Jump to content

Mean longitude

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 76.178.146.41 (talk) at 05:14, 21 February 2012 (typesetting). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

In astrodynamics and celestial mechanics, mean longitude is the longitude at which an orbiting body could be found if its orbit were circular, and free of perturbations, and if its inclination were zero.

Description

Both the mean longitude and the true longitude of the body in such an orbit would change at a constant rate over time[1] [2] [3]. But if the orbit is eccentric and departs from circularity (and let it still be supposed free from any perturbations), then the orbit would become a Keplerian ellipse, and then the progress of the orbiting body in true longitude along this orbit would no longer change at a constant rate over time. The mean longitude then becomes an abstracted quantity, still proportional to the time, but now only indirectly related to the position of the orbiting body: the difference between the mean longitude and the true longitude is usually called the equation of the center. In such an elliptical orbit, the only times when the mean longitude is equal to the true longitude are the times when the orbiting body passes through periapsis (or pericenter) and apoapsis (or apocenter).

In an orbit that is undergoing perturbations, an osculating orbit together with its (elliptical) osculating elements can still be defined for any point in time along the actual orbit. For each successive set of osculating elements, a mean longitude can be defined, as in the unperturbed case. But here, the changes in mean longitude over time will not only be those due to some constant rate over time; there will also be superimposed perturbations (and the rate itself is also perturbed). A set of mean elements can still be defined for such an orbit, after abstracting the perturbational variations with time. The term 'mean longitude' was already used for the unperturbed and osculating cases, and the corresponding mean longitude member in a set of mean elements, after abstraction of the periodic variations, is sometimes therefore called the 'mean mean longitude'. To arrive at a true longitude from a mean mean longitude, the perturbational terms must be applied as well as the equation of the center.

Calculation

The mean longitude can be calculated as follows: [2]

where:

References

  1. ^ Multon, F. R. (1970). An Introduction to Celestial Mechanics, 2nd ed., p. 182–183. New York, NY: Dover.
  2. ^ a b Roy, A. E. (1978). Orbital Motion, p. 174, (ISBN 0-470-99251-4). New York, NY: John Wiley & Sons.
  3. ^ Brouwer, D., & Clemence, G. M. (1961). Methods of Celestial Mechanics, p. 45. New York, NY: Academic Press.