Jump to content

DRG Class 80

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by EmausBot (talk | contribs) at 20:33, 11 May 2012 (r2.7.3) (Robot: Modifying de:DR-Baureihe 80). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

DRG Class 80
80 013 in Neuenmarkt-Wirsberg
Type and origin
BuilderHohenzollern (001–005, 018–022, 028–039)
Union (006–012)
Wolf (013–017)
Jung (023–027)
Build date1927–1928
Total produced39
Specifications
Configuration:
 • Whyte0-6-0
 • GermanGt 33.17
Gauge1,435 mm
Driver dia.1,100 mm
Length:
 • Over buffers9,670 mm
Axle load18.2 t
Adhesive weight54.4 t
Service weight54.4 t
Firebox:
 • Grate area1.54 m²
Boiler pressure14 bar
Heating surface69.62 m²
Superheater:
 • Heating area25.50 m²
Cylinders2
Cylinder size450 mm
Piston stroke550 mm
Loco brakeDirect-release Knorr compressed-air brakes
Auxiliary brakeyes
Parking brakeK-GP mZ counterweight handbrake
Performance figures
Maximum speed45 km/h
Indicated power423 kW
Career
Numbers80 001–039
Retired1977

The Class 80 tank engines were German standard locomotives (Einheitsloks) with the Deutsche Reichsbahn. They were intended to replace the aging, rickety state railway line engines performing shunting duties in their dotage at large stations.

History

Between 1927 and 1928 39 vehicles were produced, having been built in the locomotive factories of Jung in Jungenthal, Union Gießerei in Königsberg, Wolf and Hohenzollern. With the development of the Class 80, a relatively economical and simple locomotive class, it was hoped that the cost of shunting duties would come down.

After they had been on duty, prior to the Second World War, primarily in the area of Leipzig (including the shunting of post vans) and Cologne, 22 units went into the DR in East Germany, post-1945, and 17 to the Deutsche Bundesbahn. They were in service with the DR until 1968.

In the Federal Republic of Germany, the last Bundesbahn engine was taken out of service in 1965. Several examples survived in the Ruhrgebiet until 1977 as industrial locomotives with the Ruhrkohle AG.

Preserved Locomotives

80 039 with its Hamm Museum Railway train near Uentrop

A total of seven locomotives of this class have been preserved:

In fiction

The character "Puffa" from TUGS is a Marklin Gauge-1 DRG Class 80 - fitted with a cowcatcher - to resemble an American locomotive. Another Marklin Class 80 was used in the first season of Thomas the Tank Engine; its purpose was to haul background rolling stock. This engine has been dubbed by some fans as "The Marklin Engine." [citation needed]

See also

Sources