Wamsutta Mills

Wamsutta Mills
U.S. National Register of Historic Places
U.S. Historic district
Location	Acushnet Ave., Logan, Wamsutta and N. Front St., New Bedford, Massachusetts
Area	19.3 acres (7.8 ha)
Built	1847
Architectural style	Other, Utilitarian industrial
NRHP reference No.	08000794
Added to NRHP	August 19, 2008

Wamsutta Mills was a textile manufacturing company located in New Bedford, Massachusetts, a port which was known as a center of the whaling industry. The company was named after Wamsutta, the son of a Native American chief who negotiated an early alliance with the English settlers of the Plymouth Colony in the 17th century. Wamsutta Company's textile mill was founded by Thomas Bennett, Jr. on the banks of the Acushnet River in 1846 and opened in 1848. It was the first of many textile mills that gradually came to overtake whaling as the principal employer in New Bedford. Other mills in the area soon sprang up. By the 1870s, cotton textile manufacture was more important to the local economy than whaling. Wamsutta Mills became well known for producing fine quality shirtings, sheetings and other fine cotton products. The Wamsutta brand continues to this day.

History

Wamsutta Mill No. 6

Planning and Raising Funds

The Wamsutta Mills were conceived by Thomas Bennett, Jr. of nearby Fairhaven, Massachusetts. Bennett originally planned to locate the mill in Georgia, where he had previously worked for fellow Fairhaven native Dwight Perry, in a mill. However, one prominent investor, Congressman Joseph Grinnell stipulated that the mill be located in his home city, New Bedford.

On April 8, 1846, the new corporation was granted a charter from the Massachusetts General Court. By mid-1847, Bennett raised $160,000 for the mill, mostly in small investments of ten shares or less from skeptical New Bedford businessmen who were unfamiliar with the textile industry. The first meeting of the stockholders was held in 1847 and Joseph Grinnell was elected president and Thomas Bennett, Jr., who had served as the superintendent of the Wamsutta Mills from 1846 until 1874, the secretary.

Early development

Construction of the first mill began in 1847. Designed by Seth Ingalls of New Bedford, it was a stone structure, 212 feet (65 m) long by 70 feet (21 m) wide, with five stories. David Whitman of Rhode Island served as an advisor during the construction and setup of the mill, which was initially fitted with 10,000 spindles, with room for 5,000 more. Cloth production began in February of 1849, and housing was built for its workers. Soon business began to boom, with capital increasing to $300,000 in 1853. A second four story mill, 240 feet (73 m) long by 70 feet (21 m) wide, was built in 1855. A third mill, a duplicate of the second, was built in 1860–1861 outfitted in 1862 and opened in 1865; the delay was due to the Civil War and labor and product shortages. By 1868 the capitalization of the company jumped to $2,000,000 and a fourth bigger mill was built. Mill No. 4 was constructed in brick, 495 feet (151 m) long by 70 feet (21 m) wide with four stories.

Further development

Thomas Bennett, Jr. retired as superintendent in 1874 and was replaced by Edward Kilburn, though the company continued to grow. By 1875, capital reached $2,500,000, and Australia had recently been added as a shipping destination. Mill 5 was added north of Mill No. 4. Also of brick construction, it is 433 feet (132 m) long by 93 feet (28 m) wide. Shortly after, and production of percale fabric began (New Bedford is known to be the first city in the United States to make fine cotton). In 1880, the Wamsutta Mills replaced the old Whitin spindles with 20,000 new Rabeth spindles, which were made in Pawtucket, Rhode Island by the Fales and Jenks Machine Company. In 1882 the construction of mill number 6 was begun. It is also of brick, three stories high and 569 feet (173 m) long by 95 feet (29 m) wide.

Economic success

In 1883, the Wamsutta Mills had six mills and produced 26 million yards of cotton cloth annually. Joseph Grinnell remained on until 1885 when he died at the age of 96; and Andrew G. Pierce, William Wallace Crapo, Oliver Prescott, and Charles F. Broughton successively took his place. Soon after, in 1892, Wamsutta owned a total of seven mills, and was the largest cotton weaving plant in the world. By 1897 Wamsutta was operating 4,450 looms and employing 2,100 workers.

In 1917 plans were in the works for this massive mill to receive a modernization overhaul. Machinery was upgraded and replaced and the steam power was replaced with electric. A new focus was directed toward fine sheets and pillowcases complete with advertising campaign geared towards the public. By this time, the company operated a total of 229,000 spindles and 4,310 looms, in a city with numerous large spinning and weaving mills.

Prior to the Great Depression, in the 1920s, the city of New Bedford, along with many other northern textile towns had their own depression. During this time, four of the city's factories closed down. The following decade almost two dozen closed. Wamsutta, however, increased its sales in 1925 while others were liquidating and closing. By 1935, their sheets were henceforth known as Supercale instead of percale. Additionally, they manufactured a new product called Lustercale, a blend of 60% cotton and 40% high strength Avril rayon. This blend feels like cotton but is somewhat softer. At some point Wamsutta changed the fiber content of Lustercale to 100% cotton. They also created the perfect weave for sails on sailing ships. Furthermore, because of the wars, they created tailored their products for hot air balloons, gas mask fabric, military uniforms, and supplies. Many other fabric types were created for many other purposes and to this day Wamsutta remains a household name for fabrics.

Recent events

In modern times, Wamsutta is a brand name of Springs Global US, Inc., a textile conglomerate headquartered in Fort Mill, South Carolina.

In 2004, the historic Wamustta Mills complex in Massachusetts was slated for redevelopment according to officials of New Bedford. The renovation will also include a 8,000-square-foot (740 m²) museum featuring items such as old mill equipment and garments created at the mills.

A ribbon cutting ceremony celebrating the initiation of the renovation of the mill was held on November 8, 2006.

The historic Wamsutta complex also houses the New Bedford Antiques Company, as well as the Glass Museum.

See also

• List of mills in New Bedford, Massachusetts
• National Register of Historic Places listings in New Bedford, Massachusetts

Further reading

• Hough, Henry Beetle. Wamsutta of New Bedford 1846–1946. The Vineyard Gazette, ed. New Bedford: William E. Rudge’s Sons, Wamsutta Mills, 1946. Print.

External links

• Wamsutta Mills - Historic American Buildings Survey
• Renovation Article November 01, 2006