Jump to content

Hazcam

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Etaoin (talk | contribs) at 05:58, 6 August 2012 (add Curiosity). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Hazcam images indicated to NASA engineers that the Opportunity Rover was stuck in a sand dune.

Hazcams (short for Hazard Avoidance Cameras) are photographic cameras mounted on the front and rear of NASA's Spirit, Opportunity and Curiosity rover missions to Mars.

The Hazcams are sensitive to visible light and return black and white images of resolution 1024x1024 pixels. These images are used by the rovers' internal computer to autonomously navigate around hazards. Due to their positioning on both sides of the rovers, simultaneous images taken by either both front or both rear cameras can be used to produce a 3D map of the immediate surroundings. As the cameras are fixed (i.e. can not move independently of the rover), they have a wide field of view (approximately 120° both horizontally and vertically) to allow a large amount of terrain to be visible.

They are considered engineering cameras since they were not designed to be used for scientific experiments. The other set of engineering cameras on the rovers are the Navcams.

The safe landing of the Curiosity Rover was initially confirmed using the vehicle's hazcams.