Colt AR-15
AR-15 | |
---|---|
Type | Semi-automatic rifle / service rifle |
Place of origin | United States |
Service history | |
In service | 1958–present |
Production history | |
Designer | Eugene Stoner, Jim Sullivan, Bob Fremont |
Designed | 1957 |
Manufacturer | ArmaLite, Colt, Bushmaster, Rock River Arms, Stag Arms, DPMS Panther Arms, Olympic Arms, and others. |
Specifications | |
Mass | 2.27 kg–3.9 kg (5.5–8.5 lb) |
Barrel length |
|
Cartridge | .223 Remington, 5.56 NATO, 300 Whisper, 7.62x35mm, .22 long rifle |
Action | Direct impingement / Rotating bolt |
Rate of fire | 800 rounds/min (pre-ban fully automatic versions only)[1][2][3] |
Muzzle velocity | 975 m/s (3,200 ft/s)[4] |
Effective firing range | 400–600 m (avg 547 yd)[5][6] |
Feed system | Various STANAG magazines. 5, 9, 10, 20, 30, 40, 50 STANAG 60 and 100 round Surefire mags |
Sights | Adjustable front and rear iron sights |
The AR-15 is a lightweight, intermediate cartridge magazine-fed, air cooled rifle with a rotating-lock bolt, actuated by direct impingement gas operation or long/short stroke piston operation. It has been produced in many different versions, including numerous semi-automatic and pre-ban selective fire variants. It is manufactured with extensive use of aluminum alloys and synthetic materials.
The AR-15 was first built by ArmaLite as a small arms rifle for the United States armed forces. Because of financial problems, ArmaLite sold the AR-15 design to Colt. After modifications (most notably the relocation of the charging handle from under the carrying handle like the AR-10 to the rear of the receiver), the new redesigned rifle was subsequently adopted as the M16 rifle.[7] Colt then started selling the semi-automatic version of the M16 rifle as the Colt AR-15 for civilian sales in 1963 and the term has been used to refer to semiautomatic-only versions of the rifle since then.[8] Although the name "AR-15" remains a Colt registered trademark, variants of the firearm are independently made, modified and sold under various names by multiple manufacturers. All Full Auto AR-15's were build before 1986 when the ban on newly manufacture machine guns was put in place. Before 1986 the AR-15 rifle could be legally converted to Full Auto. When Eugene Stoner first sold the rifle to the US military it was labeled as the Armalite Rifle model 15 or AR-15 for short. The AR-15 first saw combat in the beginning of the Vietnam conflict and was later renamed the XM-16 to keep the rifle from being confused with the semi automatic version.
History
The AR-15 is based on the 7.62 mm AR-10, designed by Eugene Stoner, Robert Fremont, and L. James Sullivan of the Fairchild Armalite corporation.[9] The AR-15 was developed as a lighter, 5.56 mm version of the AR-10. The "AR" in all ArmaLite pattern firearms simply stands for ArmaLite, and can be found on most of the company's firearms: AR-5 a .22 caliber rifle, the AR-7, another .22 caliber, the AR-17 shotgun, the AR-10 rifle, in addition to the AR-24 pistol.
ArmaLite sold its rights to the AR-10 and AR-15 to Colt in 1959. After a tour by Colt of the Far East, the first sale of AR-15s was made to Malaya on September 30, 1959, with Colt's manufacture of their first 300 AR-15s in December 1959.[10] Colt marketed the AR-15 rifle to various military services around the world, including the U.S. Navy, Air Force, Army, and Marine Corps. The AR-15 was eventually adopted by the United States military under the designation M16. Colt continued to use the AR-15 trademark for its semi-automatic variants (AR-15, AR-15A2) which were marketed to civilian and law-enforcement customers. The original AR-15 was a very lightweight weapon, weighing less than 6 pounds with empty magazine. Later heavy-barrel versions of the civilian AR-15 can weigh upwards of 8.5 lb.[11]
Today the AR-15 and its variations are manufactured by many companies and are popular among civilian shooters and law enforcement forces around the world due to their accuracy and modularity (for more history on the development and evolution of the AR-15 and derivatives see M16 rifle).
The trademark "AR15" or "AR-15" is registered to Colt Industries, which maintains that the term should only be used to refer to their products. Other AR-15 manufacturers make AR-15 clones marketed under separate designations, although colloquially these are sometimes referred to by the term AR-15.
Some notable features of the AR-15 include:
- Aircraft grade forged 7075-T6 aluminum receiver is lightweight, highly corrosion-resistant, and machinable.
- Modular design allows the use of numerous accessories such as after market sights, vertical forward grips, lighting systems, night vision devices, laser-targeting devices, muzzle brakes/flash hiders, sound suppressors, bipods, etc., and makes repair easier
- Straight-line stock design eliminates the fulcrum created by traditional bent stocks, reducing muzzle climb.
- Small caliber, accurate, lightweight, high-velocity round (.223/5.56x45mm)
- Easily adapted to fire numerous other rounds
- Front sight adjustable for elevation
- Rear sight adjustable for windage (most models) and elevation (some models)
- Wide array of optical aiming devices available in addition to or as replacements of iron sights
- Direct impingement gas system (as designed) with short or long stroke gas piston, or direct blowback operating systems available
- Synthetic pistol grip and butt stock that do not swell or splinter (regulated in some states)
- Various magazine capacity, ranging from 10 to 30-round or more
- Ergonomic design that makes the charging handle, selector switch (which also engages the safety), magazine release, and bolt catch assembly easy to access.
- 4 MOA Accuracy as a MILSPEC standard
Semi-automatic AR-15s for sale to civilians are internally different from the full automatic M16, although nearly identical in external appearance. The hammer and trigger mechanisms are of a different design. The bolt carrier and internal lower receiver of semi-automatic versions are milled differently, so that the firing mechanisms are not interchangeable. This was done to satisfy United States Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) requirements that civilian weapons may not be easily convertible to full-automatic. In the late 1970s and early 1980s, items such as the "Drop In Auto Sear" or "lightning-link," conversion to full automatic was very straightforward (sometimes requiring machining of the lower receiver with use of a mill and M16 Bolt Carrier Group).[12][13] Such modifications, unless using registered and transferable parts made prior to May 19, 1986, are illegal. (The Firearm Owners Protection Act in 1986 has redefined a machine gun to include individual components where a semi-automatic firearm can be converted to full-automatic based on a 1981 ATF ruling on machine gun parts.) Since 1993, The Bolt Carrier Groups used in AR-15 type rifles for civilians have employed additional measures to prevent modification to full auto. Colt AR-15's use a metal alloy wall separating the Fire Control group from the Sear, preventing use of such items.
Automatic variants have a three-position rotating selective fire switch, allowing the operator to select between three modes: safe, semi-automatic, and either automatic or three-round burst, depending on model. Civilian Colt AR-15 models do not have three-round burst or automatic settings; they can only be fired as a semi-automatic, and are therefore not selective fire weapons. In semi-automatic-only variants, the switch only functions to rotate between safe and fire. Some other manufacturers may mark their rifles with three-positions for collectors and re-enactors, though the guns will not fire in those modes. However weapons modified to full automatic using a lightning-link are capable of full automatic fire only—unless a special full automatic fire select mechanism and modified selector-switch is substituted.[12]
Operating mechanism
The main mechanism of operation for the rifle is known as direct gas impingement. Gas is tapped from the barrel as the bullet moves past a gas port located above the rifle's front sight base. The gas rushes into the port and down a gas tube, located above the barrel, which runs from the front sight base into the AR-15's upper receiver. Here, the gas tube protrudes into a "gas key" (bolt carrier key) which accepts the gas and funnels it into the bolt carrier.
The bolt and bolt carrier together form a piston, which is caused to expand as the cavity in the bolt carrier fills with high pressure gas. The bolt is locked into the barrel extension, so this expansion forces the bolt carrier backward a short distance in line with the stock of the rifle to first unlock the bolt. As the bolt carrier moves toward the butt of the gun, the bolt cam pin, riding in a slot on the bolt carrier, forces the bolt to turn and unlock from the barrel extension. (The gas system only serves to unlock the bolt once the projectile has exited the barrel). Once the bolt is fully unlocked it begins its rearward movement along with the bolt carrier. The bolt's rearward motion extracts the empty cartridge case from the chamber, and as soon as the neck of the case clears the barrel extension, the bolt's spring-loaded ejector forces it out the ejection port in the side of the upper receiver. The bolt is much heavier than the projectile, and along with the recoil-spring pressure inside the stock buffer-tube performs the cartridge ejection function and chambers the following cartridge.
Behind the bolt carrier is a plastic or metal buffer which rests in line with a return spring that pushes the bolt carrier back toward the chamber. A groove machined into the upper receiver traps the cam pin and prevents it and the bolt from rotating into a closed position. The bolt's locking lugs then push a fresh round from the magazine which is guided by feed ramps into the chamber. As the bolt's locking lugs move past the barrel extension, the cam pin is allowed to twist into a pocket milled into the upper receiver. This twisting action follows the groove cut into the carrier and forces the bolt to twist and "lock" into the barrel's unique extension.
Variants
The AR-15 rifle is available in a wide range of configurations from a large number of manufacturers. These configurations range from short carbine-length models with features such as adjustable length stocks and optical sights, to heavy barrel models.
Due to the rifle's modular design, one upper receiver can quickly and easily be substituted for another. There are many aftermarket upper receivers that incorporate barrels of different weights, lengths and calibers. Some available calibers for the AR-15 platform are the .223 Remington/5.56x45mm, .300 Blackout, .45 ACP, 5.7x28mm, 6.5 mm Grendel, 6.8 mm Remington SPC,[14] .50 Beowulf, .50 BMG, and .458 SOCOM.[15] It is not recommended to chamber the 5.56x45 NATO into a rifle designated .223 Remington, due to the increased chamber pressure in the 5.56mm cartridges; the two cartridges are similar, but not identical.
When installing a new complete upper receiver, particularly one designed to handle a different caliber of ammunition (i.e., other than .223 Remington or 5.56x45 mm NATO), some modification to the contents of the lower receiver may be required, depending on the particular conversion. For example, a conversion to 9 mm typically would involve the installation of a magazine well block (to accommodate a typical 9 mm magazine, such as Uzi or Colt SMG), replacing the .223 hammer with one designed for 9 mm ammunition, and depending on the original stock, replacing the buffer, action spring and stock spacer with those designed for the new 9 mm AR-15 configuration. The 9mm cartridge fires from an unlocked breech, or straight blow-back—rather than a locked breech, because the spring and bolt provide enough weight to allow this type of functioning. These guns do not utilize the direct gas impingement method of operation like the original.
Some AR-15's like the POF, LWRCI, H&K, Sturm Ruger, Sig Sauer, CMMG, and Adams Arms offerings replace the DGI (direct gas impingement) operating system with a short stroke/long stroke gas piston system. These guns usually have modified bolt carriers, gas keys, and gas blocks. When fired, DGI systems dump high pressure hot gas through the gas tube to the bolt carrier key and into the bolt carrier group. This can rapidly heat up the bolt carrier group and cause excessive fouling, one of the main complaints about the design. Gas piston operating systems alleviate these problems, but can be the cause of other issues such as carrier tilt, which can lead to increased bolt fractures.
Some manufacturers offer upper and lower receivers machined from a solid billet (block) of aluminum as opposed to an aluminum forging. With forgings typically having a comparatively higher strength to weight ratio than billet.
Upper receivers utilizing a monolithic rail system that combine a railed hand guard and upper receiver into one uninterrupted piece are made by companies like Colt's Manufacturing Company, Lewis Machine and Tool (LMT MRP), POF-USA, and VLTOR. This is done to provide a continuous uninterrupted rail section that runs along the top of the gun from the weapon's charging handle to the front sight/gas block. This rail section is used for the mounting of sights, laser aiming devices, night vision devices, and lighting systems.
A side charging upper receiver has been developed by LAR Grizzly. Blackwood Arms has also developed a side charging upper receiver.[16] The charging handle can be had in a left side, right side, or ambidextrous configuration. Since the charging handle is attached to the bolt carrier making it a reciprocating design, it can be utilized as a forward assist device as well.
Early models had a 1:14 rate of twist for the original 55 grain (3.6 g) bullets. This was changed to 1:12 when it was found that 1:14 was insufficient to stabilize a bullet when fired in cold weather. Most recent rifles have a 1:9 or 1:7 twist rate. There is much controversy and speculation as to how differing twist rates affect ballistics and terminal performance with varying loads, but heavier, longer projectiles tend to perform better with faster rifling rates.[17] Additionally, the various non .223 / 5.56 calibers have their own particular twist rate, such as 1:10, 1:11 and 1:12 for 6.8x43mm SPC, 1:10 for 7.62x39mm, 1:9 for the 6.5 Grendel and 1:8 for .300 Blackout.
Standard issue magazines are 20- or 30-round staggered-column magazines, traditional box magazines exist in 40- and 45-round capacities, and usable magazines have been constructed from a variety of materials including steel, aluminum, and high-impact plastics. Drum magazines with 90- and 100-round capacities exist, such as Beta C-Mags. Low-capacity magazines, usually of a 5- or 10-round capacity, are available to comply with some areas' legal restrictions, hunting, and because larger magazines can inhibit shooting from a benchrest. Surefire is now offering extended capacity magazines in 60- and 100-round capacity configurations. These are of a staggered column design, dubbed casket magazines due to their shape.
Muzzle devices
Most AR15 rifles have a barrel threaded in 1⁄2-28" threads to incorporate the use of a muzzle device such as a flash suppressor, sound suppressor or muzzle brake.[18] The initial design had three tines or prongs and was prone to breakage and getting entangled in vegetation. The design was later changed to close the end to avoid this and eventually on the A2 version of the rifle, the bottom port was closed to reduce muzzle climb and prevent dust from rising when the rifle was fired in the prone position.[19] For these reasons, the US Military declared this muzzle device a compensator; but it is more commonly known as the "GI" or "A2" flash suppressor.[20]
Some jurisdictions have banned or severely restrict usage of flash suppressors by law. In most of these areas, AR-15 shooters have installed muzzle brakes or compensators on their rifles.
The threaded barrel allows sound suppressors with the same thread pattern to be installed directly to the barrel, however this can result in complications such as being unable to remove the suppressor from the barrel.[21] A number of suppressor manufacturers have turned to designing "direct-connect" sound suppressors which can be installed over an existing flash suppressor as opposed to using the barrel's threads.[21]
Legal status of civilian ownership
Australia
AR-15 rifles, like all semi-automatic rifles, are subject to strong restrictions of ownership in all states and territories in Australia. The only means of legally owning an AR-15-type rifle in Australia today beyond law enforcement is to have a Category D Firearms License (e.g. a professional animal culler), to have a Firearms Collector's License and the firearm deactivated (with the barrel plugged up and the action welded shut), or converted to blank fire if one is a member of a military re-enactment organization.
Restrictions on semi-automatic rifles were introduced in 1996 in response to the Port Arthur massacre – one of the firearms used was an AR-15. Previously, AR-15 rifles were legal to own in Queensland and Tasmania.
As a consequence to stricter legal requirements to semi-automatic firearms; AR-15 type rifles became too expensive for television and film production with the requirement to destroy or export imported semi-automatic rifles after use. Warwick Firearms & Militaria[22] , a Melbourne prop maker, self-manufactures blank firing AR-15-type, WFM4 rifles locally with approximately three dozen having been sold.[23]
Austria
In Austria, semi-automatic centerfire rifles have to be classified as sporting or hunting firearms in order to obtain civilian-legal status. After this classification, they are considered "category B" firearms, which means that holders of gun licenses may own them. These licenses are may-issue items if the applicant specifies a valid reason (self-defense at home for example is considered valid by law in any case), passes a psychological test and attends a gun-basics course. Currently, three AR-15 manufacturers, all producing in Germany have had versions of their AR15 models successfully classified as class B weapons. These Austrian versions differ slightly from the original design in order to ensure that no military full-auto trigger, bolt and barrel may be installed. Additionally, bayonet lugs and flash hiders are prohibited on semi-automatic rifles while Muzzle brakes and compensators are legal. There is no minimum length for barrels, therefore even barrel lengths as short as 7.5" are possible.[citation needed]
Canada
The Government of Canada classifies the AR-15 (and its variants) as a restricted firearm. For anyone wanting to lawfully own an AR-15, they must obtain a Possession and Acquisition License (PAL) valid for restricted firearms (RPAL) and then each acquisition of a restricted class firearm is subject to approval by the Chief Firearms Officer (CFO) of the would-be buyer's province of residence.[24][25] With the introduction of strict gun control measures by former Prime Minister Jean Chretien (Bill C-68), the AR-15 had originally been intended to be classified as a prohibited firearm, making it impossible to privately own one. However, due to the presence of nationwide Service Rifle target shooting competitions, the AR-15 was granted a sporting exception.
As with all Restricted firearms (including most pistols, some shotguns, and some rifles) AR-15s are allowed to be fired only at certified firing ranges since the CFOs of all provinces and territories have agreed to issue ATTs (Authority To Transport) for these guns only to certified ranges. Since owners cannot legally take these guns anywhere else that shooting is allowed, they can in effect only shoot them on certain ranges. In order to legally own and transport a Restricted firearm, the firearm must be registered with the Royal Canadian Mounted Police Canadian Firearms Program and must apply for an Authorization to Transport (or ATT) from the Chief Firearms Officer (CFO) for their province or territory. Additionally, the firearm must be unloaded, deactivated by a trigger or action lock, and be in a locked, opaque "hard to break into" (Which is not legally defined within the Canadian firearms act or the CCC.) container during transport.[26]
The issuance of ATTs varies considerably from province to province, and is generally reflective of a particular province's political and social levels of acceptance toward gun ownership. In Ontario the "policy" of the CFO (Currently Chris Wyatt) is to obtain an ATT for restricted firearms is to become a member of a range. However policy is not law and when challenged they have no choice but to either issue the ATT requested or do a formal refusal which can be challenged (for free) in court since they must abide by the law. It is not legal for them to refuse on the phone since the only acceptable method for that is in writing as per FA s.72(1)[27]
However in Alberta, where firearms ownership is widely accepted, generally a single ATT is promptly issued that allows citizens to transport firearms to border crossings, gunsmiths, and shooting ranges. Firearms transfers in provinces such as Ontario, Quebec and some others can take up to 6 months to process.[citation needed]
Finland
In Finland, possession of semi-automatic rifles, including the AR-15, is legal, provided that the rifle's owner acquires a permit for owning one. A license is required for each individual firearm and there needs to be a specific reason for ownership such as participation in the shooting sports and hunting. In Finland maximum magazine capacity in hunting is 3 rounds. But in addition you can have 1 round chambered which brings your direct ammo capacity up to 4 rounds. There is no magazine capacity limit on guns for target shooting.
Germany
For German hunters, their semi-automatic firearm's magazine must be modified in such a way that its maximum capacity is only 2 rounds (excluding handguns), meaning that when hunting game animals only 3 shots in total can be fired (as one additional round is loaded in the chamber) without reloading. This rule is stated in German hunting law and not in German gun law. The possession of ammunition without a special permission (see above) is prohibited by the German weapon's law.
France
In France, any firearms using military calibers (9mm, 5.56 NATO, 7.62x39, 7.62 NATO, .45 ACP, .50 BMG, .50 AE.) are authorized as category 1 weapons. While fully automatic category one weapons are highly restricted, semi-automatic ones are legal for civilian possession. A hunting or sports shooting license is required to possess and purchase any firearm in France.
Ireland
In Ireland, semi-automatic AR-15s are legal. Features such as pistol grips, adjustable stocks, certain flash hiders, or magazines holding more than 10 rounds would make it a restricted firearm. A restricted firearms license requires good reason and is granted by the local chief superintendent. More restrictions apply such as uprated storage and alarms.[28]
Italy
In Italy, the AR-15 rifle belongs to B7 class and can be owned by civilians, provided it is incapable of fully automatic fire. Like every other gun, it must be registered and to purchase it citizens must have a valid license, which is granted to every person who qualifies. The rifles are chambered in .223 or 5.56x45 (M193 ball). Only NATO specifications ammo in 5.56 mm is not allowed for civilian use. Due to Italian legal catalog of rifles, this type can be considered for hunting use or sports use (depending of classifications). If the rifle is classified for hunting use is possible to own unlimited AR-15s, while the rifle is classified for sporting use is possible to own only 6 guns with the same "sporting" classifications.
New Zealand
The AR-15 rifle is treated like any other semi-automatic rifle. They are legal to own by individuals holding a firearms license however specific features (folding stock, pistol grip, magazines holding more than 7 rounds, etc.) will require it to be registered as a Military-Style Semi-Automatic (MSSA) requiring an 'E Category' endorsement on their license.
Sweden
The AR-15, like all other semi-automatic rifles, is legal for individuals who need one for competitive use (IPSC rifle or 3-gun matches). A valid competition license is required, and all weapons are registered with the police. There are no banned "assault weapon" features or parts. However, the AR-15 is not allowed for hunting use.
South Africa
The AR-15 like any other semi-automatic long arm in South Africa, is legal for anyone who holds any of the following licenses:
- Licence to possess firearm for dedicated hunting and dedicated sports-shooting
- Licence to possess firearm for business purposes
- Licence to possess restricted firearm for self-defence
While not prohibited common citizens can only own semi-automatic AR-15s if they are members of a hunting or target club, and possess dedicated sport person or dedicated hunter status granted by organisations accredited by the SAPS (South African Police Service).[29][30] Other licenses allowing the possession of semi-automatic rifles are only available to people who require their use in the conduct of their business (e.g. security personnel), and citizens who can convincingly prove to the Registrar that non-restricted firearms are not sufficient to provide protection. The latter requires a specific motivation for the need of a restricted firearm for self-defence[29] and have been granted to rhino farmers.[31][32][33]
United Kingdom
As with all semi-automatic, centerfire rifles, AR-15s are classed as a Section 5 weapon (Prohibited), i.e., a person must provide an exceptional reason and gain permission from the Home Secretary, making ownership all but impossible for a private citizen. However, centerfire AR-15s in a manually operated straight pull configuration or semi-automatic AR-15s that are chambered to fire a .22 rimfire cartridge are legal and can be held on a standard Section 1 Firearms Certificate. There are no restrictions on 'assault weapon features' in the UK, and no restrictions on magazine capacity. There are a number of UK manufacturers of "straight-pull" AR-15 variants. Southern Gun Company has tried to introduce a 9mm "self-ejecting" variant for gallery rifle shooting nicknamed the "Unicorn" but, despite numerous units being sold on the understanding that the rifle was a compliant Section 1 firearm, the rifles were seized and subjected to stringent testing by the UK Forensic Science Service (FSS). A small number of pre-production models were found to be non-compliant with section 1 status. However, later models were deemed Section 1 compliant and were returned to their owners.[citation needed]
United States
There are no federal restrictions on the ownership of AR-15 rifles in the United States. During the period 1994–2004 variants with certain features such as collapsible stocks, flash suppressors, and bayonet lugs were prohibited for sales to civilians by the Violent Crime Control and Law Enforcement Act of 1994, with the included Federal Assault Weapons Ban. Included in this was a restriction on the pistol grip that protrudes beneath the stock, which was considered an accessory feature under the ban and was also subject to restrictions. Some rifles were manufactured with a grip not described under the Ban installed in its place. Those AR-15s that were manufactured with those features, as well as the accompanying full capacity magazines, were stamped "Restricted Military/Government/Law Enforcement/Export Only". The restrictions only applied to guns manufactured after the ban took effect. It was legal to own, sell, or buy any gun built before 1994. Hundreds of thousands of pre-ban ARs were sold during the ban as well as new guns redesigned to be legal.
Since the expiration of the Federal AWB in September 2004,[34] these features became legal in most states.[35] Since the expiration of the ban, the manufacture and sale of then-restricted rifles has resumed completely.
Six states; Massachusetts, New York, New Jersey, California, Maryland, and Connecticut, heavily regulate possession of AR-15 type rifles either by the restriction of certain features or outright bans of certain manufacturers' models. California residents may own certain AR-15 type rifles, but they are required to have a fixed magazine not exceeding 10 rounds. Massachusetts and New Jersey have essentially continued following the 1994 Assault Weapons Ban criteria on numerous semiautomatic rifles. New York, Maryland and Connecticut enacted a ban on sales of AR-15 (and other types of firearms) in response to the December 2012 Sandy Hook Massacre. These various state legislation have been heavily criticized by many gun owners, pro-gun organizations and even some Sheriff's Departments.
Under U.S. firearms laws, the lower receiver of the AR-15 is considered a firearm and subject to purchasing restrictions. (This is not universally the case with rifles. On some other rifles, such as the FN FAL, Heckler & Koch 91, 93, (G-3, G-33), 94, MP-5 or SP-89 (plus clones), the lower receiver is the serial-numbered part, and thus the firearm.) The AR-15 upper receiver assembly is considered a part, and may be purchased and mail-ordered in most locations. This is a desirable feature for enthusiasts, who can purchase a number of upper receivers (often in different calibers and barrel lengths) and interchange them with the same lower receiver.
Adding a shoulder stock to an AR-15 with a barrel shorter than 16" would constitute constructing a Short-Barreled Rifle (SBR) under NFA rules – subject to a $200 tax stamp. The receiver, or serial-numbered part is still considered a firearm, but a receiver has unique status assigned by the Gun Control Act of 1968 as amended, and ATF regulations or rulings. ATF ruling 07-07-2009 illustrates a receiver's unique legal status even if the receiver can only be made into a rifle.[36] Under the United States v. Thompson-Center Arms Company Supreme Court ruling, an individual can possess parts for both the rifle and pistol so long as they are not assembled improperly.[37] This ruling has been further clarified by the ATF Director in a ruling (ATF Ruling 2011-4[38]) dated July 25, 2011 which restates most of the findings in the Thompson case.
Following the 1992 ruling, the ATF claimed that the finding in United States v. Thompson-Center Arms Company only applies to products of Thompson Contender, and not to any other companies' products.[39] This has changed under ATF ruling 2011–4 which states
A firearm, as defined by the National Firearms Act (NFA), 26 U.S.C. 5845(a)(3), is made when unassembled parts are placed in close proximity in such a way that they: (a) serve no useful purpose other than to make a rifle having a barrel or barrels of less than 16 inches in length; or (b) convert a complete weapon into such an NFA firearm.[40] A firearm, as defined by 26 U.S.C. 5845(a)(3) and (a)(4), is not made when parts within a kit that were originally designed to be configured as both a pistol and a rifle are assembled or re-assembled in a configuration not regulated under the NFA (e.g., as a pistol, or a rifle with a barrel or barrels of 16 inches or more in length).[40] A firearm, as defined by 26 U.S.C. 5845(a)(3) and (a)(4), is not made when a pistol is attached to a part or parts designed to convert the pistol into a rifle with a barrel or barrels of 16 inches or more in length, and the parts are later unassembled in a configuration not regulated under the NFA (e.g., as a pistol).[40] A firearm, as defined by 26 U.S.C. 5845(a)(4), is made when a handgun or other weapon with an overall length of less than 26 inches, or a barrel or barrels of less than 16 inches in length, is assembled or produced from a weapon originally assembled or produced only as a rifle.[40] Such a weapon would not be a "pistol" because the weapon was not originally designed, made, and intended to fire a projectile by one hand.
Furthermore, adding a forward pistol grip to an AR-15 designated as a pistol constitutes manufacture of an AOW (any other weapon).[41] Both of these actions require an approved "Form 1" and payment of a $200 tax prior to the actual construction of the item. Current wait times for approval average 5–8 months during which time no modifications or construction may be done.
As of 2012, there are an estimated 2.5-3.7 million rifles from the AR-15 family in civilian use in the United States.[42] They are favored for target shooting, hunting, and personal protection, and have become the most popular rifle in America.[43]
Individual states
California
The Roberti-Roos Assault Weapons Control Act of 1989 banned Colt AR-15 rifles by name in the State of California. California's assault weapons ban following the Supreme Court of California's 2000 decision in Kasler v. Lockyer went further and banned AR-15s made by other manufacturers by name.[44] AR-15-style rifles that are not named specifically by the Roberti-Roos or other restricted lists can be purchased in the state with some major modifications. Since these are not on the various lists of prohibited firearms, their lower receivers (the part that is legally the firearm) are referred to as "Off List Lowers"(OLL). These OLLs are very common in California, and at least several hundred thousand of them have been sold in the state since the ban went into effect.
Malfunction
With the plethora of manufacturers of complete weapons and aftermarket barrels, there is a potential hazard associated with chamber specifications. Both civilian (SAAMI) specification .223 Remington and 5.56 mm NATO are available. Though the external dimensions of the two cases are the same and both chambers typically accept both types of ammunition, the firing of military specification ammunition in civilian specification chambers can produce chamber pressures greater than the barrel is designed to handle. Internally the 5.56x45mm case wall is thicker, and the round itself is typically loaded to produce higher pressure than the .223. The most common result of firing military 5.56x45mm ammunition in a .223 Remington chamber is that the primer can be forced out of the case by chamber pressure, often resulting in the primer becoming lodged somewhere in the action of the rifle, and disassembly of the rifle is often necessary to remove the jammed primer.[45]
A few AR-15 manufacturers incorporate the use of a hybrid chamber specification known as the Wylde chamber. Designed by and named after Bill Wylde of Greenup, IL, this chambering was designed to accurately shoot the military ball ammo of the day while still feeding reliably. Coincidentally, it shoots the longer 80 gr bullets commonly used in the sport of Highpower Rifle Competition very well and is one of the preferred chambers for that use. While the Wylde chamber allows for optimal seating depth of 80 grain bullets over .223 Remington and 5.56 NATO, it is capable of accepting both ammunition types. The Wylde chamber is used by many manufacturers who sell "National Match" configuration AR-15 rifle, barrels, and upper receivers. The type of chamber, manufacturer, and rifling twist in inches is typically found stamped into the barrel in front of the front sight assembly.
An additional point of concern in the design is the inertial firing pin. A lightweight firing pin rides in a channel inside the bolt unrestrained. When the bolt locks forward during loading, the firing pin typically rides forward and impacts the primer of the chambered round. In military specification ammunition and quality civilian ammunition, this is not normally enough to fire the round and only leaves a small "ding" on the primer. With more sensitive primers or improperly seated primers, this can cause a slamfire during loading.[46] Another type of malfunction, hammer follow, is also a potential problem for AR platform weapons.
AR-15 and variant manufacturers
U.S.
- Alexander Arms
- American Spirit Arms
- ArmaLite
- Barrett Firearms Manufacturing
- Black Rain Ordnance
- Bushmaster Firearms International
- Charles Daly firearms
- Colt's Manufacturing Company
- DPMS Panther Arms
- High Standard Manufacturing Company
- Knight's Armament Company
- Les Baer
- Lewis Machine and Tool Company
- Land Warfare Resources Corporation International (LWRCI)
- Magpul Industries
- Olympic Arms
- Para-Ordnance (Para-USA)
- Remington Arms
- Rock River Arms
- Ruger
- Sabre Defence/Manroy USA
- Sig Sauer
- Smith & Wesson
- Stag Arms
- Sturm, Ruger
- Wilson Combat
- Z-M Weapons
International
- Colt Canada (previously Diemaco)
- Ferfrans
- Heckler & Koch
- Norinco
- Sig Sauer
- United Defense Manufacturing Corporation
- Schmeisser
Calibers
Pistol cartridges
- Metric
- Imperial
Rifle cartridges
- Metric
- Imperial
- .177
- .17 Remington
- .17-223
- .17 HMR
- .17 HM2
- .204 Ruger
- .20 Tactical
- .20 Practical
- .20 VarTarg
- .221 Fireball
- .22 LR
- .22 WMR
- .222 Remington
- .222 Remington Magnum
- .223 Remington
- .223 Remington Ackley Improved
- 223 WSSM
- 243 WSSM
- .25 Winchester Super Short Magnum
- .25×45mm
- .30 Remington AR
- .300 Whisper
- .30 Herrett Rimless Tactical
- 300 AAC Blackout (7.62×35mm)
- .30 RAR
- .300 OSSM
- .30 Carbine
- .35 Gremlin
- .358 WSSM
- .450 Bushmaster
- .458 SOCOM
- .50 Beowulf
Shotgun shells
In addition, the AR-15 lower receiver can be used as a trigger mechanism for single shot or side-fed upper receiver platforms that shoot in a variety of larger calibers, including .50 BMG and crossbow bolts.
See also
References
- ^ "M-16 Rifle also called AR-15". Retrieved 2008-07-16.
- ^ "Infantry Weapons Used in Borneo". Archived from the original on 7 August 2008. Retrieved 2008-07-16.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ "M-16/AR-15". Archived from the original on August 20, 2008. Retrieved 2008-07-16.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ "Armalite AR-15". Retrieved 2008-07-16.
- ^ "ARMALITE AR-15". Retrieved 2008-07-16.
- ^ "Colt Model AR6721". Retrieved 2008-07-16.
- ^ Peter G. Kokalis Retro AR-15. nodakspud.com
- ^ Blue Book Publications – COLT'S MANUFACTURING COMPANY, LLC AR-15, Pre-Ban, 1963–1989 Mfg. w/Green Label Box. Store.bluebookinc.com. Retrieved on 2011-09-27.
- ^ "A Historical Review of Armalite" (PDF). ArmaLite, Inc. 1999-04-23. Retrieved 2008-07-16.
- ^ p.96 Dockery, Kevin Future Weapons Berkley Books, 2007
- ^ "AR-15 Carbine". Archived from the original on 31 July 2008. Retrieved 2008-07-16.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ a b "Lightning Link Page". Retrieved 2009-05-10.
- ^ "Drop in Auto-Sear Page". Retrieved 2009-05-10.
- ^ U.S. Military Small Arms Ammunition Failures and Solutions, GK Roberts, NDIA Dallas, TX, 21 May 2008 http://www.dtic.mil/ndia/2008Intl/Roberts.pdf
- ^ Evolution of an AR | Gear | Guns & Ammo. Archives.gunsandammo.com (2011-08-29). Retrieved on 2011-09-27.
- ^ "Crosshill Technologies XSR-15 Light Weight Side Charging AR-15" on YouTube
- ^ Miller, Don. How Good Are Simple Rules For Estimating Rifling Twist, Precision Shooting – June 2009
- ^ Sweeney, Patrick (2012). Gun Digest Book of the AR-15. Iola, Wisconsin: Gun Digest Books. p. 67. ISBN 978-1-4402-2868-1.
{{cite book}}
:|access-date=
requires|url=
(help) - ^ Wieland, Terry (22 November 2011). Gun Digest Book of Classic American Combat Rifles. Iola, Wisconsin: Krause Publications. p. 100. ISBN 978-1-4402-3017-2.
- ^ Steve Crawford (2003). Twenty First Century Small Arms: The World's Great Infantry Weapons. Zenith Imprint. pp. 85–86. ISBN 978-0-7603-1503-3. Retrieved 28 May 2013.
- ^ a b Walker, Robert E. (2012). Cartridges and Firearm Identification. Florence, KY: CRC Press. p. 295. ISBN 978-1-4665-0206-2.
- ^ Matheson, Mick (14 Aug 2012). "Aussie-made auto: bolt-action to follow?". Sporting Shooter Magazine. Retrieved 10 May 2013.
- ^ http://www.smh.com.au/national/australianmade-but-only-for-gmen-and-the-movies-20130123-2d7j9.html
- ^ Firearms Safety Training, Canadian Firearms Centre (CFC)
- ^ List of Restricted and Prohibited Firearms, Canadian Firearms Centre (CFC)
- ^ "RCMP Firearms Program Regulations on Transporting Firearms". Rcmp-grc.gc.ca. 2007-04-20. Retrieved 2009-11-28.
- ^ https://nfa.ca/fr/resource-items/document-refusal-and-revocation
- ^ http://www.garda.ie/Documents/User/commissioners%20guidelines%20%28as%20amended%2022nd%20oct%29%20in%20relation%20to%20firearms%20licensing%5B1%5D.pdf Garda commissioners guidelines
- ^ a b http://www.info.gov.za/view/DownloadFileAction?id=68229
- ^ http://www.saga.org.za/Associations.htm
- ^ http://www.bdlive.co.za/articles/2011/09/23/semi-automatic-arms-to-fight-rhino-poachers
- ^ http://www.timeslive.co.za/scitech/2011/09/22/police-helping-arm-rhino-owners
- ^ http://www.bedfordviewrag.co.za/news.php?extend.335.8
- ^ "ATF Online — Firearms FAQs (section O, question 1)". ATF. 2006-07-06. Retrieved 2007-01-23. [dead link ]
- ^ "Everything you need to know about the assault weapons ban". Washington Post. 2012-12-17. Retrieved 2014-08-14.
- ^ "ATF ruling 07-07-2009" (PDF) (Press release). 2009.
- ^ TC V. U.S. 91–164. Caselaw.lp.findlaw.com. Retrieved on 2011-09-27.
- ^ "ATF Ruling 2011-4 PDF File" (PDF).
- ^ FFL Newsletter: Federal Firearms Licensees Information Service Provided by the Department of the Treasury, Bureau of Alcohol, Tobacco, and Firearms. Washington, D.C.: Department of the Treasury, Bureau of Alcohol, Tobacco, and Firearms. 1992. p. 9.
- ^ a b c d Melson, Kenneth E. "Pistols Configured from Rifles; Rifles Configured from Pistols ATF Rul. 2011-4" (pdf). Washington, D.C.: BATF. Retrieved 28 May 2013.
- ^ "ATF FAQ: Is it legal to attach a vertical fore grip to a handgun?".
- ^ "How Many Assault Weapons Are There in America?".
- ^ "Not Quite All "The Facts" About the AR-15".
- ^ Introduction of "Assault Weapons Identification Guide". California Attorney General. 3rd edition. November 2001. Retrieved 1 January 2012.
- ^ "ArmaLite, Inc. Technical Note – 5.56 NATO vs SAAMI .223 Chambers". ArmaLite, Inc. 2002-12-04. Archived from the original on 2006-12-17. Retrieved 2007-01-23.
- ^ "ArmaLite, Inc. Technical Note — Prevention of Slamfires" (PDF). ArmaLite, Inc. 1998-12-26. Retrieved 2009-02-19.
Bibliography
- Stevens, R. Blake and Edward C. Ezell. The Black Rifle M16 Retrospective. Enhanced second printing. Cobourg, Ontario, Canada: Collector Grade Publications Incorporated, 1994. ISBN 0-88935-115-5.
- Bartocci, Christopher R. Black Rifle II The M16 Into the 21st Century. Cobourg, Ontario, Canada: Collector Grade Publications Incorporated, 2004. ISBN 0-88935-348-4.