct. Waldorf 12:55, 21 Mar 2005 (UTC)

The only auto engine I have ever heard of with two crankshafts was Bugatti's U engine. That's the only name I've heard that type called. --SFoskett 19:31, Mar 21, 2005 (UTC)

I have already figured it out: see the article. Thanks for your input. Waldorf 19:41, 21 Mar 2005 (UTC)

MotoGP motorbikes are now equipped with 4-stroke 1000cc engines!!!

Under the motorcycle section it says: There are two major advantages of these engines over the more traditional straight-4 or V4 engines. The first is the width of the engine: a V4 engine will be narrower than a straight-4 engine with the same displacement, but a W4 with its two crankshafts will be even smaller. The second advantage is that the W4 lacks the need for a balance shaft; it will run smoothly if the two crankshafts rotate in opposite directions. This is a weight advantage over the V4 engine, which will need a balance shaft.

However: The actual reason for the two crankshafts in these motorcycles (and others of the same era) was to provide individual crankcases for each cylinder because they are crankcase charged two-stroke engines, a single crank V wouldn't work.

Also its unlikely that the weight imposed by the addtition of a crankshaft would be less than that required for a balancer shaft. The reason for the V4 (I don't understand why its a W4) configuration was purely to make a more compact engine and consequently a more compact motorcycle. It was logical for the two crankshafts to be geared together, therefor the counter-rotation was easily accomodated and probably also reduced vibration though this would have been a secondary consideration. jaf

Veyron W16

Could Someone check the cylinder measures in the following text:

"The W-Engine in the Bugatti In 2006, Bugatti produced the "Bugatti Veyron", with a W-16 engine, combined with 4 turbochargers, it produces 1001 bhp@6000 r.p.m, but it takes 64 valves to operate that 8.0 Liters engine with DOHC (Double overhead cams), and Bore/Stroke ratio 1:1 (82 mm:82 mm)."

As far as I can tell (and calculate) the given 82 mm bore and stroke times 16 makes around 6,9 liters, not 8, so these figures must be incorrect. (r^2 * Pii * h * n; where r = cylinder bore radius, h = length of stroke, n = number of cylinders; 41mm^2 * pii * 82mm * 16 ~ 6928694,6 mm^3 ~ 6928,7 cm^3 ~ 6,9 dm^3/liters ) —Preceding unsigned comment added by 80.220.135.173 (talk) 15:09, 22 October 2007 (UTC)

Isn't the Feuling W3 a traditional three-bank engine?

How does the Feuling W3 differ from the Napier Lion-style W-engine? Respectfully, SamBlob (talk) 19:11, 1 April 2008 (UTC)

Why isn't the "motorcycle 2-bank" like a "U" again?

The text under "motorcycle 2-bank" says it's not like a U, another 2-bank/2-crankshaft design. But, why not? Can't tell from the text. Is it just because the 2 banks are inclined rather than parallel? --71.198.34.87 (talk) 02:20, 7 October 2009 (UTC)

Engine Balance.

Can we get a section in this Wiki that discusses engine balance? Almost every other Wiki regarding engine configuration has a section devoted to detailing the engines balance. —Preceding unsigned comment added by 71.184.250.60 (talk) 23:30, 25 July 2010 (UTC)

VW Group W8 and W12

Are there any sources to support the claim that the W8 was a "testbed" for the W12? Both seem to have entered production around 2001. This article doesn't give the impression the W8 preceded the W12. Letdorf (talk) 21:34, 10 January 2011 (UTC).