Jump to content

Eclogitization

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Jantho6 (talk | contribs) at 20:52, 7 November 2012. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Eclogitization is the newly understood tectonic process in which the high-pressure, metamorphic facies, eclogite is formed and consequently effects a change in densities, kinematics and plate motion of subduction zones. The eclogite facies records pressures between 11 kbar - 20 kbar and a range in temperature of 300°C - 1000°C.

Metamorphic facies *note the eclogite facies

There is the argument that collision between two continents should slow down because of continental buoyancy. For convergence to continue, it should do so at a new subduction zone where oceanic crust can be consumed.[1] Certain areas such as the Alps, Zargos, and Himalayas have led geologist to believe there is "continental undertow" that continues subduction. Of the many factors leading to this "continental undertow". Eclogitization is one of the leading processes that is thought to be the fuel to continuing subduction after slab detachment in a subduction zone.

.

Geologic Setting and Effect of Eclogitization

Fig 2. Eclogitization Schematic showing slab detachment and area of eclogitization

Eclogitization typically occurs at two locations in a collisional orogen (fig 2), in the subduction of crust and at the base of the crustal root of the overriding crust.[2] Eclogitization is an important metamorphic process because it provides insight into previous plate tectonic processes. At these zones within the earth, high pressures are reached as well as medium to high temperatures and eclogitization commences. Metamorphic re-crystallization during burial can lead to a significant density increase (up to 10 % in the case of eclogitization)[3] meaning, approximately 300–600 km/m3 of crustal rocks and continental lower crust and oceanic crust reach higher density than the mantle[4].

This density increase is a main driver in the convection of Earth and is a legtimate answer to questions such as, why is a tectonic unit disconnected from the descending lithosphere and why does the slab undergo exhumation after?[1]

Localities

A difficult aspect of studying eclogitization is that eclogites constitute only a very minor volume of continental basement exposed today at Earth's surface.[5] The few areas that are available to study eclogitization and view eclogites include garnet peridotites in Greenland and in other ophiolite complexes. Examples are also known in Saxony, Bavaria, Carinthia, Norway and Newfoundland. A few eclogites also occur in the northwest highlands of Scotland and the Massif Central of France. Glaucophane-eclogites occur in Italy and the Pennine Alps. Occurrences exist in western North America, including the southwest[6] and the Franciscan Formation of the California Coast Ranges.[7] Transitional Granulite-Eclogite facies granitoid, felsic volcanics, mafic rocks and granulites occur in the Musgrave Block of the Petermann Orogeny, central Australia. Recently, coesite- and glaucophane-bearing eclogites have been found in the northwestern Himalaya.[8] Although limited localities are available to study, these areas provide the crucial samples to understand exhumation as well as continued subduction by continental "undertow."

Fluid Influence on Eclogitization

Fluids are key in the process of eclogitization and delamination of crustal roots in collisional orogens, and this process is not limited by pressure and temperature conditions. Partially eclogitized amphibolites, gabbros, and granulites from the Western Gneiss Region of Norway, the Marun-Keu Complex in the polar Ural Mountains, and the Dabie-Sulu belt in China demonstrate that fluid is required for complete eclogitization.[2] An influx of fluids into the subduction zone or from the underlying mantle is key to these metamorphic reactions going forward – fluids play a much more significant role in eclogite metamorphism than either temperature or pressure.[9] Without H2O, reactions will not proceed to completion, leaving metamorphic rocks metastable at temperatures and pressures. Without eclogite metamorphism there will be no eclogitization and this may hinder continental "undertow" and slow subduction, or even eventually terminate it.

Field Studies

Cartoon Cross Section depicting tectonic evolution of eclogite terrain i.e. Laurentia and Baltic collision A)Early collisional phase with initial eclogitization of transitional margin between Laurentia and Baltica B)Continental Subduction C)Extension and exhumation where eclogites become exposed. Green eclogite symbols represent areas of active eclogitization and white symbols represent eclogites passing through retrograde conditions.
  • The Western Gneiss Region and the Bergen Arc of Western Norway: Known as one of the largest eclogitized pieces of continental crust that was exhumed during the Caledonian orogeny, studies here have shown that recrystallization of the eclogite facies is also accompanied with a significant reduction in rocks strength.[10] This is shown by a localisnation of shear zones where the host granulites have been transformed to eclogites.[5] The main point of this study was to explore the kinematics of syn-eclogite deformation in the Bergen arc which suggested that eclogitization is ultimately responsible for the separation of tectonic units from the descending lithosphere. Furthermore, despite density increase, studies show that eclogitization may trigger exhumation due to the reduction in rock strength and requires that eclogitization is not complete. This is especially true in basic and intermediate lithologies that may become denser than the mantle if eclogitization in case of complete recrystallization [10] which is shown by a localisnation of shear zones where the host granulites have been transformed to eclogites.[5]. Thus the Bergen Arc provides an excellent example of eclogitization's role in slab detachment and initiation of exhumation in a continental subduction region.
  • Mechanical Models: Simulations with viscous (ductile) and plastic (brittle) rheologies have been used to investigate the effect of eclogitization on the dynamics of convergence. A plethora of geologic settings have been modeled such as intracontinental deformation, subduction, and continental collision to determine the density and buoyancy impact of eclogitization. Instances where there was lithospheric shortening, models suggested that metamorphic transformations, such as eclogitization, have little or no influence and instead initial deformation occurs due to presence or absence of weak zones in the crust. However, in other models different results were observed such as, where lithospheric bending or subduction is obtained, material from the lower continental crust and, in the case of oceanic subduction, the oceanic crust is entrained to great depths (more than 100 km). In all of these cases eclogitization was factor in one way or another including the following,
  1. The force required for convergence at a constant velocity is significantly reduced when eclogitization has taken place, compared to models without eclogitization[11].
  2. Models have shown that eclogitization does not impact subduction initiation, but eclogitized oceanic crust contributes to the slab negative buoyancy and could help the subduction of young oceanic lithosphere.[11]
  3. The consequences of eclogitization depend heavily on the temperature within the MOHO and decoupling in the crust.

References

  1. ^ a b Alvarez, Walter (May 22, 2010). "Protracted continental collisions argue for continental plates driven by basal traction". Earth and Planetary Science Letters. ELSEVIER. pp. 434–442. {{cite web}}: |access-date= requires |url= (help); Missing or empty |url= (help)
  2. ^ a b Leech, Mary L. (February 15, 2001). "Arrested orogenic development: eclogitization, delamination, and tectonic collapse". Elsevier. pp. 149–159. Retrieved October 15, 2012.
  3. ^ Jolivet, L; et al. (June 6, 2005). "Softening Triggered by Eclogitization, the first step towards exhumation during continental subduction" (PDF). Earth and Planetary Science Letters. pp. 533–545. Retrieved October 11, 2012. {{cite web}}: Explicit use of et al. in: |author= (help)
  4. ^ Doin, Marie- Pierre; et al. (2001). "Subduction initiation and continental crust recycling: the roles of rheology and eclogitization". Tectonophysics. 342 (1–2): 163–191. {{cite journal}}: Explicit use of et al. in: |author= (help); Unknown parameter |month= ignored (help)
  5. ^ a b c Steltonphol, Mark; et al. (September 15, 2010). "Eclogitization and exhumationof Caledonian continental basementin Lofoten North Norway". Geologic Society of America. pp. 202–218. Retrieved October 12, 2012. {{cite web}}: Explicit use of et al. in: |author= (help)
  6. ^ William Alexander Deer, R. A. Howie and J. Zussman (1997) Rock-forming Minerals, Geological Society, 668 pages ISBN 1-897799-85-3
  7. ^ C. Michael Hogan (2008) Ring Mountain, The Megalithic Portal, ed. Andy Burnham
  8. ^ "Eclogite". wikipedia. Retrieved October 14, 2012.
  9. ^ Austrheim, H. (1998). "Influence of fluid and deformation on metamorphism of the deep crust and consequences for the geodynamics of collision zones". Kluwer Academic Publishers: 297–323.
  10. ^ a b Austrheim, H., Griffin, W.L. (1985). "Shear deformation and eclogite formation with the granulite-facies anorthositesof the Bergen, Western Norway". Chem. Geol. 50: 267–281.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  11. ^ a b Doin, Marie-Pierre; et al. (2001). "Subduction initiation and continental crust recycling: the roles of rheology and eclogitization". Tectonophysics. 342 (1–2): 163–191. {{cite journal}}: Explicit use of et al. in: |author= (help); Unknown parameter |month= ignored (help)
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Eclogitization&oldid=521883537"