Curvature

In mathematics, curvature refers to any of a number of loosely related concepts in different areas of geometry. Intuitively, curvature is the amount by which a geometric object deviates from being flat, or straight in the case of a line, but this is defined in different ways depending on the context. There is a key distinction between extrinsic curvature, which is defined for objects embedded in another space (usually a Euclidean space) in a way that relates to the radius of curvature of circles that touch the object, and intrinsic curvature, which is defined at each point in a Riemannian manifold. This article deals primarily with the first concept.

The canonical example of extrinsic curvature is that of a circle, which everywhere has curvature equal to the reciprocal of its radius. Smaller circles bend more sharply, and hence have higher curvature. The curvature of a smooth curve is defined as the curvature of its osculating circle at each point.

In a plane, this is a scalar quantity, but in three or more dimensions it is described by a curvature vector that takes into account the direction of the bend as well as its sharpness. The curvature of more complex objects (such as surfaces or even curved n-dimensional spaces) is described by more complex objects from linear algebra, such as the general Riemann curvature tensor.

The remainder of this article discusses, from a mathematical perspective, some geometric examples of curvature: the curvature of a curve embedded in a plane and the curvature of a surface in Euclidean space. See the links below for further reading.

Curvature of plane curves

Cauchy defined the center of curvature C as the intersection point of two infinitely close normals to the curve, the radius of curvature as the distance from the point to C, and the curvature itself as the inverse of the radius of curvature.

Let C be a plane curve (the precise technical assumptions are given below). The curvature of C at a point is a measure of how sensitive its tangent line is to moving the point to other nearby points. There are a number of equivalent ways that this idea can be made precise.

float

One way is geometrical. It is natural to define the curvature of a straight line to be identically zero. The curvature of a circle of radius R should be large if R is small and small if R is large. Thus the curvature of a circle is defined to be the reciprocal of the radius:

$\kappa ={\frac {1}{R}}.$

Given any curve C and a point P on it, there is a unique circle or line which most closely approximates the curve near P, the osculating circle at P. The curvature of C at P is then defined to be the curvature of that circle or line. The radius of curvature is defined as the reciprocal of the curvature.

Another way to understand the curvature is physical. Suppose that a particle moves along the curve with unit speed. Taking the time s as the parameter for C, this provides a natural parametrization for the curve. The unit tangent vector T (which is also the velocity vector, since the particle is moving with unit speed) also depends on time. The curvature is then the magnitude of the rate of change of T. Symbolically,

$\kappa =\left\|{\frac {d\mathbf {T} }{ds}}\right\|.$

The T and N vectors at two points on a plane curve, a translated version of the second frame (dotted), and the change in T: δT'. δs is the distance between the points. In the limit ${\tfrac {d\mathbf {T} }{ds}}$ will be in the direction N and the curvature describes the speed of rotation of the frame.

This is the magnitude of the acceleration of the particle and the vector $d\mathbf {T} /ds$ is the acceleration vector. Geometrically, the curvature $\kappa$ measures how fast the unit tangent vector to the curve rotates. If a curve keeps close to the same direction, the unit tangent vector changes very little and the curvature is small; where the curve undergoes a tight turn, the curvature is large.

These two approaches to the curvature are related geometrically by the following observation. In the first definition, the curvature of a circle is equal to the ratio of the angle of an arc to its length. Likewise, the curvature of a plane curve at any point is the limiting ratio of dθ, an infinitesimal angle (in radians) between tangents to that curve at the ends of an infinitesimal segment of the curve, to the length of that segment ds, i.e., dθ/ds. If the tangents at the ends of the segment are represented by unit vectors, it is easy to show that in this limit, the magnitude of the difference vector is equal to dθ, which leads to the given expression in the second definition of curvature.

Precise definition

Suppose that C is a twice continuously differentiable immersed plane curve, which here means that there exists parametric representation of C by a pair of functions γ(t) = (x(t), y(t)) such that the first and second derivatives of x and y both exist and are continuous, and

$\|\gamma '\|^{2}=x'(t)^{2}+y'(t)^{2}\not =0$

throughout the domain. For such a plane curve, there exists a reparametrization with respect to arc length s. This is a parametrization of C such that

$\|\gamma '\|^{2}=x'(s)^{2}+y'(s)^{2}=1.$

The velocity vector T(s) is the unit tangent vector. The unit normal vector N(s), the curvature κ(s), the oriented or signed curvature k(s), and the radius of curvature R(s) are given by

$\mathbf {T} (s)=\gamma '(s),\quad \mathbf {T} '(s)=k(s)\mathbf {N} (s),\quad \kappa (s)=\|\mathbf {T} '(s)\|=\|\gamma ''(s)\|=\left|k(s)\right|,\quad R(s)={\frac {1}{\kappa (s)}}.$

Expressions for calculating the curvature in arbitrary coordinate systems are given below.

Animations of the signed curvature and the acceleration vector $\mathbf {T} '(s)$

Signed curvature

The sign of the signed curvature k indicates the direction in which the unit tangent vector rotates as a function of the parameter along the curve. If the unit tangent rotates counterclockwise, then k > 0. If it rotates clockwise, then k < 0.

The signed curvature depends on the particular parametrization chosen for a curve. For example the unit circle can be parametrised by (cos(θ),sin(θ)) (counterclockwise, with k > 0), or by (cos(−θ),sin(−θ)) (clockwise, with k < 0). More precisely, the signed curvature depends only on the choice of orientation of an immersed curve. Every immersed curve in the plane admits two possible orientations.

Local expressions

See also: Centripetal force § Alternative approach

For a plane curve given parametrically in Cartesian coordinates as γ(t) = (x(t),y(t)), the curvature is

$\kappa ={\frac {|x'y''-y'x''|}{(x'^{2}+y'^{2})^{3/2}}},$

where primes refer to derivatives with respect to parameter  t . The signed curvature  k  is

$k={\frac {x'y''-y'x''}{(x'^{2}+y'^{2})^{3/2}}}.$

These can be expressed in a coordinate-independent manner via

$k={\frac {\det(\gamma ',\gamma '')}{\|\gamma '\|^{3}}},\ \ \ \kappa ={\frac {|\det(\gamma ',\gamma '')|}{\|\gamma '\|^{3}}}.$

Curvature of a graph

For the less general case of a plane curve given explicitly as $y=f(x)$, and now using primes for derivatives with respect to coordinate  x , the curvature is

$\kappa ={\frac {|y''|}{(1+y'^{2})^{3/2}}}$ ,

and the signed curvature is

$k={\frac {y''}{(1+y'^{2})^{3/2}}}$ .

This quantity is common in physics and engineering; for example, in the equations of bending in beams, the 1D vibration of a tense string, approximations to the fluid flow around surfaces (in aeronautics), and the free surface boundary conditions in ocean waves. In such applications, the assumption is almost always made that the slope is small compared with unity, so that the approximation:

$\kappa \approx \left|{\frac {d^{2}y}{dx^{2}}}\right|$

may be used. This approximation yields a straightforward linear equation describing the phenomenon.

If a curve is defined in polar coordinates as $r(\theta )$, then its curvature is

$\kappa (\theta )={\frac {|r^{2}+2r'^{2}-rr''|}{\left(r^{2}+r'^{2}\right)^{3/2}}}$

where here the prime now refers to differentiation with respect to $\theta$.

Example

Consider the parabola y = x². We can parametrize the curve simply as γ(t) = (t,t²) = (x,y). If we use primes for derivatives with respect to parameter  t , then

$x'=1,\quad x''=0,\quad y'=2t,\quad y''=2.$

Substituting and dropping unnecessary absolute values, get

$\kappa (t)=\left|{\frac {x'y''-y'x''}{({x'^{2}+y'^{2}})^{3/2}}}\right|={1\cdot 2-(2t)(0) \over (1+(2t)^{2})^{3/2}}={2 \over (1+4t^{2})^{3/2}}.$

Curvature of space curves

Animation of the curvature and the acceleration vector $\mathbf {T} '(s)$

As in the case of curves in two dimensions, the curvature of a regular space curve C in three dimensions (and higher) is the magnitude of the acceleration of a particle moving with unit speed along a curve. Thus if γ(s) is the arclength parametrization of C then the unit tangent vector T(s) is given by

$\mathbf {T} (s)=\gamma '(s)$

and the curvature is the magnitude of the acceleration:

$\kappa (s)=\|\mathbf {T} '(s)\|=\|\gamma ''(s)\|.$

The direction of the acceleration is the unit normal vector N(s), which is defined by

$\mathbf {N} (s)={\frac {\mathbf {T} '(s)}{\|\mathbf {T} '(s)\|}}.$

The plane containing the two vectors T(s) and N(s) is called the osculating plane to the curve at γ(s). The curvature has the following geometrical interpretation. There exists a circle in the osculating plane tangent to γ(s) whose Taylor series to second order at the point of contact agrees with that of γ(s). This is the osculating circle to the curve. The radius of the circle R(s) is called the radius of curvature, and the curvature is the reciprocal of the radius of curvature:

$\kappa (s)={\frac {1}{R(s)}}.$

The tangent, curvature, and normal vector together describe the second-order behavior of a curve near a point. In three-dimensions, the third order behavior of a curve is described by a related notion of torsion, which measures the extent to which a curve tends to perform a corkscrew in space. The torsion and curvature are related by the Frenet–Serret formulas (in three dimensions) and their generalization (in higher dimensions).

Local expressions

For a parametrically defined space curve in three-dimensions given in Cartesian coordinates by γ(t) = (x(t),y(t),z(t)), the curvature is

$\kappa ={\frac {\sqrt {(z''y'-y''z')^{2}+(x''z'-z''x')^{2}+(y''x'-x''y')^{2}}}{(x'^{2}+y'^{2}+z'^{2})^{3/2}}}.$

where the prime denotes differentiation with respect to time t. This can be expressed independently of the coordinate system by means of the formula

$\kappa ={\frac {|\gamma '\times \gamma ''|}{|\gamma '|^{3}}}$

where $\times$ is the vector cross product. Equivalently,

$\kappa ={\frac {\sqrt {\det \left((\gamma ',\gamma '')^{t}(\gamma ',\gamma '')\right)}}{\|\gamma '\|^{3}}}.$

Here the t denotes the matrix transpose. This last formula is also valid for the curvature of curves in a Euclidean space of any dimension.

Curvature from arc and chord length

Given two points P and Q on C, let s(P,Q) be the arc length of the portion of the curve between P and Q and let d(P,Q) denote the length of the line segment from P to Q. The curvature of C at P is given by the limit

$\kappa (P)=\lim _{Q\to P}{\sqrt {\frac {24\left(s(P,Q)-d(P,Q)\right)}{s(P,Q)^{3}}}}$

where the limit is taken as the point Q approaches P on C. The denominator can equally well be taken to be d(P,Q)³. The formula is valid in any dimension. Furthermore, by considering the limit independently on either side of P, this definition of the curvature can sometimes accommodate a singularity at P. The formula follows by verifying it for the osculating circle.

Curves on surfaces

When a one dimensional curve lies on a two dimensional surface embedded in three dimensions R³, further measures of curvature are available, which take the surface's unit-normal vector, u into account. These are the normal curvature, geodesic curvature and geodesic torsion. Any non-singular curve on a smooth surface will have its tangent vector T lying in the tangent plane of the surface orthogonal to the normal vector. The normal curvature, k_n, is the curvature of the curve projected onto the plane containing the curve's tangent T and the surface normal u; the geodesic curvature, k_g, is the curvature of the curve projected onto the surface's tangent plane; and the geodesic torsion (or relative torsion), τ_r, measures the rate of change of the surface normal around the curve's tangent.

Let the curve be a unit speed curve and let t = u × T so that T, u, t form an orthonormal basis: the Darboux frame. The above quantities are related by:

${\begin{pmatrix}\mathbf {T'} \\\mathbf {t'} \\\mathbf {u'} \end{pmatrix}}={\begin{pmatrix}0&\kappa _{g}&\kappa _{n}\\-\kappa _{g}&0&\tau _{r}\\-\kappa _{n}&-\tau _{r}&0\end{pmatrix}}{\begin{pmatrix}\mathbf {T} \\\mathbf {t} \\\mathbf {u} \end{pmatrix}}$

Principal curvature

Saddle surface with normal planes in directions of principal curvatures

All curves with the same tangent vector will have the same normal curvature, which is the same as the curvature of the curve obtained by intersecting the surface with the plane containing T and u. Taking all possible tangent vectors then the maximum and minimum values of the normal curvature at a point are called the principal curvatures, k₁ and k₂, and the directions of the corresponding tangent vectors are called principal directions.

Two dimensions: Curvature of surfaces

Main article: Differential geometry of surfaces

Gaussian curvature

Main article: Gaussian curvature

In contrast to curves, which do not have intrinsic curvature, but do have extrinsic curvature (they only have a curvature given an embedding), surfaces can have intrinsic curvature, independent of an embedding. The Gaussian curvature, named after Carl Friedrich Gauss, is equal to the product of the principal curvatures, k₁k₂. It has the dimension of 1/length² and is positive for spheres, negative for one-sheet hyperboloids and zero for planes. It determines whether a surface is locally convex (when it is positive) or locally saddle (when it is negative).

This definition of Gaussian curvature is extrinsic in that it uses the surface's embedding in R³, normal vectors, external planes etc. Gaussian curvature is however in fact an intrinsic property of the surface, meaning it does not depend on the particular embedding of the surface; intuitively, this means that ants living on the surface could determine the Gaussian curvature. For example, an ant living on a sphere could measure the sum of the interior angles of a triangle and determine that it was greater than 180 degrees, implying that the space it inhabited had positive curvature. On the other hand, an ant living on a cylinder would not detect any such departure from Euclidean geometry, in particular the ant could not detect that the two surfaces have different mean curvatures (see below) which is a purely extrinsic type of curvature.

Formally, Gaussian curvature only depends on the Riemannian metric of the surface. This is Gauss's celebrated Theorema Egregium, which he found while concerned with geographic surveys and mapmaking.

An intrinsic definition of the Gaussian curvature at a point P is the following: imagine an ant which is tied to P with a short thread of length r. She runs around P while the thread is completely stretched and measures the length C(r) of one complete trip around P. If the surface were flat, she would find C(r) = 2πr. On curved surfaces, the formula for C(r) will be different, and the Gaussian curvature K at the point P can be computed by the Bertrand–Diquet–Puiseux theorem as

$K=\lim _{r\to 0^{+}}3{\frac {2\pi r-C(r)}{\pi r^{3}}}.$

The integral of the Gaussian curvature over the whole surface is closely related to the surface's Euler characteristic; see the Gauss-Bonnet theorem.

The discrete analog of curvature, corresponding to curvature being concentrated at a point and particularly useful for polyhedra, is the (angular) defect; the analog for the Gauss-Bonnet theorem is Descartes' theorem on total angular defect.

Because curvature can be defined without reference to an embedding space, it is not necessary that a surface be embedded in a higher dimensional space in order to be curved. Such an intrinsically curved two-dimensional surface is a simple example of a Riemannian manifold.

Mean curvature

The mean curvature is equal to half the sum of the principal curvatures, (k₁+k₂)/2. It has the dimension of 1/length. Mean curvature is closely related to the first variation of surface area, in particular a minimal surface such as a soap film, has mean curvature zero and a soap bubble has constant mean curvature. Unlike Gauss curvature, the mean curvature is extrinsic and depends on the embedding, for instance, a cylinder and a plane are locally isometric but the mean curvature of a plane is zero while that of a cylinder is nonzero.

Second fundamental form

The intrinsic and extrinsic curvature of a surface can be combined in the second fundamental form. This is a quadratic form in the tangent plane to the surface at a point whose value at a particular tangent vector X to the surface is the normal component of the acceleration of a curve along the surface tangent to X; that is, it is the normal curvature to a curve tangent to X (see above). Symbolically,

$I\!I(X,X)=N\cdot (\nabla _{X}X)$

where N is the unit normal to the surface. For unit tangent vectors X, the second fundamental form assumes the maximum value k₁ and minimum value k₂, which occur in the principal directions u₁ and u₂, respectively. Thus, by the principal axis theorem, the second fundamental form is

$I\!I(X,X)=k_{1}(X\cdot u_{1})^{2}+k_{2}(X\cdot u_{2})^{2}.$

Thus the second fundamental form encodes both the intrinsic and extrinsic curvatures.

A related notion of curvature is the shape operator, which is a linear operator from the tangent plane to itself. When applied to a tangent vector X to the surface, the shape operator is the tangential component of the rate of change of the normal vector when moved along a curve on the surface tangent to X. The principal curvatures are the eigenvalues of the shape operator, and in fact the shape operator and second fundamental form have the same matrix representation with respect to a pair of orthonormal vectors of the tangent plane. The Gauss curvature is thus the determinant of the shape tensor and the mean curvature is half its trace.

Higher dimensions: Curvature of space

Main article: Curvature of Riemannian manifolds

By extension of the former argument, a space of three or more dimensions can be intrinsically curved. The curvature is intrinsic in the sense that it is a property defined at every point in the space, rather than a property defined with respect to a larger space that contains it. In general, a curved space may or may not be conceived as being embedded in a higher-dimensional ambient space; if not then its curvature can only be defined intrinsically.

After the discovery of the intrinsic definition of curvature, which is closely connected with non-Euclidean geometry, many mathematicians and scientists questioned whether ordinary physical space might be curved, although the success of Euclidean geometry up to that time meant that the radius of curvature must be astronomically large. In the theory of general relativity, which describes gravity and cosmology, the idea is slightly generalised to the "curvature of space-time"; in relativity theory space-time is a pseudo-Riemannian manifold. Once a time coordinate is defined, the three-dimensional space corresponding to a particular time is generally a curved Riemannian manifold; but since the time coordinate choice is largely arbitrary, it is the underlying space-time curvature that is physically significant.

Although an arbitrarily curved space is very complex to describe, the curvature of a space which is locally isotropic and homogeneous is described by a single Gaussian curvature, as for a surface; mathematically these are strong conditions, but they correspond to reasonable physical assumptions (all points and all directions are indistinguishable). A positive curvature corresponds to the inverse square radius of curvature; an example is a sphere or hypersphere. An example of negatively curved space is hyperbolic geometry. A space or space-time with zero curvature is called flat. For example, Euclidean space is an example of a flat space, and Minkowski space is an example of a flat space-time. There are other examples of flat geometries in both settings, though. A torus or a cylinder can both be given flat metrics, but differ in their topology. Other topologies are also possible for curved space. See also shape of the universe.

Generalizations

Parallel transporting a vector from A → N → B → A yields a different vector. This failure to return to the initial vector is measured by the holonomy of the surface.

The mathematical notion of curvature is also defined in much more general contexts. Many of these generalizations emphasize different aspects of the curvature as it is understood in lower dimensions.

One such generalization is kinematic. The curvature of a curve can naturally be considered as a kinematic quantity, representing the force felt by a certain observer moving along the curve; analogously, curvature in higher dimensions can be regarded as a kind of tidal force (this is one way of thinking of the sectional curvature). This generalization of curvature depends on how nearby test particles diverge or converge when they are allowed to move freely in the space; see Jacobi field.

Another broad generalization of curvature comes from the study of parallel transport on a surface. For instance, if a vector is moved around a loop on the surface of a sphere keeping parallel throughout the motion, then the final position of the vector may not be the same as the initial position of the vector. This phenomenon is known as holonomy. Various generalizations capture in an abstract form this idea of curvature as a measure of holonomy; see curvature form. A closely related notion of curvature comes from gauge theory in physics, where the curvature represents a field and a vector potential for the field is a quantity that is in general path-dependent: it may change if an observer moves around a loop.

Two more generalizations of curvature are the scalar curvature and Ricci curvature. In a curved surface such as the sphere, the area of a disc on the surface differs from the area of a disc of the same radius in flat space. This difference (in a suitable limit) is measured by the scalar curvature. The difference in area of a sector of the disc is measured by the Ricci curvature. Each of the scalar curvature and Ricci curvature are defined in analogous ways in three and higher dimensions. They are particularly important in relativity theory, where they both appear on the side of Einstein's field equations that represents the geometry of spacetime (the other side of which represents the presence of matter and energy). These generalizations of curvature underlie, for instance, the notion that curvature can be a property of a measure; see curvature of a measure.

Another generalization of curvature relies on the ability to compare a curved space with another space that has constant curvature. Often this is done with triangles in the spaces. The notion of a triangle makes senses in metric spaces, and this gives rise to CAT(k) spaces.

See also

• Curvature form for the appropriate notion of curvature for vector bundles and principal bundles with connection.
• Curvature of a measure for a notion of curvature in measure theory.
• Curvature of Riemannian manifolds for generalizations of Gauss curvature to higher-dimensional Riemannian manifolds.
• Curvature vector and geodesic curvature for appropriate notions of curvature of curves in Riemannian manifolds, of any dimension.
• Curve.
• Degree of curvature.
• Differential geometry of curves for a full treatment of curves embedded in a Euclidean space of arbitrary dimension.
• Dioptre a measurement of curvature used in optics.
• Gauss-Bonnet theorem for an elementary application of curvature.
• Gauss map for more geometric properties of Gauss curvature.
• Hertz's principle of least curvature an expression of the Principle of Least Action.
• Mean curvature at one point on a surface.
• Minimum railway curve radius.
• Radius of curvature.
• Second fundamental form for the extrinsic curvature of hypersurfaces in general.
• Torsion of a curve.

References

• Coolidge, J.L. "The Unsatisfactory Story of Curvature". The American Mathematical Monthly, Vol. 59, No. 6 (Jun. - Jul., 1952), pp. 375–379
• Sokolov, D.D. (2001) [1994], "Curvature", Encyclopedia of Mathematics, EMS Press
• Morris Kline: Calculus: An Intuitive and Physical Approach. Dover 1998, ISBN 978-0-486-40453-0, p. 457-461 (restricted online copy, p. 457, at Google Books)
• A. Albert Klaf: Calculus Refresher. Dover 1956, ISBN 978-0-486-20370-6, p. 151-168 (restricted online copy, p. 151, at Google Books)
• James Casey: Exploring Curvature. Vieweg+Teubner Verlag 1996, ISBN 978-3-528-06475-4

External links

Wikimedia Commons has media related to Graphical illustrations of the curvature of curves.

• Create your own animated illustrations of moving Frenet-Serret frames and curvature (Maple-Worksheet)
• The History of Curvature
• Curvature, Intrinsic and Extrinsic at MathPages