Gibson Sonex
Gibson Sonex | |
---|---|
Manufacturer | Gibson |
Period | 1980–1984 |
Construction | |
Body type | Solid |
Neck joint | Bolt-on neck |
Scale | 24.75" |
Woods | |
Body | Resonwood |
Neck | Maple |
Fretboard | Rosewood |
Hardware | |
Bridge | tune-o-matic adjustable |
Pickup(s) | Zebra Humbuckers |
Colors available | |
Offwhite, Silver, Candy Apple (Red), Ebony (Black) |
The Sonex guitars were a range of budget Gibsons launched in 1980. They were made from a material called Resonwood, and manufactured with Multi-phonic body construction. There were four models: Deluxe, Standard, Custom and Artist.
They were an entry level instrument, replacing the Marauder and S-1 guitars. Like these two instruments, the Sonex took its styling from the Les Paul guitars that had been popular for the previous decades, but using Resonwood instead of mahogany, bolt-on necks instead of set (glued-in) necks, and far less ornamentation.
At its launch in mid 1980, the Sonex 180 Deluxe cost $299 which was Gibson's cheapest instrument. The Standard was $375, Custom $449 - all cheaper than the next model, the 335S at $499.
There were four guitar models to choose from in the Sonex Series, all with the Gibson single cutaway design. The Sonex-180 Deluxe featured a rosewood, dot inlayed fingerboard and adjustable exposed coil high output Sonex Humbuckers. All came with a three-position pick-up selector switch, Tune-0-Matic Bridge', stop bar tailpiece and volume/tone control speed knobs.
In 1981, the Standard had been dropped replaced by the Artist series, which was priced at $749. By 1982 the Custom had been discontinued. By 1984 only the Deluxe was left priced at $419.
Unlike the Deluxe, the Standard and Custom models featured the famous zebra Gibson 'Dirty Fingers' pickups, plus a coil top switch. The Custom has a three-piece maple neck and ebony fingerboard. The Custom was available in white finish, as well as ebony.
External links
- The Vintage Guitar Website - Gibson Sonex
- Sonex Guitars at Zuitar Guitar DataBase