Jump to content

0-4-4T

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Harveyqs (talk | contribs) at 17:04, 15 January 2012. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

British LSWR O2 Class 0-4-4T

Under the Whyte notation for the classification of steam locomotives, 0-4-4 represents the wheel arrangement of no leading wheels, four powered and coupled driving wheels on two axles, and four trailing wheels on two axles. This type was only used for tank locomotives.

In American cities, the type known as a Forney locomotive, was used on on the narrow curves of elevated railways and other rapid transit lines . In the UK 0-4-4 tanks were mainly used for suburban or rural passenger duties.

Equivalent classifications

Other equivalent classifications are:

History

Finland

Class F1 entered service 1885 used until 1835.
This Forney locomotive was made by SLM, Winterthur, Switzerland in 1886, and it was used on the Finnish State Railways in 1886-1932.

Image:Finland SocieteSuisse3.JPG|thumb|left| Builder's Plate of Swiss Locomotive and Machine Works Societe Suisse locomotive No 434 of 1886 0-4-4T at the Finnish Railway Museum

UK

In the UK the earliest 0-4-4's were well tanks. Both John Chester Craven of the London Brighton and South Coast Railway and James Cudworth of the South Eastern Railway (UK) introduced classes in 1866.[1] They were followed by Matthew Kirtley on the Midland Railway(26 locomotive built 1869-70) and Patrick Stirling on the Great Northern Railway (48 locomotive built 1873-81).[2] The more common side-tank version was introduced on the Great Eastern Railway by Samuel W. Johnson in 1872, and was soon afterwards adopted by most mainline railways in the UK, and became the standard configuration for a passenger tank locomotive until about 1900. Examples have included the LSWR O2 Class, Midland Railway 2228 Class, the LSWR M7 Class and the Caledonian Railway 439 Class. The last British design of 0-4-4T were the LMS Stanier 0-4-4T of 1932 which were based on the Midland Railway 2228 Class.

USA

The 0-4-4 configuration was an enlargement of the 0-4-2 type and appears to have been introduced in the USA, with the Forney locomotive, was patented by Matthias N. Forney between 1861 and 1864. These were characterized by a single frame under the boiler and fuel/water tank, which is supported at the rear by the truck under the coal bunker/water tank. The locomotives were designed to run cab (or bunker) first and were built for commuter lines in cities such as New York, Chicago and Boston.

References

  1. ^ Bertram Baxter, British Locomotive Catalogue 1825-1923, Vol.1 Wayland Publishing. 1977. ISBN 0-903485-50-8.
  2. ^ Baxter (1977).