FN FNX
FNX Series | |
---|---|
Type | Semi-automatic pistol |
Place of origin | |
Service history | |
Used by | See Users |
Production history | |
Manufacturer | FNH USA |
Variants | See Variants:
|
Specifications | |
Mass | Unloaded: |
Length | |
Barrel length | |
Width | |
Height | |
Cartridge | |
Feed system | Detachable box magazine; capacities: |
Sights | 3-dot white |
The FN Herstal FNX pistol is a series of semi-automatic, polymer-framed pistols manufactured in Columbia, SC, by FNH USA, a division of Fabrique Nationale d'Herstal.[3] The pistol is chambered for the 9x19mm Parabellum and .40 S&W cartridges.
Standard Features
All variations of the pistols include ambidextrous safety/decocking levers, magazine releases, and slide stops.[4] All variations also include a Picatinny accessory rail, fixed three-dot combat sights, and a loaded chamber indicator on the right side. New models are sold in a plastic hard case with three magazines, and a total of four interchangeable backstraps.
Field stripping is accomplished by locking the slide to the rear, rotating the takedown lever clockwise ninety degrees and releasing the slide stop while carefully allowing the slide to be pushed forward out of the frame. The barrel and recoil spring then separate from the slide to complete the disassembly procedure.
Variants
As of the beginning of 2011, FN Herstal produces no variants of the FNX pistol.
Users
There are no known official users of the FNX pistol as of early 2011.
References
- ^ a b c d e f g "FNX-9, DA/SA, Matte Black Handgun". FNH USA. Retrieved March 29, 2011.
- ^ a b c d e f g "FNX-40, DA/SA, Matte Black Stainless Handgun". FNH USA. Retrieved March 29, 2011.
- ^ FNX pistols are made in Columbia, SC, although marked with "Fredericksburg, VA" on the slide, indicating not the place of manufacture but the registered location of FNH's Federal Firearms License. http://www.fnhusa.com/le/about.asp
- ^ FNH USA FNX Autoloading Pistol Owner's Manual (PDF), 2010
{{citation}}
: Cite has empty unknown parameters:|chapterurl=
and|month=
(help)