Jump to content

.500 Maximum

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 216.205.213.53 (talk) at 21:20, 8 February 2011 (The statement given is false, none of the loads shown on this page are equal to many of the readily available loadings available for the 500 S&W Magnum, and the link used to 'source' this claim isdead). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

.500 Maximum
TypeRevolver cartridge
Place of originUnited States
Production history
DesignerJohn Linebaugh
Specifications
Bullet diameter0.512 in (13.0 mm)
Rim diameter0.600 in (15.2 mm)
Case length1.610 in (40.9 mm)
Ballistic performance
Bullet mass/type Velocity Energy
400 gr (26 g) JSP 1,407 ft/s (429 m/s) 2393 J
407 gr (26 g) LBT
420 gr (27 g) LBT
1,512 ft/s (461 m/s)
1,508 ft/s (460 m/s)
?
2805 J
425 gr (28 g) LSWC
435 gr (28.2 g) LBT
1,553 ft/s (473 m/s)
1,467 ft/s (447 m/s)
?
2817 J
440 gr (29 g)
450 gr (29.2 g) JSP
1,550 ft/s (470 m/s)
1,383 ft/s (422 m/s)
?
?
515 gr (33 g)
580 gr (38 g) LBT-LFN
1,388 ft/s (423 m/s)
1,202 ft/s (366 m/s)
?
?
Test barrel length: 5"
Source(s): Tafin Tests[1], Tafin Tests[2]
Jack Huntington .500 Maximum

The .500 Maximum, also known as .500 Linebaugh Maximum and .500 Linebaugh Long, is a revolver cartridge developed by John Linebaugh.<ref>[http://www.sixguns.com/tests/tt500max.htm Taffin Tests :

Only a small number of custom made 5-shot single action revolvers, such as the BMF .500 Maximum manufactured by Gary Reeder Custom Guns, the Ruger Bowen .500 Maximum manufactured by Bowen Classic Arms Corporation and revolvers manufactured by John Linebaugh or Jack Huntington, are being chambered for this round, with a barrel length of up to 6.5" with no muzzle brake or ports.

References