Jump to content

Klaus-Jürgen Bathe

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 198.177.146.250 (talk) at 15:46, 2 January 2015 (→Books). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Klaus-Jürgen Bathe
Klaus-Jürgen Bathe
Born (1943-05-26) May 26, 1943 (age 81)
Berlin, Germany
Nationality German
Alma materUniversity of Cape Town
University of Calgary
University of California, Berkeley
Known forFinite element method
Subspace iteration method
Bathe method
ADINA software
Scientific career
FieldsComputational mechanics
Finite element method
InstitutionsMassachusetts Institute of Technology
Doctoral advisorEdward L. Wilson

Klaus-Jürgen Bathe is a Professor of Mechanical Engineering at Massachusetts Institute of Technology, and founder of ADINA R & D, who specializes in computational mechanics.[1] Bathe is considered to be one of the pioneers in the field of finite element analysis and its applications.[2]

Early life and education

Born in Berlin, Bathe had his high school education at Oldenburg in Federal Republic of Germany. He then went to South Africa to earn his graduate degree in Civil Engineering and Engineering Mechanics from the University of Cape Town in 1967. Bathe received his M.Sc. degree in Civil Engineering from University of Calgary, Canada in 1969. Then, he received his Ph.D. in Civil Engineering from University of California, Berkeley in 1971.[3] His thesis was on numerical solution of large eigenvalue problems, where he developed the subspace iteration method.

Career

During his time as a post-doctoral fellow (1972–1974) at UC Berkeley, Bathe et al. developed the finite element programs SAP IV and NONSAP, which have been used by thousands of individuals and organizations in research and practice and had a major impact in advancing the finite element method. In 1974 he started the development of the ADINA system. Soon after, he joined the department of mechanical engineering at MIT.

In 1986, he founded ADINA R&D, Inc.[4]

Major contributions

Bathe has made fundamental contributions in the finite element analysis of structures, heat transfer, field problems, CFD, and fluid-structure interactions. These contributions are widely used in commercial software codes. Specifically, the following contributions for reliable, accurate and efficient finite element analyses are widely employed: [5] [6]

  • Formulation of shell finite elements (the MITC shell elements).
  • Formulations of large deformations of solids (the Total and Updated Lagrangian formulations).
  • Solution techniques for large eigenvalue problems (the subspace iteration method).
  • Solution techniques for contact problems (the constraint-function method).
  • Time integration schemes for the dynamic analysis of structures and fluid-structure interactions (the Bathe method).
  • Schemes for fully-coupled fluid-structure interactions and multi-physics problems.
  • Mathematical analysis of finite element schemes.
  • The book “Finite Element Procedures” used as a standard reference text in academia and industry.

Bathe is widely recognized to bridge the worlds of academia and industry in computational mechanics. [7]

Honors and awards

Bathe has received many honorary doctorates from institutions around the world: Slovak Academy of Sciences and Technical University of Zilina, Slovakia; Technical University of Darmstadt, Germany; Technical University of Rzeszow, Poland; Universidad Politécnica de Madrid, Spain; University of Bucharest, Romania; University of Miskolc, Hungary; University of Buenos Aires, Argentina; and University of Cape Town, South Africa. [1] [7]

Bathe has been listed as an ISI Highly Cited Author in Engineering by the ISI Web of Knowledge, Thomson Scientific Company.[8]

Editorial activities

Bathe currently serves as the Co-Editor of the Journal of Computers & Structures.[9] He is also the editor of the Springer's book series on Computational Fluid and Solid Mechanics.[10] He has organized the twelve bi-yearly conferences “Nonlinear Finite Element Analysis and ADINA”, at M.I.T., 1977–1999, and since 2001, the bi-yearly M.I.T. Conferences on Computational Fluid and Solid Mechanics[11]

Books

  • K.J. Bathe and E.L. Wilson, "Numerical Methods in Finite Element Analysis", Prentice-Hall, 1976.
  • K.J. Bathe, "Finite Element Procedures in Engineering Analysis", Prentice-Hall, 1982.
  • K.J. Bathe, "Finite Element Procedures", 2nd Edition, Watertown, MA: Klaus-Jürgen Bathe, 2014
  • D. Chapelle and K.J. Bathe, "The Finite Element Analysis of Shells – Fundamentals", Springer, 2003; 2nd edition, Springer, 2011.
  • M. Kojic and K.J. Bathe, "Inelastic Analysis of Solids and Structures", Springer, 2005.
  • K.J. Bathe, "To Enrich Life", Amazon.com, 2007.
  • M.L. Bucalem, K.J. Bathe, "The Mechanics of Solids and Structures – Hierarchical Modeling and the Finite Element Solution", Springer, 2011.

Online Courses on Finite Element Methods

  • MIT video lectures: Finite Element Procedures for Solids and Structures - Linear and Nonlinear Analysis [12]
  • MIT course on Finite Element Analysis of Solids and Fluids I [13]
  • MIT course on Finite Element Analysis of Solids and Fluids II [14]

References

  1. ^ a b "K.-J. Bathe at Massachusetts Institute of Technology".
  2. ^ Anwar Bég, O. (2003). Giants of Engineering Science. Troubador Publishing Ltd. ISBN 978-1-899293-52-0.
  3. ^ Klaus-Jürgen Bathe (2008). To Enrich Life. Klaus-Jürgen Bathe. ISBN 0979004926.
  4. ^ "ADINA Finite Element Analysis Software". adina.com.
  5. ^ J.W. Tedesco and J. Walczak, Preface, Computers & Structures, 81: 455-462, 2003
  6. ^ Klaus-Jürgen Bathe (2014). Finite element Procedures (2nd ed.). Klaus-Jürgen Bathe. ISBN 978-0-9790049-2-6.
  7. ^ a b "Bridging the world of academia and industry". University of Cape Town News.
  8. ^ ISI Highly Cited Author - Klaus-Jürgen Bathe
  9. ^ "K.-J. Bathe Co-Editor of Journal of Computers & Structures". Retrieved 2009-10-16.
  10. ^ "K. J. Bathe Editor of the Springer's book series on Computational Fluid and Solid Mechanics". Retrieved 2009-10-19.
  11. ^ "Sixth MIT Conference on Computational Fluid and Solid Mechanics". Retrieved 2011-11-03.
  12. ^ "MIT video lectures: Finite Element Procedures for Solids and Structures - Linear and Nonlinear Analysis".
  13. ^ "MIT course on Finite Element Analysis of Solids and Fluids I".
  14. ^ "MIT course on Finite Element Analysis of Solids and Fluids II".

Template:Persondata

Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Klaus-Jürgen_Bathe&oldid=640665465"