Electric guitar

Electric guitar

File:Godin LG-Squier Strat.jpg Two types of electric guitar setups
String instrument
Classification	String instrument (Most often plucked or strummed, either by fingers, or with a pick.)
Hornbostel–Sachs classification	321.322 (Composite chordophone)
Playing range
(a standard tuned guitar)

An electric guitar is a guitar that uses a pickup to convert the vibration of its strings into electrical impulses. The most common guitar pickup uses the principle of direct electromagnetic induction. The signal generated by an electric guitar is too weak to drive a loudspeaker, so it is amplified before sending it to a loudspeaker. Since the output of an electric guitar is an electric signal, the signal may easily be altered using electronic circuits to add "color" to the sound. Often the signal is modified using effects such as reverb and distortion.

Invented in 1931, the electric guitar became a necessity as jazz musicians sought to amplify their sound in the big band format. During the 1950s and 1960s, the electric guitar became the most important instrument in pop music. It has evolved into a stringed musical instrument that is capable of a multitude of sounds and styles. It served as a major component in the development of rock and roll and many other genres of music.

History

Various experiments at electrically amplifying the vibrations of a string instrument date back to the early part of the twentieth century. Patents from the 1910s show telephone transmitters adapted and placed inside violins and banjos to amplify the sound. Hobbyists in the 1920s used carbon button microphones attached to the bridge, however these detected vibration from the bridge on top of the instrument, resulting in a weak signal. With numerous people experimenting with electrical instruments in the 1920s and early 1930s, there are many claimants to have been the first to invent an electric guitar.

Electric guitars were originally designed by guitar makers and instrument manufacturers. Guitar innovator Les Paul experimented with microphones attached to guitars. Some of the earliest electric guitars adapted hollow bodied acoustic instruments and used tungsten pickups. The first electrically amplified guitar was designed in 1931 by George Beauchamp, General Manager at National Guitar Corporation with Paul Barth who was Vice President. The maple body prototype for the one piece cast aluminum "Frying Pan" was built by Harry Watson, factory superintendent of National Guitar Corporation. Commercial production began in late summer of 1932 by the Ro-Pat-In Corporation (Electro-Patent-Instrument Company Los Angeles), a partnership of Beauchamp, Adolph Rickenbacker (originally Rickenbacher), and Paul Barth. By 1934 the company was renamed Rickenbacker Electro Stringed Instrument Company.

The need for the amplified guitar became apparent during the big band era as orchestras increased in size, particularly when guitars had to compete with large brass sections. The first electric guitars used in jazz were hollow archtop acoustic guitar bodies with electromagnetic transducers. By 1932 an electrically amplified guitar was commercially available. Early electric guitar manufacturers include: Rickenbacker (first called Ro-Pat-In) in 1932, Dobro in 1933, National, AudioVox and Volu-tone in 1934,Vega, Epiphone (Electrophone and Electar), and Gibson in 1935 and many others by 1936.

The solid body electric guitar is made of solid wood, without functionally resonating air spaces. Rickenbacker offered a cast aluminum electric steel guitar, nicknamed "The Frying Pan" or "The Pancake Guitar", developed in 1931 with production beginning in the summer of 1932.

The first solid body "Spanish" standard guitar was offered by Vivi-Tone no later than 1934. An example of this model, featuring a guitar-shaped body of a single sheet of plywood affixed to a wood frame. Another early, substantially solid Spanish electric guitar, called Electro Spanish, was marketed by the "Rickenbacker" guitar company in 1935 and made of Bakelite. By 1936, the Slingerland company introduced a wooden solid body electric model.

The earliest documented performance with an electrically amplified guitar was in 1932, by Gage Brewer. The Wichita, Kansas-based musician had an Electric Hawaiian A-25 (frypan, lap-steel) and a standard Electric Spanish from George Beauchamp of Los Angeles, California. Brewer publicized his new instruments in an article in the Wichita Beacon of October 2, 1932 and through performances that month.

The first recordings using the electric guitar were by Hawaiian style players, in 1933. Bob Dunn of Milton Brown's Musical Brownies introduced the electric Hawaiian guitar to Western Swing with his January 1935 Decca recordings, departing almost entirely from Hawaiian musical influence and heading towards Jazz and Blues. Alvino Rey was an artist who took this instrument to a wide audience in a large orchestral setting and later developed the pedal steel guitar for Gibson. An early proponent of the electric Spanish guitar was jazz guitarist George Barnes who used the instrument in two songs recorded in Chicago on March 1, 1938, "Sweetheart Land" and "It's a Low-Down Dirty Shame". Some incorrectly attribute the first recording to Eddie Durham, but his recording with the Kansas City Five was 15 days later. Durham introduced the instrument to a young Charlie Christian, who made the instrument famous in his brief life and would be a major influence on jazz guitarists for decades thereafter.

Gibson's first production electric guitar, marketed in 1936, was the ES-150 model ("ES" for "Electric Spanish"; and "150" reflecting the $150 price of the instrument, along with a matching amplifier). The ES-150 guitar featured a single-coil, hexagonally shaped "bar" pickup, which was designed by Walt Fuller. It became known as the "Charlie Christian" pickup (named for the great jazz guitarist who was among the first to perform with the ES-150 guitar). The ES-150 achieved some popularity, but suffered from unequal loudness across the six strings.

Early proponents of the electric guitar on record include: Jack Miller (Orville Knapp Orchestra), Alvino Rey (Phil Spitalney Orchestra), Les Paul (Fred Waring Orchestra), Danny Stewart (Andy Iona Orchestra), George Barnes (under many aliases), Lonnie Johnson, Floyd Smith, Big Bill Broonzy, T-Bone Walker, George Van Eps, Charlie Christian (Benny Goodman Orchestra) Tampa Red, Memphis Minnie, and Arthur Crudup.

A functionally solid body electric guitar was designed and built by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid body "Les Paul" model sold by Gibson. However, the feedback problem associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.

In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.

Construction

Legend:
1. Headstock:
1.1 machine heads
1.2 truss rod cover
1.3 string guide
1.4 nut
2. Neck:
2.1 fretboard
2.2 inlay fret markers
2.3 frets
2.4 neck joint
g 3. Body
3.1 "neck" pickup
3.2 "bridge" pickup
3.3 saddles
3.4 bridge
3.5 fine tuners and tailpiece assembly
3.6 tremolo arm (whammy bar)
3.7 pickup selector switch
3.8 volume and tone control knobs
3.9 output connector (output jack)(TS)
3.10 strap buttons
4. Strings:
4.1 bass strings
4.2 treble strings

While in terms of the materials used for the body, guitar construction has many variations such as the shape of the body, and the configuration of the neck, bridge, and pickups, there are features which are found in most guitars. The photo below shows the different parts of an electric guitar. The headstock (1) contains the metal machine heads, which are used for tuning; the nut (1.4), a thin fret-like strip of metal, plastic, graphite or bone which the strings pass over as they first go onto the fingerboard; the machine heads (1.1), which are worm gears which the player turns to change the string tension and thus adjust the tuning; the frets (2.3), which are thin metal strips which stop the string at the correct pitch when a string is pressed down against the fingerboard; the truss rod (1.2), a metal cylinder used for adjusting the tension on the neck (not found on all instruments); decorative inlay (2.2), a feature used to keep place of where the notes of the guitar are.

The neck and the fretboard (2.1) extend from the body; at the neck joint (2.4), the neck is either glued or bolted to the body; the body (3) of this instrument is typically made of wood with a hard, polymerized finish; pickups, a type of transducer (3.1, 3.2); the control knobs (3.8) for the volume and tone potentiometers; a fixed bridge (3.4), on some guitars a spring-loaded hinged bridge called a "tremolo system" is used instead, which allows players to "bend" notes or chords up or down in pitch or perform a vibrato embellishment; and a plastic pickguard, a feature not found on all guitars, which is used to protect the body from scratches or cover the control cavity which holds most of the electric guitar's wiring.

The degree to which the sonic character of the amplified solid body guitar can be determined by the woods used in the body (3) is a disputed subject. Many find that it is highly significant, while many others believe that the difference between woods is relatively subtle. In acoustic and archtop guitars there is clearly a more pronounced sonic definition caused by the type of wood used.

For solid body electric guitars typical woods include alder (brighter, but well rounded), swamp ash (similar to alder, but with more pronounced highs and lows), mahogany (dark, bassy, warm), poplar (similar to alder) and basswood (very neutral). Maple, a very bright tonewood, is also a popular body wood, but is very heavy. For this reason it is often placed as a 'cap' on a guitar made of primarily of another wood. Cheaper guitars are often made of cheaper woods, such as plywood, pine or agathis, not true hardwoods, which can affect the durability and tone of the guitar. Although most guitars are made from wood, any material may be used in the construction of a guitar. Materials such as plastic, metal, or cardboard are examples of unusual but possible materials that affect the overall sound of the guitar.

The guitar output jack is typically designed for monaural function. On many guitars with active electronics a stereo jack may be installed but is wired for mono sound. The extra "ring" lug on the jack is then used to break the ground connection to the on-board battery thus preserving battery life when the guitar is unplugged. These guitars require use of a mono plug to close the internal switch and connect the battery to ground. Standard guitar cables are outfitted with a high impedance 1/4 inch (6.35 mm) mono plug. These utilize a tip and sleeve configuration referred to as a TS phone connector.

A few guitars are actually set up for stereo, for example Rickenbacker guitars equipped with Rick-O-Sound. There are a variety of ways the "stereo" effect may be implemented. Commonly, but not exclusively, stereo guitars route the neck and bridge pickups to separate output buses on the guitar. A stereo cable can then route each pickup to its own signal chain or amplifier. For these applications, the most popular connector is a high impedance 1/4 inch plug with a tip, ring and sleeve configuration also known as a TRS phone connector. Some studio instruments, notably certain models of Gibson Les Paul, incorporate a low impedance 3-pin XLR connector for balanced audio. Many exotic arrangements and connectors are employed to support features such as midi and hexaphonic pickups.

Bridge and tailpiece systems

The bridge and tailpiece, while serving separate purposes, work closely together as design elements to affect the playing style of the guitarist and the sound of the instrument. There are four basic types of bridge/tailpiece systems found on electric guitars. Within these four types there are many variants.

Hard-tail

A hard-tail guitar bridge incorporates hardware that anchors the strings at or directly behind the bridge and is fastened securely to the top of the instrument. These may be found on carved top guitars such as the Gibson Les Paul, Paul Reed Smith models as well as on slab body guitars like the Music Man Albert Lee, and Fender guitars that are not vibrato arm equipped.

Floating tailpiece

A floating tailpiece (similar to a violin's) is sometimes called a trapeze tailpiece and is fastened to the body at the base of the guitar. These are often seen on Rickenbackers, Gretschs, Epiphones, a wide variety of archtop guitars, particularly jazz-boxes and the 1952 Gibson Les Paul.

Vibrato arms

Pictured is a tremolo arm or vibrato tailpiece style bridge/tailpiece system often called a whammy bar or trem. It uses a lever ("vibrato arm") attached to the bridge which can slacken or tighten the strings temporarily, changing the pitch, thereby creating a vibrato or a portamento effect. Early vibrato systems tended to be unreliable and cause the guitar to go out of tune quite easily. They also had a limited range. Later Fender designs were better, but Fender held the patent on these, so other companies used older designs for many years.

Detail of a Squier-made Fender Stratocaster. Note the vibrato arm, the 3 single-coil pickups, the volume and tone knobs.

With the expiration of the Fender patent on the Stratocaster-style vibrato, various improvements on this type of internal, multi-spring vibrato system are now available. Floyd Rose introduced one of the first improvements on the vibrato system in many years when in the late 1970s he began to experiment with "locking" nuts and bridges which work to prevent the guitar from losing tuning even under the most heavy whammy bar acrobatics.

String-through body

Tune-o-matic with "strings through the body" construction (without stopbar)

The fourth type of system employs string-through body anchoring. The strings pass over the bridge saddles and then through holes drilled through the top of the guitar body to the back. The strings are typically anchored in place at the back of the guitar by metal ferrules. It is widely believed that this design improves a guitar's sustain and timbre. Examples of string-through bodies on guitars include the Fender Telecaster Thinline, Telecaster Deluxe, B.C.Rich IT Warlock and Mockingbird, and the Schecter Omen 6 and 7 Series.

Pickups

Main article: Pickup (music technology)

Compared to an acoustic guitar, which has a hollow body, electric guitars make comparatively little audible sound simply by having their strings plucked, and so electric guitars are normally plugged into a guitar amplifier, which makes the sound louder. When an electric guitar is strummed, the movement of the strings generates (i.e., "induces") a very small electric current in the magnetic pickups, which are magnets wrapped with coils of very fine wire. That current is then sent through a cable to a guitar amplifier. The current induced is proportional to such factors as the density of the string or the amount of movement over these pickups. That vibration is, in turn, affected by several factors, such as the composition and shape of the body.

A close-up of the pickups on a Fender Squier "Fat Strat" guitar; on the left is a "humbucker" pickup and on the right are two single-coil pickups.

Because in most cases it is desirable to isolate coil-wound pickups from unintended sounds produced through internal vibration of loose coil windings, a guitar's magnetic pickups will normally be embedded or "potted" in wax or epoxy to prevent the pickup from having a microphonic effect.

Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient and usually unwanted electromagnetic interference or EMI. The resulting noise, the so-called "hum", is particularly strong with single-coil pickups, and aggravated by the fact that many vintage guitars are incorrectly shielded against electromagnetic interference. The most frequent cause is the strong 50 or 60 Hz component that is inherent in the generation of electricity in power transmission systems. Since nearly all amplifiers and audio equipment associated with electric guitars rely on this power, it is a continuing technical challenge to reduce or eliminate the introduction of unwanted hum.

Double-coil or "humbucker" pickups were invented as a way to reduce or counter the unwanted ambient hum sounds (known as 60 cycle hum). Humbuckers have two coils of opposite magnetic and electric polarity. This means that electromagnetic noise hitting both coils should cancel itself out. The two coils are wired in phase, so the signal picked up by each coil is added together. This high combined inductance of the two coils leads to the richer, "fatter" tone associated with humbucking pickups.

Piezoelectric pickups use a "sandwich" of quartz crystal or other piezoelectric material typically placed beneath the string saddles or nut. These devices respond to pressure changes from all vibration at these specific points.

Optical pickups are a type of pickup which sense string and body vibrations using infrared LED light. These pickups are not sensitive to EMI.

Some "hybrid" electric guitars are equipped with additional microphone, piezoelectric, optical, or other types of transducers in an attempt to approximate an "acoustic" instrument tone and broaden the sonic palette of the instrument.

Guitar necks

Electric guitar necks can vary according to composition as well as shape. The primary metric used to describe a guitar neck is the scale length, which is the overall length of the strings from the nut to the bridge. A typical Fender guitar uses a 25.5 inch scale length, while Gibson uses a 24.75 inch scale length in their Les Paul. While the scale length of the Les Paul has often claimed to be 24.75 inches, it has varied through the years by as much as a half inch. The frets are placed proportionally according to the scale length; thus, the shorter the scale length, the closer the spacing of the frets. Opinions vary regarding the effect of scale length on tone and feel. Generally, it is felt that longer scale length contributes to greater amplitude. Reports of playing feel are greatly complicated by the many factors involved in this perception. String gauge and design, neck construction and relief, guitar setup, playing style and other factors contribute to the subjective impression of playability or feel.

Necks are described as bolt-on, set-in, or neck-through depending on how they are attached to the body. Set-in necks are glued to the body in the factory, and are said to have a warmer tone and greater sustain; this is the most traditional type of joint. Bolt-on necks were pioneered by Leo Fender to facilitate easy adjustment and replacement of the guitar neck. Neck-through instruments extend the neck itself to form the center of the guitar body, and are known for long sustain and for being particularly sturdy. While a set neck can be carefully unglued by a skilled luthier, and a bolt-on neck can simply be unscrewed, a neck-through design is difficult or even impossible to repair, depending on the damage. Historically, the bolt-on style has been more popular for ease of installation and adjustment; since bolt-on necks can be easily removed, there is an after-market in replacement bolt-on necks from companies such as Warmoth and Mighty Mite. Some instruments, notably most Gibson models, have continued to use set/glued necks. Neck-through bodies are somewhat more common in bass guitars.

The materials used in the manufacture of the neck, selected for dimensional stability and rigidity, are alleged to influence the tone of the instrument. Hardwoods are very much preferred, with maple, mahogany, and ash topping the list. The neck and fingerboard can be made from different materials, such as a maple neck with a rosewood fingerboard. In the 1970s, exotic man-made materials such as aircraft grade aluminum, carbon fiber, and ebonol began to be used by designers John Veleno, Travis Bean, Geoff Gould, and Alembic. Along with the engineering advantages, some have felt that in relation to the rising cost of rare 'tonewoods' man-made materials may be economically viable. However, artificial materials have not replaced the popularity of wood in production instruments, although they are sometimes used in conjunction with traditional materials. Vigier guitars are one example. Vigier uses a wooden neck and reinforces it by embedding a light, carbon fiber rod to replace the heavier steel bar or adjustable steel truss rod typically employed. After-market necks made entirely from carbon fiber can be retrofitted to existing bolt-on instruments. Few, if any, extensive formal investigations have been widely published to confirm or refute claims over the effects of different woods or materials on an electric guitar's sound.

Several neck shapes are used on guitars, including shapes known as C necks, U necks, and V necks. These refer to the cross-sectional shape of the neck (especially near the nut). There are also several sizes of fret wire available, with traditional players often preferring thin frets, and metal shredders liking thick frets. Thin frets are considered better for playing chords, while thick frets allow lead guitarists to bend notes with less effort. An electric guitar with a neck which folds back called the "Foldaxe" was designed and built for Chet Atkins by Roger C. Field. Steinberger guitars developed a line of exotic, carbon fiber instruments without headstocks, with tuning done on the bridge instead.

Just as neck shapes vary so do fingerboards. Fingerboards are the surface of the neck into which frets are set. This surface has a radius in cross section optimized to accommodate finger movement for different playing techniques. They typically range from nearly flat, a very large radius, to radically arched, a small radius. An example of a small radius, the vintage Fender Telecaster typically has approximately a 7 inch radius fingerboard. Some manufacturers have experimented with fret design, fret layout, number of frets, and modification of the fingerboard surface for a variety of reasons. Some innovations were intended to improve playability by ergonomic means such as Warmoth Guitars compound radius fingerboard. Scalloped fingerboards added enhanced microtonality during fast legato runs. Fanned frets permit each string to have an optimal playing tension and enhanced musicality. Some guitars have no frets whatsoever and others, like the Gittler guitar, have no neck in the traditional sense.

Sound and effects

While an acoustic guitar's sound is largely dependent on the vibration of the guitar's body and the air within it, the sound of an electric guitar is largely dependent on a magnetically induced electrical signal, generated by the vibration of metal strings near sensitive pickups. The signal is then "shaped" on its path to the amplifier by using a range of effect devices or circuits that modify the tone and characteristics of the signal. The amplifiers and speakers used also add (intentional) coloration to the final sound.

Built-in sound shaping

Electric guitars usually have up to three, but sometimes four, magnetic pickups. Identical pickups will have different tones depending on how near they are to the neck or bridge, with bridge pickups having a bright or trebly timbre, and neck pickups being more warm or bassy. The type of pickup also affects tone, with dual-coil pickups sounding warmer, thicker, perhaps even muddy, and single coil pickups sounding clear, bright, perhaps even biting. Guitars do not have to be fitted with a uniform type of pickup: a common mixture is the "fat strat" arrangement of one dual-coil at the bridge position, with single coils in the middle and neck positions.

A piezoelectric pickup is used in some electric guitars in addition to electromagnetic pickups. It is used to better achieve a near acoustic sound from the strings. The piezo-pickup is run through a built in equalizer (EQ) to improve the acoustic similitude. A blend knob controls the mix between electromagnetic and piezoelectric sounds.

Where there is more than one pickup, a pickup selector switch is fitted. These often allow the outputs of two or more pickups to be combined, so that two-pickup guitars have three-way switches, and three-pickup guitars have five-way switches. Further circuitry is sometimes provided to combine the pickups in different ways. For instance, phase switching places one pickup out of phase with the other(s), leading to a "honky", "nasal", or "funky" sound. Individual pickups can also have their timbre altered by switches, typically coil tap switch, which effectively short-circuits some of a dual-coil pickup's windings, giving a tone like a single coil pickup.

The final stages of on-board sound-shaping circuitry are the volume control (potentiometer) and tone control (which "rolls off" the treble frequencies). Where there are individual volume controls for different pickups, and where pickup signals can be combined, they would affect the timbre of the final sound by adjusting the balance between pickups from a straight 50:50.

The strings fitted to the guitar also have an influence on tone. Rock musicians often prefer the lightest gauge of roundwound string, which are easier to bend, while jazz musicians go for heavier, flatwound strings with a rich, dark sound. Steel, Nickel, and Cobalt are common string materials, and each gives a slightly different tone color.

Recent guitar designs may incorporate much more complex circuitry than described above: see Digital and synthesizer guitars, below.

Classic amplifier sounds

In the 1960s, some guitarists began exploring a wider range of tonal effects by distorting the sound of the instrument. To do this, they used overdrive — increasing the gain, of the preamplifier beyond the level at which the signal could be faithfully reproduced, resulting in a "fuzzy" sound. This effect is called "clipping" by sound engineers, because when viewed with an oscilloscope, the wave forms of a distorted signal appear to have had their peaks "clipped off", approximating a square wave. This was not actually a new development in the instrument, but rather a shift of aesthetics, the sound having not been recognized as desirable previously.

Distortion achieved by overdrive necessarily involves high volumes and is therefore often combined with audio feedback.

After distortion became popular, amplifier manufacturers included various provisions for it, making amps easier to overdrive, and providing separate "dirty" and "clean" channels so that distortion could easily be switched in and out. The distortion characteristics of vacuum tube amplifiers are particularly sought-after, and various attempts have been made to emulate them without the disadvantages (fragility, low power, expense) of actual tubes.

Guitar amplifiers have long included at least a few effects, often tone controls and a spring reverb unit. The use of offboard effects is assisted by the provision of effect loops, an arrangement that allows effects to be taken out of circuit when not required.

Effects units

Main article: Effects unit

A Boss distortion pedal in use.

In the 1960s, the tonal palette of the electric guitar was further modified by introducing an Effects unit in its signal path. Effects units come in several formats, the most common of which are the stomp-box and the rack-mount unit. A "stomp box" (or "pedal") is a small metal or plastic box containing the circuitry which is placed on the floor in front of the musician and connected in line with the patch cord connected to the instrument. The box is typically controlled by one or more foot-pedal on-off switches and it typically contains only one or two effects. "Guitar pedalboards" are used by musicians who use multiple stomp-boxes; these may be a DIY project made with plywood or a commercial pedalboard.

A rack-mount effects unit may contain the identical electronic circuit, but is mounted in a standard 19" equipment rack. Usually, however, rack-mount effects units contain several types of effects. They are typically controlled by knobs or switches on the front panel, and often by a MIDI digital control interface.

Typical effects include:-

• Effects such as stereo chorus, phasers and flangers which shift the pitch of the signal by a small and varying amount, creating swirling, shimmering and whooshing noises.
• Effects such as octavers, which displace pitch by an exact musical interval.
• Distortion, such as transistor-style fuzz, or effects incorporating or emulating vacuum tube distortion.
• Filters such as wah-wah
• Envelope shapers, such as compression/sustain or volume/swell.
• Time-shift effects such as delay and reverb.

Modern amplifier techniques

In the 1970s, as effects pedals proliferated, their sounds were combined with tube amp distortion at lower, more controlled volumes by using power attenuators such as Tom Scholz' Power Soak as well as re-amplified dummy loads such as Eddie Van Halen's use of a variac, power resistor, post-power-tube effects, and a final solid-state amp driving the guitar speakers. A variac is one approach to power-supply based power attenuation, to make the sound of power-tube distortion more practically available.

Recent amplifiers may include digital technology similar to modern effects pedals, including the ability to model or emulate a variety of classic amps.

Digital and software-based effects

The Zoom 505 multi-effect pedal.

A multi-effects device (also called a "multi-FX" device) is a single electronics effects pedal or rackmount device that contains many electronic effects. In the late 1990s and throughout the 2000s, multi-FX manufacturers such as Zoom and Korg produced devices that were increasingly feature-laden. Multi-FX devices allow several of the effects to be used together, and most devices allow users to set "preset" combinations of effects including distortion, chorus, reverb, compression, and so on. This allows musicians to have quick on-stage access to different effects combinations. Some multi-FX pedals contain modelled versions of well-known effects pedals or amplifiers.

The Boss GT-8 is a higher-end multi-effect processing pedal; note the preset switches and patch bank footswitches and built-in expression pedal.

Multi-effects devices have garnered a large share of the effects device market because they offer the user such a large variety of effects in a single package. A low-priced multi-effects pedal may provide 20 or more effects for the price of a regular single-effect pedal. More expensive multi-effect pedals may include 40 or more effects, amplifier modelling, and the ability to combine effects and/or modelled amp sounds in different combinations, as if the user was using multiple guitar amps. More expensive multi-effects pedals may also include more input and output jacks (e.g., an auxiliary input or a "dry" output), MIDI inputs and outputs, and an expression pedal, which can control volume or modify effect parameters (e.g., the rate of the simulated rotary speaker effect).

By the 1980s and 1990s, software effects became capable of replicating the analog effects used in the past. These new digital effects attempted to model the sound produced by analog effects and tube amps, to varying degrees of quality. There are many free guitar effects computer programs for computers that can be downloaded via the Internet. Now, computers with sound cards can be used as digital guitar effects processors. Although digital and software effects offer many advantages, many guitarists still use analog effects.

Synthesizer and digital guitars

In 2002, Gibson announced the first digital guitar, which performs analog-to-digital conversion internally. The resulting digital signal is delivered over a standard Ethernet cable, eliminating cable-induced line noise. The guitar also provides independent signal processing for each individual string. In 2003, modelling amplifier maker Line 6 introduced the Variax guitar. It differs in some fundamental ways from conventional solid-body electrics. It has on-board electronics capable of modelling the sound of a variety of unique guitars and some other stringed instruments. At one time, some models featured piezoelectric pickups instead of the conventional electromagnetic pickups.

Playing techniques

A prepared guitar

The sound of a guitar is not only adapted by electronic sound effects, but also heavily by all kinds of new techniques developed or becoming possible in combination with the electric amplification. This is called extended technique.

Extended techniques include:-

• String bending. This is not quite unique to the electric instrument, but is greatly facilitated by the light strings typically used on solid body guitars.
• Neck bending, by holding the upper arm on the guitar body and bending the neck either to the front or pulling it back. This is used as a substitute for a tremolo bar, although not as effective and too powerful of force use could snap the guitar neck.
• The use of the whammy bar or "tremolo" arm, including the extreme technique of dive bombing.
• Tapping, in which both hands are applied to the fretboard.
• Pinch harmonics, sometimes called "squealies". This technique involves adding the edge of the thumb or the tip of the index finger on the picking hand to the regular picking action, resulting in a high pitched sound.
• Volume swells, in which the volume knob is repeatedly rolled to create a violin-like sound. Note that the same result can also be accomplished through the use of an external swell pedal, although the knob technique can enhance showmanship and conveniently eliminate the need for another pedal.
• Use of audio feedback to enhance sustain and change timbre.
• Substitution of another device for the plectrum, for instance the cello bow (as famously used by Jimmy Page) and the e-bow, (a device using electromagnetic feedback to vibrate strings without direct contact). Like feedback, these techniques increase sustain, bring out harmonics and change the acoustic envelope.
• Sustainers built into the guitar itself.
• Use of slide or bottlenecks.
• Sometimes guitars are even adapted with extra modifications to alter the sound, such as Prepared guitar and 3rd bridge.

Other techniques such as axial finger vibrato, pull-offs, hammer-ons, palm muting, harmonics and altered tunings are also used on the classical and acoustic guitar. Shred guitar is a genre involving a number of extended techniques.

Types

Paul Reed Smith Standard 22

Solid body

Solid body electric guitars have no vibrating soundboard to amplify string vibration as is the case with acoustic guitars. Solid body instruments depend on electric pickups and an amplifier (or amp) and speaker. The solid body ensures that the amplified sound will reproduce the string vibration alone, thus avoiding the wolf tones and unwanted feedback associated with amplified acoustic guitars of the period. These guitars are generally made up of hardwood covered with a hard polymer finish, often polyester or lacquer. In large production facilities, the wood is stored for 3 to 6 months in a wood-drying kiln before being cut to shape. Premium custom built guitars are frequently made with much older, hand selected wood.

One of the first solid body guitars was invented by Les Paul. Gibson did not present their 'Les Paul' guitar prototypes to the public, as they did not believe it would catch on. The first mass-produced solid-body guitar was Fender's Broadcaster (later to become the 'Telecaster') first made in 1948, five years after Les Paul made his prototype. The Gibson Les Paul appeared soon after to compete with the Broadcaster. Another notable solid-body design is the Fender Stratocaster, which was introduced in 1954 and became extremely popular among musicians in the 1960s and 1970s for its wide tonal capabilities and more comfortable ergonomics than other models.

Chambered bodies

Some solid-bodied guitars, such as the Gibson Les Paul Supreme, the PRS Singlecut, or the Fender Telecaster Thinline among others, are built with hollows in the body. These hollows are designed specifically not to interfere with the critical bridge and string anchor point on the solid body. In the case of Gibson and PRS, these are called "chambered" bodies. The motivation for this may be to reduce weight, to achieve a semi-acoustic tone (see below) or both.

Semi-acoustic

Main article: Semi-acoustic guitar

An Epiphone brand semi-acoustic hollow-body guitar.

These guitars have a hollow body (similar in depth to a solid-body guitar) and electronic pickups mounted on the body. They work in a similar way to solid body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Whereas chambered guitars are made, like solid-body guitars, from a single block of wood, semi-acoustic and full-hollowbody guitars bodies are made from thin sheets of wood. They do not provide enough acoustic volume to for live performance, but can be used "unplugged" for quiet practice. Semi-acoustics are noted for being able to provide a sweet, plaintive, or funky tone. They are used in many genres, including blues, funk, sixties pop, and indie rock. They generally have cello-style F-shaped sound holes. These can be blocked off to prevent feedback, as in B. B. King's famous Lucille. Feedback can also be reduced by making them with a solid block in the middle of the soundbox. Advocates of semi-hollow-body guitars argue that they have greater resonance and sustain than true solid-body guitars, as a solid wood body.

Full hollowbody guitars

Main article: Archtop guitar

Full hollowbody guitars have large, deep bodies made of glued-together sheets or "plates" of wood, and are often capable of being played at the same volume as an acoustic guitar, and therefore of being used unplugged at intimate gigs. They qualify as electric guitars inasmuch as they have fitted pickups. Historically, archtop guitars with retrofitted pickups were among the very earliest electric guitars. The instrument originated during the Jazz age of the 1920s and 1930s, and are still considered the classic jazz guitar (nicknamed "jazzbox"). Like semi-acoustic guitars, they often have f-shaped sound holes.

Having humbucker pickups (sometimes just a neck pickup) and usually strung heavlly, jazzboxes are noted for their warm, rich tone. A variation with single-coil pickups, and sometimes a Bigsby tremelo, has long been popular in country and rockabilly; these have a distinctly more "twangy", biting, tone than the classic jazzbox. The term "archtop" indicates a method of construction subtly different from the typical acoustic (or "folk" or "western" or "steel string" guitar): the top starts of as a moderately thick (1 inch or 2–3 cm) piece of wood, which is then carved out into a thin (0.1in, 2-3mm) domed shape, whereas conventional acoustic guitars have a thin, flat top.

Electric acoustic

Main article: Electric acoustic guitar

Some steel-string acoustic guitars are fitted with pickups purely as an alternative to using a separate microphone. They may also be fitted with a piezoelectric pickup under the bridge, attached to the bridge mounting plate, or with a low mass microphone (usually a condenser mic) inside the body of the guitar that will convert the vibrations in the body into electronic signals, or even combinations of these types of pickups, with an integral mixer/preamp/graphic equalizer. These are called electric acoustic guitars, and are regarded as acoustic guitars rather than electric guitars because the pickups do not produce a signal directly from the vibration of the strings, but rather from the vibration of the guitar top or body.

These should not be confused with semi-acoustic guitars, which have pickups of the type found on solid body electric guitars, or solid-bodied hybrid guitars with piezoelectric pickups.

String, bridge, and neck variants

One-string

Although rare, the one-string guitar is sometimes heard, particularly in Delta blues, where improvised folk instruments were popular in the 1930s and 1940s. Eddie "One String" Jones had some regional success with a Mississippi blues musician Lonnie Pitchford played a similar, homemade instrument. In a more contemporary style, Little Willie Joe, the inventor of the Unitar, had a rhythm and blues instrumental hit in the 1950s with "Twitchy", recorded with the Rene Hall Orchestra.

Four-string

The best-known proponent of the four-string guitar, often called the tenor guitar was Tiny Grimes, who played on 52nd Street with the beboppers and played a major role in the Prestige Blues Swingers. Grimes' guitar omitted the bottom two strings. Deron Miller of CKY only uses four strings, but plays a six string guitar with the two highest strings removed. Many banjo players use this tuning: DGBE, mostly in Dixieland. Guitar players find this an easier transition than learning plectrum or tenor tuning.

Seven-string

Main article: Seven-string guitar

Most Seven-string guitars add a low "B" string below the low "E". Both electric and classical guitars exist designed for this tuning. A high "A" string above the high "E" instead of the low "B" is sometimes used. Another less common seven-string arrangement is a second G string situated beside the standard G string and tuned an octave higher, in the same manner as a twelve-stringed guitar (see below). Jazz guitarists using a seven-string include veteran jazz guitarists George Van Eps, Lenny Breau, Bucky Pizzarelli and his son John Pizzarelli.

Seven-string electric guitars were popularized among rock players in the 1980s by Steve Vai. Along with the Japanese guitar company Ibanez, Vai created the Universe series seven string guitars in the 1980s, with a double locking tremolo system for a seven string guitar. These models were based on Vai's six string signature series, the Ibanez Jem. Seven-string guitars experienced a resurgence in popularity in the 2000s, championed by Limp Bizkit, Slayer, KoRn, Fear Factory, Strapping Young Lad, Nevermore, Muse and other hard rock/metal bands. Metal musicians often prefer the seven-string guitar for its extended lower range. The seven-string guitar has also played an essential role in progressive metal rock, and is commonly used in bands such as Dream Theater, Pain of Salvation and by experimental guitarists such as Ben Levin.

Eight and nine-string

Main article: Eight-string guitar

Eight-string electric guitars are rare, but not unused. One is played by Charlie Hunter, which was manufactured by Novax Guitars, the largest manufacturer of 8- to 14-strings is Warr Guitars. Their models are also used by Trey Gunn (ex King Crimson) who has his own signature line from the company. Similarly, Mårten Hagström and Fredrik Thordendal of Meshuggah used 8-string guitars made by Nevborn Guitars and now guitars by Ibanez. Munky of the nu metal band KoRn is also known to use seven-string Ibanez guitars and it is rumored that he is planning to release a K8 eight-string guitar similar to his K7 seven-string guitar. Another Ibanez player is Tosin Abasi, lead guitarist of the progressive metal band Animals as Leaders, who uses an Ibanez RG2228 to mix bright chords with very heavy low riffs on the 7 and 8th strings. Stephen Carpenter of Deftones also switched from 7 to 8 string in 2008 and released his signature STEF B-8 with ESP Guitars. In 2008, Ibanez released the Ibanez RG2228-GK which is the first mass produced eight-string guitar. Jethro Tull's first album uses a nine-string guitar on one track. Minarik Guitars manufactures the "Inferno V" 9 stringed guitar that has the top three strings doubled up with strings that are an octave higher, like 12 stringed guitars. Bill Kelliher, guitarist for the heavy metal group Mastodon, worked with First Act on a custom mass-produced nine-string guitar.

Ten-string

Main article: Ten-string guitar

B.C.Rich manufacture a ten-string six-course electric guitar known as the Bich, whose radical shape was specifically designed to allow the machine heads for the four secondary strings to be positioned on the body, avoiding the head-heaviness of many electric twelve-string guitars. However many players bought it for the body shape or electrics and simply removed the extra strings. The company recognized this and released six-string models of the Bich, but ten-string models also remain in production.

In October 2008, a ten-string electric jazz guitar by Mike Shishkov was demonstrated at the 3rd International Ten String Guitar Festival. This instrument was based on the ten-string extended-range classical guitar.

Twelve-string

Main article: Twelve-string guitar

Twelve string electric guitars feature six pairs of strings, usually with each pair tuned to the same note. The extra E, A, D, and G strings add a note one octave above, and the extra B and E strings are in unison. The pairs of strings are played together as one, so the technique and tuning are the same as a conventional guitar, although creating a much fuller tone. They are used almost solely to play harmony and rhythm. They are relatively common in folk rock music. Lead Belly is the folk artist most identified with the twelve-string guitar, usually acoustic with a pickup.

George Harrison of The Beatles and Roger McGuinn of The Byrds brought the electric twelve-string to notability in rock and roll. During the Beatles' first trip to the US, in February 1964, Harrison received a new "360/12" model guitar from the Rickenbacker company, a 12-string electric made to look onstage like a 6-string. He began using the 360 in the studio on Lennon's "You Can't Do That" and other songs. Roger McGuinn began using electric 12-string guitars to create the jangly sound of The Byrds. Another notable guitarist to utilize electric 12-string guitars is Jimmy Page, the guitarist with hard rock-heavy metal and rock group Led Zeppelin.

3rd bridge

Main article: 3rd bridge

The 3rd bridge guitar is an electric prepared guitar with an additional 3rd bridge. This can be a normal guitar with for instance a screwdriver placed under the strings, but can also be a custom made instrument. Lee Ranaldo of Sonic Youth plays with a 3rd bridge.

Double neck guitar

Main article: Double neck guitar

A white Gibson EDS-1275

Double neck (or, less commonly, "twin-neck") guitars enable guitarists to play guitar and bass guitar or, more commonly, a six-string and twelve-string. In the mid-1960s, one of the first players to use this type of guitar was Paul Revere & the Raiders' guitarist Drake Levin. Another early user was John McLaughlin, but the double-neck guitar was popularized by Jimmy Page, who used a custom-made Gibson EDS-1275 to perform "Stairway to Heaven" and "The Song Remains the Same", although "Stairway to Heaven" was actually recorded using a Fender Telecaster and a Fender XII electric twelve string. Mike Rutherford of Genesis and Mike + The Mechanics is also famous for his use of a double-neck guitar during live shows. Don Felder of the Eagles also used the Gibson EDS-1275 during the Hotel California tour. Muse guitarist and vocalist Matthew Bellamy uses a silver Manson Double Neck on his bands' The Resistance Tour.

Uses

Popular music

Popular music and rock groups often use the electric guitar in two roles: as a rhythm guitar which provides the chord sequence or "progression" and sets out the "beat" (as part of a rhythm section), and a lead guitar, which is used to perform melody lines, melodic instrumental fill passages, and guitar solos. In some rock or metal bands with two guitarists, the two performers may perform as a guitar tandem, and trade off the lead guitar and rhythm guitar roles. In bands with a single guitarist, the guitarist may switch between these two roles, playing chords to accompany the singer's lyrics, and then playing a guitar solo in the middle of the song.

In the most commercially available and consumed pop and rock genres, electric guitars tend to dominate their acoustic cousins in both the recording studio and the live venue, especially in the "harder" genres such as heavy metal and hard rock. However the acoustic guitar remains a popular choice in country, western and especially bluegrass music, and it is widely used in folk music.

Jazz and jazz fusion

Jazz guitar playing styles include rhythm guitar-style "comping" (accompanying) with jazz chord voicings (and in some cases, walking basslines) and "blowing" (improvising solos) over jazz chord progressions with jazz-style phrasing and ornaments. The accompanying style for electric guitar in most jazz styles differs from the way chordal instruments accompany in many popular styles of music. In rock and pop, the rhythm guitarist usually performs the chords in dense and regular fashion which sets out the beat of a tune. In contrast, in many modern jazz styles, the guitarist plays much more sparsely, intermingling periodic chords and delicate voicings into pauses in the melody or solo. Jazz chord voicings are usually rootless and emphasize the 3rd and 7th notes of the chord.

When jazz guitar players improvise, they use the scales, modes, and arpeggios associated with the chords in a tune's chord progression. Jazz guitarists have to learn how to use scales (whole tone scale, chromatic scale, etc.) to solo over chord progressions. Jazz guitar improvising is not merely the recitation of jazz scales and rapid arpeggios. Jazz guitarists often try to imbue their melodic phrasing with the sense of natural breathing and legato phrasing used by horn players such as saxophone players. As well, a jazz guitarists' solo improvisations have to have a rhythmic drive and "time feel" that creates a sense of "swing" and "groove".

In addition to the traditional rhythm/comping and lead/blowing roles, some jazz guitarists use the electric instrument to play unaccompanied, combining harmony and melody to form a complete piece of music, like classical guitarists.

Most jazz guitarists play hollow body instruments, but solid body guitars are also used. Hollow body instruments were the first guitars used in jazz in the 1930s and 1940s. During the 1970s jazz fusion era, many jazz guitarists switched to the solid body guitars that dominated the rock world.

Contemporary classical music

Until the 1950s, the acoustic, nylon-stringed classical guitar was the only type of guitar favored by classical, or art music composers. In the 1950s a few contemporary classical composers began to use the electric guitar in their compositions. Examples of such works include Karlheinz Stockhausen's Gruppen (1955–57); Donald Erb's String Trio (1966), Morton Feldman's The Possibility of a New Work for Electric Guitar (1966); George Crumb's Songs, Drones, and Refrains of Death (1968); Hans Werner Henze's Versuch über Schweine (1968); Francis Thorne's Sonar Plexus (1968) and Liebesrock (1968–69), Michael Tippett's The Knot Garden (1965–70); Leonard Bernstein's MASS (1971) and Slava! (1977); Louis Andriessen's De Staat (1972–76); Helmut Lachenmann's Fassade, für grosses Orchester (1973, rev. 1987), Steve Reich's Electric Counterpoint (1987), Arvo Pärt's Miserere (1989/92), György Kurtág's Grabstein für Stephan (1989), and countless works composed for the quintet of Ástor Piazzolla. Alfred Schnittke also used electric guitar in several works, like the "Requiem", "Concerto Grosso N°2" and "Symphony N°1".

In the 1970s, 1980s and 1990s, a growing number of composers (many of them composer-performers who had grown up playing the instrument in rock bands) began writing contemporary classical music for the electric guitar. These include Frank Zappa, Shawn Lane, Steven Mackey, Nick Didkovsky, Scott Johnson, Lois V Vierk, Tim Brady, Tristan Murail, John Rogers, and Randall Woolf.

Yngwie Malmsteen released his Concerto Suite for Electric Guitar and Orchestra in 1998, and Steve Vai released a double-live CD entitled Sound Theories, of his work with the Netherlands Metropole Orchestra in June 2007. The American composers Rhys Chatham and Glenn Branca have written "symphonic" works for large ensembles of electric guitars, in some cases numbering up to 100 players, and the instrument is a core member of the Bang on a Can All-Stars (played by Mark Stewart). Still, like many electric and electronic instruments, the electric guitar remains primarily associated with rock and jazz music, rather than with classical compositions and performances. R. Prasanna plays a style of Indian classical music (Carnatic music) on the electric guitar.

In the 21st century, European avant garde composers like Richard Barrett, Fausto Romitelli, Peter Ablinger, Bernhard Lang, Claude Ledoux and Karlheinz Essl have used the electric guitar (together with extended playing techniques) in solo pieces or ensemble works. Probably the most ambitious and perhaps significant work to date is Ingwe (2003–2009) by Georges Lentz (written for Australian guitarist Zane Banks), a 60-minute work for solo electric guitar, exploring that composer's existential struggles and taking the instrument into realms previously unknown in a concert music setting.

See also

• Bass guitar
• Distortion (guitar)
• Effects pedal
• Electric pipa
• Electromagnetic induction
• Electronic tuner
• Guitar harmonics
• Guitar synthesizer
• Guitar effects
• Guitar amplifier
• Keytar
• Pickup
• Stars and Their Guitars: A History of the Electric Guitar (documentary film)
• Vintage guitar

References

• Broadbent, Peter (1997). Charlie Christian: Solo Flight – The Seminal Electric Guitarist. Ashley Mark Publishing Company. ISBN 1-872639-56-9.
• Evans, Tom (1977). Guitars: Music, history, construction and players from the Renaissance to Rock. Paddington Press. ISBN 0-448-22240-X.
• Govenar, Alan B.; Jay F. Brakefield (1998). Deep Ellum and Central Track: Where the Black and White Worlds of Dallas Converged. University of North Texas Press. ISBN 1-57441-051-2.
• Millard, André, (ed.) (2004). The Electric Guitar: A History of an American Icon. The Johns Hopkins University Press. ISBN 0-8018-7862-4.
• Wheeler, Tom (1978). The Guitar Book: A Handbook for Electric & Acoustic Guitarists. Harpercollins. ISBN 0-06-014579-X.
• Wheelwright, Lynn; Carter, Walter (28 April 2010). "Ro-Pat-In Electric Spanish". Vintage Guitar. Retrieved 8 August 2010.

External links

• ON! The Beginnings of Electric Sound Generation – an exhibit at the Museum of Making Music, National Association of Music Merchants, Carlsbad, CA – some of the earliest electric guitars and their history, from the collection of Lynn Wheelwright and others
• King of Kays Vintage guitar's from America, Japan, and Italy. Pictures, history, and forums.
• The Invention of the Electric Guitar – Online exhibition at the Smithsonian Institution's National Museum of American History