Recorder (musical instrument)

Recorder (musical instrument)

Various recorders (second from the bottom disassembled into its three parts)

neil robinson project.

The recorder is a woodwind musical instrument of the family known as fipple flutes or internal duct flutes—whistle-like instruments which include the tin whistle. The recorder is end-blown and the mouth of the instrument is constricted by a wooden plug, known as a block or fipple. It is distinguished from other members of the family by having holes for seven fingers (the lower one or two often doubled to facilitate the production of semitones) and one for the thumb of the uppermost hand. The bore of the recorder can be tapered slightly, being widest at the mouthpiece end and narrowest towards the foot on Baroque recorders. Renaissance-era instruments generally have straight cylindrical bores. Recorders can be made out of wood, plastic or ivory.

The recorder was popular in medieval times through the baroque era, but declined in the 18th century in favour of orchestral woodwind instruments, such as the flute, oboe, and clarinet. During its heyday, the recorder was traditionally associated with pastoral scenes, miraculous events, funerals, marriages and amorous scenes. Images of recorders can be found in literature and artwork associated with all of these. Purcell, Bach, Telemann and Vivaldi used the recorder to suggest shepherds and imitate birds in their music, a theme that continued in 20th-century music.

The recorder was revived in the 20th century, partly in the pursuit of historically informed performance of early music, but also because of its suitability as a simple instrument for teaching music and its appeal to amateur players. Today, it is sometimes thought of as a child's instrument, but there are many professional players who demonstrate the instrument's full solo range. The sound of the recorder is remarkably clear and sweet, partly because of the lack of upper harmonics and predominance of odd harmonics in the sound.

Name of the instrument

The instrument has been known by its modern name at least since the 14th century. Grove's Dictionary reports the earliest use of the word 'recorder' was in the household of the Earl of Derby (later to become King Henry IV) in 1388: fistula nomine Recordour. The name originates from the use of the word ricordare especiale, which means "remember" in Italian.

Up to the 18th century, the instrument was called flauto in Italian, the language used in writing music, whereas the instrument we today call the flute was called traverso. This has led to some pieces of music occasionally being mistakenly performed on the flauto traverso (transverse flute) rather than on the recorder.

Today, the recorder is known as flauto dolce in Italian (sweet flute), with equivalents in other languages, such as flauta doce in Portuguese and flauta dulce in Spanish. In those two languages, the name flauta is ambiguous, as it can mean any kind of transverse flutes, a recorder, or different other types of wind blown instruments, like the pan flute and some instruments used by the descendants of native peoples of the Central and South Americas (with varied degrees of influence of European instruments). In French the word flûte is similarly ambiguous (the French translation is "flûte à bec", literally "beaked flute"), and it is also called flauta de pico in Spanish, meaning the same. From the "Block", (fipple plug) in German the instrument is known as Blockflöte, while the modern flute is called Querflöte (literally from flauto traverso), Großflöte (great flute) or simply Flöte. Naming in Dutch follows the same convention as in German, with blokfluit naming the recorder and dwarsfluit the flute.

Types of recorders

Recorder family

In C	Range	In F	Range
de		sopranino Listen to it
descant (soprano) Listen to it		treble (alto)
tenor		bass
great bass		contra bass
subcontra bass or contra great bass		sub-subcontrabass or double contra bass (octocontrabass)

Recorder with German fingering. Note that the 4th finger-hole is larger than the 5th.

Sizes

Recorders are made in a variety of sizes and each has its own register. They are most often tuned in C or F, meaning their lowest note possible is a C or an F. However, instruments in D, B-flat, G, and E-flat were not uncommon historically and are still found today, especially the treble (alto) recorder in G, commonly used in Renaissance ensembles, and the tenor recorder in D, which is called a "voice-flute." The table shows the recorders in common use, though the large ones are very rare.

The recorder most often used for solo music is the treble recorder (known as alto in the USA), and when the recorder is specified without further qualification, it is this size that is meant. The descant (known as the soprano in the USA) also has an important repertoire of solo music (not just school music) and there is a little for tenor and bass recorders. Classroom instructors most commonly use the descant. The largest recorders, larger than the bass recorder, are less often used, since they are expensive and their sizes (the contrabass in F is about 2 metres tall) make them hard to handle. An experimental 'piccolino' has also been produced which plays a fourth above the garklein. Although it might be considered that the garklein is already too small for adult-sized fingers to play easily and that the even smaller piccolino is simply not practical, the fact that the holes for each finger are side by side and not in a linear sequence make it quite possible to play.

For recorder ensemble playing, the descant (soprano), treble (alto), tenor and bass are most common – many players can play all four sizes. Great basses and contrabasses are always welcome but are more expensive. The sopranino does not blend as well and is used primarily in recorder orchestras and for concerto playing. The larger recorders have great enough distances between the finger holes that most people's hands can not reach them all. So, instruments larger than the tenor have keys to enable the player to cover the holes or to provide better tonal response; this is also true of the tenor itself, over the last hole, and much more rarely the alto. In addition, the largest recorders are so long that the player cannot simultaneously reach the finger holes with the hands and reach the mouthpiece with the lips. So, instruments larger than the bass (and some bass recorders too) may use a bocal or crook, a thin metal tube, to conduct the player's breath to the windway, or they may be constructed in sections that fold the recorder into a shape that brings the mouthpiece closer to the player..

Construction

Today, high-quality recorders are made from a range of hardwoods: maple, pear wood, rosewood, grenadilla, or boxwood with a block of red cedar wood. Plastic recorders are produced in large quantities. Plastics are cheaper and require less maintenance and quality plastic recorders (especially Aulos and Yamaha) are equal to or better than lower-end wooden instruments. Beginners' instruments, the sort usually found in children's ensembles, are plastic and can be purchased quite cheaply.

Most modern recorders are based on instruments from the Baroque period, although some specialist makers produce replicas of the earlier Renaissance style of instrument. These latter instruments have a wider, less tapered bore and typically possess a less reedy, more blending tone more suited to consort playing.

Some newer designs of recorder are now being produced. Larger recorders built like organ pipes with square cross-sections are cheaper than the normal designs if, perhaps, not so elegant. Another area is the development of instruments with a greater dynamic range and more powerful bottom notes. These modern designs make it easier to be heard when playing concertos. Finally, recorders with a downward extension of a semitone are becoming available; such instruments can play a full three octaves in tune. The tenor is especially popular, since its range becomes that of the modern flute; Frans Brüggen has publicly performed such flute works as Density 21.5 by Edgard Varèse on an extended tenor recorder.

German fingering

In the early part of the 20th century, de developed a recorder that allowed for apparently simpler fingering, called German fingering. A recorder designed for German fingering has a hole five which is smaller than hole four, whereas baroque and neo-baroque recorders have a hole four which is smaller than hole five. The immediate difference in fingering is for F and B♭ which on a neo-baroque instrument must be fingered 0 123 4–67. With German fingering, this becomes a simpler 0 123 4 – – –. Unfortunately, however, this causes many other chromatic notes to be too badly out of tune to be usable. German fingering became popular in Europe, especially Germany, in the 1930s, but rapidly became obsolete in the 1950s as the recorder began to be treated more seriously and the limitations of German fingering became more widely appreciated. Despite this, many recorder makers continue to produce German fingered instruments today, essentially for beginner use only.

Notation and pitch

Recorders are most commonly pitched at concert pitch (A=440 Hz). However, among serious amateurs and professionals, two other standard pitches are commonly found. For baroque instruments, A=415 Hz is the de facto standard, while renaissance instruments are often pitched at A=466 Hz. Both tunings are a compromise between historical accuracy and practicality. For instance, the Stanesby Sr alto, copied by many contemporary makers is based on A=403 Hz; some makers indeed offer an instrument at that pitch. Some recorder makers offer 3-piece instruments with two middle sections, accommodating two tuning systems. At 415 Hz, a semitone lower than 440 Hz, recorders can play with those harpsichords that are also tuned to that pitch.

The recorder family is non-transposing, which means that sheet music for recorder is nearly always written in the key in which it is played. A written C in the score actually sounds as a C. (The higher members of the family (soprano and above) transpose at the octave, as do the bass instruments (bass and great bass)). Recorders are referred to as "D-fingered", "C-fingered", "G-fingered", "F-fingered", etc., depending on the lowest note, fingered with all holes closed ("C-fingered" and "F-fingered" instruments being the most common). This implies that the player must learn two different sets of similar fingerings, one for the C recorders and another for the F recorders. A player may go from one C-fingered instrument to another easily, and from one F-fingered instrument to another easily, but switching between the two requires knowing both sets of fingerings, or the ability to transpose the music at sight.

Most recorders do transpose at the octave. The garklein sounds two octaves above the written pitch; the sopranino and descant (soprano) sound one octave above written pitch. Treble (alto) and tenor sizes do not transpose at all, while the bass and great bass sound one octave above written (bass clef) pitch. In modern scores, these transpositions are indicated by adding a small figure "8" above the treble or bass clef on sopranino, soprano or bass recorder parts, but in the past and still commonly today, the transpositions are not indicated and instead are assumed from context. Contrabass and sub contrabass are non-transposing while the octocontrabass sounds one octave below written pitch.

Sizes from garklein down through tenor are notated in the treble clef while the bass size and lower usually read the bass clef. Professionals can usually read C-clefs and often perform from original notation.

Alternative notations which are only occasionally used:

1. Bass recorder in F may be written in treble clef so that the low F is written an octave above real pitch (i.e. sound an octave below written pitch), so that its fingerings are completely octave-identical to the alto in F.
2. Great bass recorder in C may be written in treble clef. If so, it would probably be written up an octave to match the fingering of the tenor in C.
3. Tenor recorder in C may be written in bass clef one octave below real pitch in order to read choral parts for tenor voice.
4. Treble (alto) recorder in F may be written down an octave to read alto vocal parts.
5. All recorders may be transposed by both octave and key so that the lowest note is always written as middle C below the treble clef. In this system, only the tenor is non-transposing while all other parts would transpose up or down in fourths, fifths and octaves as appropriate.
6. Urtext editions of baroque music may preserve the baroque practice of writing treble(alto) recorder parts in the French Violin clef (G clef on the bottom line of the stave). From the player's point of view, this is equivalent to using bass(et) recorder fingerings on the treble/alto recorder.

As a rule of thumb, recorders sound one octave above the human voice after which they are named (soprano recorder is an octave above soprano voice, alto an octave above alto voice, etc.) The recorder's mellow tone and limited harmonics allows for the seemingly deeper sound.

How the instrument is played

Cross-section of the head of a recorder

The recorder is held outwards from the player's lips (rather than to the side, like the "transverse" flute). The player's breath is compressed into a linear airstream by a channel cut into the wooden "block" or fipple (A), in the mouthpiece of the instrument, so as to travel along this channeled duct (B) called the "windway". Exiting from the windway, the breath is directed against a hard edge (C), called the "labium" or "ramp", which causes the column of air within the resonator tube to oscillate with standing waves. Unlike simple whistles where holes are progressively unstopped, the recorder uses half-holing and forking (see below) to modify the position of the nodes.

It is easiest to consider the pressure nodes rather than the displacement nodes. A half hole or a fork fingering does not allow all the pressure to escape, like a leaky valve, and so the pressure under the (half) open hole is higher than expected, leading to the node being displaced down the tube. The analysis of the higher registers will produce a series of closely (but not identically) spaced nodes down the tube but which, since they are coupled, modify each other to produce a single pitch.

Basic fingering

Recorder fingerings (baroque): Lowest note through the nominal range of 2 octaves and a tone

Note		First octave											Second octave											Third octave
Tuned³ in F	Tuned in C	Hole 0		Hole 1	Hole 2	Hole 3		Hole 4	Hole 5	Hole 6	Hole 7		Hole 0		Hole 1	Hole 2	Hole 3		Hole 4	Hole 5	Hole 6	Hole 7		Hole 0		Hole 1	Hole 2	Hole 3		Hole 4	Hole 5	Hole 6	Hole 7
F	C	●		●	●	●		●	●	●	●		●		○	●	○		○	○	○	○		◐		●	○	○		●	●	○	○
F♯/G♭	C♯/D♭	●		●	●	●		●	●	●	◐		○		●	●	○		○	○	○	○
G	D	●		●	●	●		●	●	●	○		○		○	●	○		○	○	○	○		◐		●	○	●		●	○	●	●²
G♯/A♭	D♯/E♭	●		●	●	●		●	●	◐	○		○		○	●	●		●	●	●	○
A	E	●		●	●	●		●	●	○	○		◐		●	●	●		●	●	○	○
A♯/B♭	F	●		●	●	●		●	○	●	●		◐		●	●	●		●	○	●	○
B	F♯/G♭	●		●	●	●		○	●	●	○		◐		●	●	●		○	●	○	○
C	G	●		●	●	●		○	○	○	○		◐		●	●	●		○	○	○	○
C♯/D♭	G♯/A♭	●		●	●	○		●	●	◐	○		◐		●	●	○		●	○	○	○
D	A	●		●	●	○		○	○	○	○		◐		●	●	○		○	○	○	○
D♯/E♭	A♯/B♭	●		●	○	●		●	○	○	○		◐		●	●	○		●	●	●	○
E	B	●		●	○	○		○	○	○	○		◐		●	●	○		●	●	○	○

Note 1: The bell must be stopped to play this note.
Note 2: Individual recorders may need this hole to be closed (●), half closed (◐), or open (○) to play the note in tune.
Note 3: See the section Types of recorders concerning recorders tuned in C or in F.
● means to cover the hole. ○ means to uncover the hole. ◐ means half-cover.

How the fingers and holes are numbered

Fingers	Holes

The range of a modern recorder is usually taken to be about two octaves except in virtuoso pieces. See the table above for fingerings of notes in the nominal recorder range of 2 octaves and 1 whole tone. Notes above this range are more difficult to play, and the exact fingerings vary from instrument to instrument, so it is impractical to put them into the table here. The numbers at the top correspond to the fingers and the holes on the recorder, according to the pictures.

The note two octaves and one semitone above the lowest note (C♯ for soprano, tenor and great bass instruments; F♯ for sopranino, alto and bass instruments) is difficult to play on most recorders. These notes are best played by covering the end of the instrument (the "bell"); players typically use their upper leg to accomplish this. Some recorder makers added a special bell key for this note – newer recorder designs with longer bores also solve this problem and extend the range even further. The note is only occasionally found in pre-20th-century music, but it has become standard in modern music.

Some fonts show miniature glyphs of complete recorder fingering charts in TrueType format. Because there are no Unicode values for complete recorder fingering charts, these fonts are custom encoded.

Half-holing and forking

The lowest chromatic scale degrees – a semitone and a minor third above the lowest note – are played by covering only a part of a hole, a technique known as "half-holing." Most modern instruments are constructed with double holes or keys to facilitate the playing of these notes; such double holes are occasionally found on baroque instruments, where even the hole for the third finger of the left hand can be doubled. Other chromatic scale degrees are played by so-called "fork" fingerings, uncovering one hole and covering one or more of the ones below it. Fork fingerings have a different tonal character from the diatonic notes, giving the recorder a somewhat uneven sound. Budget tenor/bass recorders might have a single key for low C/F but not low C♯/F♯, making this note virtually impossible to play. Double low keys allowing both C/F and C♯/F♯ are more or less standard today.

Pinching

Most of the notes in the second octave and above are produced by partially closing the thumbhole on the back of the recorder, a technique known as "pinching". The placement of the thumb is crucial to the intonation and stability of these notes, and varies as the notes increase in pitch, making the boring of a double hole for the thumb unviable. To play the notes in the second octave, the player must tongue somewhat harder in order to excite the second and third harmonics of the instrument.

Notes in the third octave

A skilled player can, with a good recorder, play chromatically over two octaves and a fifth. Use of notes in the 3rd octave is becoming more common in modern compositions; several of these notes require closure of the bell or shading of the window area (i.e. holding the palm of the hand above the window, partially restricting the air emerging from it). In the hands of a competent player, these upper notes are not especially loud or shrill.

The renaissance recorder had a range of two octaves and a sixth, though writers on woodwind instruments in general from that period, e.g. Michael Praetorius, often give shorter ranges. This might reflect a distinction between skilled and unskilled players in the renaissance or the differences in instruments made in one region versus another or over time. Modern reproductions of renaissance instruments, especially those from the middle of the last century, often have a range as little as one and a half octaves but more recent makers now produce reproduction renaissance instruments with the full range and Ganassi's fingerings. Consequently many publishers of recorder music refer to 'music for Ganassi recorder', or a similar phrase, when they mean recorder music with a range greater than two octaves and a tone.

Dynamics

Changes in dynamics are not easy to achieve on the recorder if the player is accustomed to other wind instruments. The general belief is that if the player blows harder to play louder, or more softly to play softer, the pitch changes and the note goes out of tune, and unlike the transverse flute, the player cannot change the position of the mouth in relation to the labium in order to compensate, and that therefore the recorder is not capable of dynamic changes. This is misleading. It is true that in the hands of a skilled player changes in dynamics by simply blowing harder or softer are possible provided the instrument is of a high quality and the player knows the instrument well. Subtle changes in wind pressure are possible if the player has a good ear for tuning and knows how hard the instrument can be pushed before pitch changes become noticeable. But this is not the correct approach to recorder dynamics. On the recorder it is better to think of the breath controlling pitch, and the fingers controlling dynamics; for example by resting the fingers lightly on the holes breath leaks around them, lifting the pitch; and the resulting instinctive change in breath pressure to bring the pitch back also drops the volume. Advanced players use alternative fingerings to enable changes in dynamics. The recorder is notable for its sensitivity to articulation; in addition to its obvious use for artistic effect skilled players can also use this sensitivity to suggest changes in volume.

History

Early recorders

Internal duct-flutes have a long history: an example of an Iron Age specimen, made from a sheep bone, exists in Leeds City Museum.

The true recorders are distinguished from other internal duct flutes by having eight finger holes; seven on the front of the instrument and one, for the upper hand thumb, on the back, and having a slightly tapered bore, with its widest end at the mouthpiece. It is thought that these instruments evolved in the 14th century, but an earlier origin is a matter of some debate, based on the depiction of various whistles in medieval paintings. To this day whistles – as used in Irish folk music – have six holes. The original design of the transverse flute (and its fingering) was based on the same six holes, but it was later much altered by Theobald Böhm.

One of the earliest surviving instruments was discovered in a castle moat in Dordrecht, the Netherlands in 1940, and has been dated to the 14th century. It is largely intact, though not playable. A second more or less intact 14th-century recorder was found in a latrine in northern Germany (in Göttingen): other 14th-century examples survive from Esslingen (Germany), Tartu (Estonia), and Nysa (Poland). There is a fragment of a possible 14th- or 15th-century bone recorder in Rhodes (Greece); and there is an intact 15th-century example from Elblag (Poland).

The earliest recorders were designed to be played either right-handed (with the right hand lowermost) or left-handed (with the left hand lowermost). The holes were all in a line except for the lowest hole, for the lower hand little finger. This last hole was offset from the center line, and drilled twice, once on each side. The player would fill in the hole they didn't want to use with wax. It is this doubled hole (not to be confused with the later double holes for semitones) which accounts for the early French name flute à neuf trous. In later years, the right-hand style of playing was settled on as standard and the second hole disappeared.

Renaissance

Renaissance recorders

The recorder achieved great popularity in the 16th and 17th centuries. This development was linked to the fact that art music (as opposed to folk music) was no longer the exclusive domain of nobility and clergy. The advent of the printing press made it available to the more affluent commoners as well. The popularity of the instrument also reached the courts however. For example, at Henry VIII's death in 1547, an inventory of his possessions included 76 recorders. There are also numerous references to the instrument in contemporary literature (e.g. Shakespeare and Milton).

During the Renaissance musical instruments were principally used in dance music and as accompaniment for voices. There are many vocal works with non-texted lines, which possibly were written for instruments. In addition, some vocal music was easily playable with instruments, chansons, for example. Nevertheless, composers also produced more and more works exclusively for instruments, often based on dance music. (e.g. the Lachrimae Pavans by John Dowland). Often they did not specify the instruments to use although some, such as Anthony Holborne, indicated that their music was suitable for the recorder. However, even when the composer specified, for instance, viols, the music could successfully be played on recorders. A taste for ensembles of like instruments developed in this era, and so arose "consorts" (groups of musicians playing the same type of instrument) and the families of instruments of various sizes. The diversity of sizes in an instrument family allowed the consort to play music with a very large pitch range. Some of the well known Renaissance composers who wrote instrumental music, or whose vocal music plays well on recorders, were:

• Guillaume Dufay
• Johannes Ockeghem
• Josquin des Prez
• Heinrich Isaac
• Ludwig Senfl
• Orlando di Lasso
• William Byrd
• John Dowland
• Anthony Holborne

Polyphony was the dominant music style of the Renaissance, but composers also began to write chordal pieces. The Medieval custom of juxtaposing 2 or 3 different melodies coexisted with "imitative polyphony". Imitative polyphony uses only one melodic line, but breaks it in pieces and divides it among the different parts. One part plays the melody, then the other parts play it in their turns. The music of this epoch was characterized by complex improvised ornamentation.

Many instruments survive from this period, including an incomplete set of recorders in Nuremberg which date from the 16th century and are still partially playable. Similar to the Medieval recorders, and unlike the Baroque style recorders typically used today, Renaissance recorders have a wide, more or less cylindrical bore. They have powerful low notes (much more so than the Baroque recorders). The wide bore means that a greater quantity of air is required to play the instrument, but this makes them more responsive. Many reproduction instruments, especially from the middle of the last century, can only be played reliably over a range of an octave and a sixth; but more and more makers are producing recorders capable of the full range that Ganassi reports, and with his fingerings in tune throughout. When modern music is written for 'Ganassi recorders' it is this type of recorder which is intended. Historically there was, in truth, no such thing as the 'Ganassi' recorder as a distinct type; it was simply the ordinary Renaissance recorder played by a good player who understood the instrument.

Baroque recorders

Several changes in the construction of recorders took place in the 17th century, resulting in the type of instrument generally referred to as Baroque recorders, as opposed to the earlier Renaissance recorders. These innovations allowed baroque recorders to possess a tone which was regarded as "sweeter" than that of the earlier instruments, at the expense of a reduction in volume, particularly in the lowest notes, and a slightly reduced range.

In the 18th century, rather confusingly, the instrument was normally referred to simply as Flute (Flauto) – the transverse form was separately referred to as Traverso. In the 4th Brandenburg Concerto in G major, J.S. Bach calls for two flauti d'echo. The musicologist Thurston Dart mistakenly suggested that it was intended for flageolets at a higher pitch, and in a recording under Neville Marriner using Dart's editions it was played an octave higher than usual on sopranino recorders. An argument can be made that the instruments Bach identified as flauti d'echo were echo flutes, an example of which survives in Leipzig to this day. It consisted of two recorders in f' connected together by leather flanges: one instrument was voiced to play softly, the other loudly. Vivaldi wrote three concertos for the flautino and required the same instrument in his opera orchestra. In modern performance, the flautino was initially thought to be the piccolo. It is now generally accepted, however, that the instrument intended was some variant of the sopranino recorder.

Decline of the recorder

The instrument went into decline after the 18th century, being used for about the last time as an otherworldly sound by Gluck in his opera Orfeo ed Euridice. Many reasons have been put forward for this decline. One possible reason is that the main flute innovators of the time, Grenser, Tromlitz, and others, extended the transverse flute's range and evened out its tonal consistency, making it more appealing than the recorder. Also, the fixed relationship of the windway to the labium limits the range of dynamics and expression of the recorder, when compared with the transverse flute. Another possible reason was the fact that music as an amateur pastime was declining in favour of the professional musician combined with the fact that composers began writing exclusively for professional ensembles. Other possible reasons include an apparent lack of sufficient professional players; a change in musical tastes; a lack of appreciation of the true nature of the recorder by composers; the high pitch of the instrument; the problems (for makers and players) of utilising the full chromatic range; and a perceived bad reputation of the instrument based on all these factors.

By the Romantic era, the recorder had been almost entirely superseded by the flute and clarinet. One variant of the recorder survived into the 19th-century concert halls, however: the keyed recorder known as the czakan or Stockflöte.

The art of recorder making never completely died, though. Berchtesgaden Fleitl continue to be made to this day by Bernhard Oeggle, whose great-grandfather Georg learned his craft from Paul Walch (c. 1862–1873), the last of three generations of the Walch family of recorder makers. Similarly, the careers of the Schlosser family of woodwind makers from the town of Zwota can be traced over five generations. Their founder was Johan Gabriel Sr who was active in the early 19th century; Rüdiger, who seems to have been the last maker, died in 2005. Heinrich Oskar (1875–1947) made instruments sold by the firm of Moeck in Celle and helped to design their Tuju series of recorders.

Modern revival

The recorder was revived around the turn of the 20th century by early music enthusiasts, but used almost exclusively for this purpose. It was considered a mainly historical instrument. Even in the early 20th century it was uncommon enough that Stravinsky thought it to be a kind of clarinet, which is not surprising since the early clarinet was, in a sense, derived from the recorder, at least in its outward appearance.

The eventual success of the recorder in the modern era is often attributed to Arnold Dolmetsch in the UK and various German scholar/performers. While he was responsible for broadening interest beyond that of the early music specialist in the UK, Dolmetsch was far from being solely responsible for the recorder's revival. On the Continent his efforts were preceded by those of musicians at the Brussels Conservatoire (where Dolmetsch received his training), and by the performances of the Bogenhauser Künstlerkapelle (Bogenhausen Artists' Band) based in Germany. Over the period from 1890-1939 the Bogenhausers played music of all ages, including arrangements of classical and romantic music. Also in Germany, the work of Willibald Gurlitt, Werner Danckerts and Gustav Scheck proceeded quite independently of the Dolmetsches. Thus the revival, far from being the work of one man, was the result of several strands coming and working together.

Among the influential virtuosos who figure in the revival of the recorder as a serious concert instrument in the latter part of the 20th century are Ferdinand Conrad, Kees Otten, Frans Brüggen, Roger Cotte, Hans-Martin Linde, Bernard Krainis, and David Munrow. Brüggen recorded most of the landmarks of the historical repertoire and commissioned a substantial number of new works for the recorder. Munrow's 1975 double album The Art of the Recorder remains as an important anthology of recorder music through the ages.

Another famous and popular performer is Michala Petri, who has toured extensively, recorded many discs of old and new pieces, and had quite a number of works written for her, including concertos by Malcolm Arnold and Richard Harvey.

Carl Dolmetsch, the son of Arnold Dolmetsch, became one of the first virtuoso recorder players in the 1920s; but more importantly he began to commission recorder works from leading composers of his day, especially for performance at the Haslemere festival which his father ran. Initially as a result of this, and later as a result of the development of a Dutch school of recorder playing led by Kees Otten, the recorder was introduced to serious musicians as a virtuoso solo instrument both in Britain and in northern Europe, and consequently modern composers of great stature have written for the recorder, including Paul Hindemith, Luciano Berio, Jürg Baur, Josef Tal, John Tavener, Michael Tippett, Benjamin Britten, Leonard Bernstein, Gordon Jacob, Malcolm Arnold, Steven Stucky and Edmund Rubbra.

The recorder is often used in popular music, including that of groups such as The Beatles; the Rolling Stones (see, for example, "Ruby Tuesday"); Yes, for example, in the song "I've Seen All Good People"; Jefferson Airplane (see Personnel as well as Grace Slick); Led Zeppelin (Stairway to Heaven); Jimi Hendrix; Siouxsie and the Banshees; Judy Dyble of Fairport Convention; Dido; and Mannheim Steamroller.

Some modern music calls for the recorder to produce unusual noises, rhythms and effects, by such techniques as flutter-tonguing and overblowing to produce multiphonics. David Murphy's 2002 composition Bavardage is an example, as is Hans Martin Linde's Music for a Bird.

Among late 20th-century and early 21st-century recorder ensembles, the trio Sour Cream (led by Frans Brüggen), Flautando Köln, the Flanders Recorder Quartet, Amsterdam Loeki Stardust Quartet and Quartet New Generation have programmed remarkable mixtures of historical and contemporary repertoire. Piers Adams is a recorder player who has toured and recorded widely, as well as being involved in education.

One of the finalists in the 2012 BBC Young Musician of the Year was a recorder player, Charlotte Barbour-Condini.

Use in schools

Plastic recorder (Yamaha)

In the mid-20th century, German composer and music educator Carl Orff popularized the recorder for use in schools as part of Orff-Schulwerk programs in German schools. Orff's five-volume opus of educational music Music for Children contains many pieces for recorders, usually scored for other instruments as well.

Manufacturers of the era made recorders out of bakelite and more modern plastics which made them cheap and quick to produce. Because of this, recorders became very popular in schools, as they are one of the cheapest instruments to buy in bulk. They are also relatively easy to play at a basic level as they are pre-tuned. It is, however, incorrect to assume that mastery is similarly easy—like other instruments, the recorder requires significant study to play at an advanced level.

The success of the recorder in schools is partly responsible for its poor reputation as a "child's instrument". Although the recorder is ready-tuned, it is very easy to warp the pitch by over or under blowing, which often results in an unpleasant sound from beginners.

Makers

The evolution of the Renaissance recorder into the Baroque instrument is generally attributed to the Hotteterre family, in France. They developed the ideas of a more tapered bore, bringing the finger-holes of the lowermost hand closer together, allowing greater range, and enabling the construction of instruments in several jointed sections. The last innovation allowed more accurate shaping of each section and also offered the player minor tuning adjustments, by slightly pulling out one of the sections to lengthen the instrument.

The French innovations were taken to London by Pierre Bressan, a set of whose instruments survive in the Grosvenor Museum, Chester, as do other examples in various American, European and Japanese museums and private collections. Bressan's contemporary, Thomas Stanesby, was born in Derbyshire but became an instrument maker in London. He and his son (Thomas Stanesby junior) were the other important British-based recorder-makers of the early 18th century.

In continental Europe, the Denner family of Nuremberg were the most celebrated makers of this period.

From top to bottom: bass, tenor, treble (alto), descant (soprano) and sopranino recorders

Many modern recorders are based on the dimensions and construction of surviving instruments produced by Bressan, the Stanesbys or the Denner family. Well-known larger contemporary makers of recorders include Angel (South Korea), Aulos (Japan), Moeck (Germany), Dolmetsch (England), Mollenhauer (Germany), Fehr, Huber, Küng (Switzerland) and Yamaha (Japan). Smaller workshops include names such as Takeyama, Von Huene, Rohmer, Adrian Brown, Prescott, Marvin, Cranmore, Amman, Beaudin, Blezinger, Boudreau, Netsch, Coomber, Grinter, Ehlert.

Recorder ensembles

The recorder is a very social instrument. Many amateurs enjoy playing in large groups or in one-to-a-part chamber groups, and there is a wide variety of music for such groupings including many modern works. Groups of different sized instruments help to compensate for the limited note range of the individual instruments. Four part arrangements with a soprano, alto, tenor and bass part played on the corresponding recorders are common, although more complex arrangements with multiple parts for each instrument and parts for lower and higher instruments may also be regularly encountered.

Bibliographies

• Richard Griscomb and David Lasoccki. The Recorder: a Research and Information Guide 3rd ed. (Routledge Music Bibliographies) NY & London:Routledge, 2012. ISBN 978-0-415-99858-1 (print) ISBN 978-0-203-87502-5 (e-book) "A guide to the writings about the recorder for players and researchers" (preface)

External links

• Recorder Home Page – A comprehensive website devoted to the recorder
• Recorder Fingerings – Charts and trill charts, recorder-fingerings.com
• Historical recorder fingering charts
• How the recorder works
• Recorder fingerings, Dolmetsch Online
• Recorder fingerings, Woodwind Fingering Guide