Jump to content

Self-propagating high-temperature synthesis

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Yx007yx007 (talk | contribs) at 23:25, 11 November 2014 (→Examples). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Self-propagating high-temperature synthesis (SHS) is a method for producing inorganic compounds by exothermic reactions, usually involving salts. A variant of this method is known as solid state metathesis (SSM). Since the process occurs at high temperatures, the method is ideally suited for the production of refractory materials with unusual properties, for example: powders, metallic alloys, or ceramics with high purity, corrosion–resistance at high–temperature or super-hardnessity.

The modern SHS process was reported and patented in 1971,[1][2] although some SHS-like processes were known previously.

Methodology

In its usual format, SHS is conducted starting from finely powdered reactants that are intimately mixed. In some cases, the reagents are finely powdered whereas in other cases, they are sintered to minimize their surface area and prevent uninitiated exothermic reactions, which can be dangerous.[3] The synthesis is initiated by point-heating of a small part (usually the top) of the sample. Once started, a wave of exothermic reaction sweeps through the remaining material. SHS has also been conducted with thin films, liquids, gases, powder–liquid systems, gas suspensions, layered systems, gas-gas systems, and others. Reactions have been conducted in a vacuum and under both inert or reactive gases. The temperature of the reaction can be moderated by the addition of inert salt that absorbs heat in the process of melting or evaporation, such as sodium chloride.

Examples

The reaction of alkali metal chalcogenides (S, Se, Te) and pnictides (N, P, As) with other metal halides produce the corresponding metal chalcogenides and pnictides.[4] The synthesis of gallium nitride from gallium triiodide and lithium nitride is illustrative:

GaI3 + Li3N → GaN + 3 LiI

The process is so exothermic (ΔH = -515 kJ/mol) that the LiI evaporates, leaving a residue of GaN. With GaCl3 in place of GaI3, the reaction is so exothermic that the product GaN decomposes. Thus, the selection of the metal halide affects the success of the method.

Other compounds prepared by this method include metal dichalcogenides such as MoS2. The reaction is conducted in a stainless steel reactor with excess Na2S.[3]

Ti3SiC2/TiC Composites were also prepared by SHS in an artificial high-gravity environment, with elemental powders of Ti, Si , and carbon black.[5]

References

  1. ^ "Self-propagated high-temperature synthesis of refractory inorganic compounds", A.G. Merzhanov, I.P. Borovinskaya. Doklady Akademii Nauk SSSR, Vol. 204, N 2, pp. 366-369, May, 1972
  2. ^ USSR Patent No. 255221, Byull. Izobr. No. 10
  3. ^ a b Philippe R. Bonneau, John B. Wiley, Richard B. Kaner "Metathetical Precursor Route to Molybdenum Disulfide" Inorganic Syntheses 1995, vol. 30, pp. 33–37. doi:10.1002/9780470132616.ch8
  4. ^ Richard G. Blair, Richard B. Kaner "Solid-State Metathesis Materials Synthesis" http://www.sigmaaldrich.com/sigma-aldrich/technical-documents/articles/chemfiles/solid-state-metathesis.html
  5. ^ Yin, Xi; Chen, Kexin; Zhou, Heping; Ning, Xiaoshan. "Combustion Synthesis of Ti3SiC2/TiC Composites from Elemental Powders under High-Gravity Conditions". Journal of the American Ceramic Society. doi:10.1111/j.1551-2916.2010.03714.x.
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Self-propagating_high-temperature_synthesis&oldid=633450896"