User:Kimberlykha/sandbox
Mucoadhesion
Bioadhesion is the mechanism by which two biological materials are held together by interfacial forces. When relating this mechanism to the pharmaceutical sciences, mucoadhesion describes the attractive forces between a biological material and mucus or mucus membrane.[1] Mucus membranes adhere to epithelial surfaces such as the gastrointestinal tract (GI-tract), the vagina, the lung, the eye, etc. They are generally hydrophilic as they contain many hydrogen macromolecules due to the large amount of water (approximately 95%) within its composition. However, mucin also contains glycoproteins that enable the formation of a gel-like substance.[1] Understanding the hydrophilic bonding and adhesion mechanisms of mucus to biological material is of utmost importance in order to produce the most efficient applications. For example, in drug delivery systems, the mucus layer must be penetrated in order to effectively transport micro- or nanosized drug particles into the body.[2]
Mucoadhesive/mucosa interaction
Mucoadhesion involves several types of bonding mechanisms, and it is the interaction between each process that allows for the adhesive process. The major categories are wetting theory, adsorption theory, diffusion theory, electronic theory, and fracture theory.[3] Specific processes include mechanical interlocking, electrostatic, diffusion interpenetration, adsorption and fracture processes.[4]
Bonding mechanisms
Wetting theory: Wetting is the oldest and most prevalent theory of adhesion. The adhesive components in a liquid solution anchor themselves in irregularities on the substrate and eventually harden, providing sites on which to adhere.[4] Surface tension effects restrict the movement of the adhesive along the surface of the substrate, and is related to the thermodynamic work of adhesion by Dupre's Equation.[4] Measuring the affinity of the adhesive for the substrate is performed by determining the contact angle. Contact angles closer to zero indicate a more wettable interaction, and those interaction have a greater spreadability.[3]
Adsorption theory: Adsorption is another widely accepted theory, where adhesion between the substrate and adhesive is due to primary and secondary bonding.[3] The primary bonds are due to chemisorption, and result in permanent ionic, covalent, and metallic bonding.[5] The secondary bonds include weak Van Der Waals forces, hydrophobic interactions, and hydrogen bonds.[6] Secondary bonding is more favorable due to the semipermanent nature of the bonds.[5]
Diffusion theory: The mechanism for diffusion involves polymer and mucin chains from the adhesive penetrating the matrix of the substrate and forming a semipermanent bond.[4] As the similarities between the adhesive and the substrate increase, so does the degree of mucoadhesion.[3] The bond strength increases with the degree of penetration, increasing the adhesion strength.[6] The penetration rate is determined by the diffusion coefficient, flexibility and nature of the mucoadhesive chains, mobility and contact time.[5] The diffusion mechanism itself is affected by the length of the molecular chains being implanted and cross-linking density, and is driven by a concentration gradient.[3]
Electronic theory: Also known as electrostatic theory, this process involves the transfer of electrons across the interface between the substrate and adhesive.[4] The net result is the formation of a double layer of charges that are attracted to each other due to balancing of the Fermi layers, and therefore cause adhesion.[5] This theory only works given the assumption that the substrate and adhesive have different electronic surface characteristics.[6]
Fracture theory: Fracture theory is the major mechanism by which to determine the mechanical strength of a particular mucoadhesive, and describes the force necessary to separate the two materials after mucoadhesion has occurred.[5] Ultimate tensile strength is determined by the separating force and the total surface area of the adhesion, and failure generally occurs in one of the surfaces rather than at the interface. [3] Since the fracture theory only deals with the separation force, the diffusion and penetration of polymers is not accounted for in this mechanism [3]
Wetting and adsorption theory
Mucoadhesive process
The mucoadhesive process differs depending on the surface and properties of the adhesive. The four different scenarios are: (1) dry or partially hydrated adhesive on substantial mucus layers, (2) fully hydrated adhesive on substantial mucus layers, (3) dry or partially hydrated adhesive on thin or discontinuous mucus layers, and (4) fully hydrated adhesive on thin or discontinuous mucus layers. However, two general steps of the mucoadhesive process have been identified: the contact stage and the consolidation stage.[7]
Contact stage
The contact stage is the initial wetting that occurs between the adhesive and membrane. This can occur mechanically by bringing together the two surfaces, or through the aerodynamics of the bodily system, e.g. when particles are deposited in the nasal cavity. The principles of initial adsorption can be describe by DLVO theory, which explains the stability of colloids.[8]
Small particles in suspension
According to DLVO theory, particles in suspension are held by a balance of attractive and repulsive forces. This theory can be applied to the adsorption of small molecules, e.g. adhesives, on surfaces, like mucus layers, as well. Particles feel attractive van der Waals forces that promote coagulation; in the context of adsorption, the particle and mucus layers naturally have attractive forces. The attractive forces between particles increases with decreasing particle size due to increasing surface-area-to-volume ratio, which increases the amount of interaction between particles so smaller particles should be easier to adsorb onto the mucus membranes.[9]
DLVO theory also explains some of the challenges to establishing contact between particles and mucus layers in mucoadhesion due to repulsive forces. Particles will develop an electrical double layer if there are ions in solution, as is the case in many bodily systems, promoting electrostatic repulsive forces between the particle and surface. Steric effects can also hinder particle adsorption to surfaces. Entropy or disorder of a system will decrease as particles adsorb to surface which makes establishing contact between particles and a surface more difficult. Particles that have surface groups will also experience a decrease in entropy of those groups as they approach the surface.
Consolidation stage
Strong and prolonged adhesion
The consolidation stage of mucoadhesion involves the establishment of adhesive interactions to reinforce strong or prolonged adhesion. When moisture is present, mucoadhesive materials become activated and the system becomes plasticized [10]. This stimulus allows the mucoadhesive molecules to separate and break free while proceeding to link up by weak van der Waals and hydrogen bonds [10]. Consolidation factors are essential for the surface when exposed to significant dislodging stresses [1]. Multiple mucoadhesion theories exist that explain the consolidation stage, the main two which focus on macromolecular interpenetration and dehydration.
Macromolecular interpenetration theory
The Macromolecular Interpenetration theory, also known as the diffusion theory, states that the mucoadhesive molecules and mucus glycoproteins mutually interact by means of interpenetration of their chains and the forming of secondary semi-permanent adhesive bonds [10]. It is necessary that the mucoadhesive device has features or properties that favor both chemical and mechanical interactions for the macromolecular interpenetration theory to take place [10]. Molecules that can present mucoadhesive properties are molecules with hydrogen bond building groups, high molecular weight, flexible chains, and surface active properties [10].
It is perceived that increase in adhesion force is associated with the degree of penetration of polymer chains [10]. Literature states that the degree of penetration required for efficient bioadhesive bonds lies in the range of 0.2-0.5μm [10]. The following equation can be used to estimate the degree of penetration of polymer and mucus chains:
l = (tDb)½
with t as contact time and Db as the diffusion coefficient of the mucoadhesive material in the mucus [10]. Maximum adhesion strength is reached when penetration depth is approximately equal to polymer chain size [10]. Properties of mutual solubility and structural similarity will improve the mucoadhesive bond [1].
Dehydration theory
The dehydration theory explains why mucoadhesion can arise rapidly. When two gels capable of rapid gelation in an aqueous environment are brought into contact, movement occurs between the two gels until a state of equilibrium is reached [1]. Gels associated with a strong affinity for water will have high osmotic pressures and large swelling forces [1]. The difference in osmotic pressure when these gels contact mucus gels will draw water into the formulation and quickly dehydrate the mucus gel, forcing intermixing and consolidation until equilibrium results [11].
This mixture of formulation and mucus can increase contact time with the mucus membrane, leading to the consolidation of the adhesive bond [11]. However, the dehydration theory does not apply to solid formulations or highly hydrated forms [1].
Mucoadhesives in Drug Delivery
Depending on the dosage form and route, mucoadhesives may be used for either local or systemic administration of pharmaceuticals.The bioavailability of such drugs is affected by many factors unique to each route of application. In general, mucoadhesives work to increase the contact time at these sites, prolonging the residence time and maintaining an effective release rate. These polymeric coatings may be applied to a wide variety of liquid and solid dosages, each specially suited for the route of administration.
Dosage Forms
Tablets
Tablets are small, solid dosages suitable for the use of mucoadhesive coatings. The coating may be formulated to adhere to a specific mucosa, enabling both systemic and targeted local administration. Tablets are generally taken enterally, as the size and stiffness of the form results in poor patient compliance when administered through other routes.[12]
Patches
In general, patches consist of three separate layers that contribute and control the release of medicine. The outer impermeable backing layer controls the direction of release and reduces drug loss away from the site of contact. It also protects the other layers and acts as a mechanical support. The middle reservoir layer holds the drug and is tailored to provide the specified dosage. The final inner layer consists of the mucoadhesive, allowing the patch to adhere to the specified mucosa.[12]
Gels
As a liquid or semisolid dosage, gels are typically used where a solid form would affect the patient’s comfort. As a trade-off, conventional gels have poor retention rates. This results in unpredictable losses of the drug, as the non-solid dosage is unable to maintain its position at the site of administration. Mucoadhesives increase retention by dynamically increasing the viscosity of the gel after application. This allows the gel to effectively administer the drug at the local site while maintaining the comfort of the patient.[12]
Routes of Administration
Oral
With a 0.1-0.7 mm thick mucus layer, the oral cavity serves as an important route of administration for mucoadhesive dosages. Permeation sites can be separated into two groups: sublingual and buccal, in which the former is much more permeable than the latter. However, the sublingual mucosa also produces more saliva, resulting in relatively low retention rates. Thus, sublingual mucosa is preferable for rapid onset and short duration treatments, while the buccal mucosa is more appropriate for longer dosage and onset times. Because of this dichotomy, the oral cavity is suitable for both local and systemic administration. Some common dosage forms for the oral cavity include gels, ointments, patches, and tablets. Depending on the dosage form, some drug loss can occur due to swallowing of saliva. This can be minimized by layering the side of the dosage facing the oral cavity with an impermeable coating(,) commonly seen in patches.[13]
Nasal
With an active surface area of 160 cm^2, the nasal cavity is another noteworthy route of mucoadhesive administration. Due to the sweeping motion of the cilia that lines the mucosa, nasal mucus has a quick turnover of 10 to 15 minutes. Because of this, the nasal cavity is most suitable for rapid, local medicinal dosages. Additionally, its close proximity to the blood-brain barrier makes it a convenient route for administering specialized drugs to the central nervous system. Gels, solutions, and aerosols are common dosage forms in the nasal cavity. However, recent research into particles and microspheres have shown increased bioavailability over non-solid forms of medicine largely due to the use of mucoadhesives.[14]
Ocular
Vaginal
Rectal
See also:
- Bioadhesives
- Wetting
- Adsorption
- DLVO Theory
References
Smart, J. "The Basics and Underlying Mechanisms of Mucoadhesion."Advanced Drug Delivery Reviews 57.11 (2005): 1556-568. Web.
- ^ a b c d e f g Smart, J. "The Basics and Underlying Mechanisms of Mucoadhesion."Advanced Drug Delivery Reviews 57.11 (2005): 1556-568. Web.
- ^ Grießinger, Julia, Sarah Dünnhaupt, Beatrice Cattoz, Peter Griffiths, Sejin Oh, Salvador Borrós I Gómez, Matthew Wilcox, Jeffrey Pearson, Mark Gumbleton, Muthanna Abdulkarim, Irene Pereira De Sousa, and Andreas Bernkop-Schnürch. "Methods to Determine the Interactions of Micro- and Nanoparticles with Mucus." European Journal of Pharmaceutics and Biopharmaceutics (2015): n. pag. Web.
- ^ a b c d e f g Amit, Alexander, Charma Sharad, Ajazuddin, Khad Mohammed Junaid, and Swarna. "Theories and Factor Affecting Mucoadhesive Drug Delivery Systems: A Review." Journal of Advanced Pharmaceutical Technology and Research 1.4 (2010): 381-87. NCBI. Web.
- ^ a b c d e Shaikh, Rahamatullah, Thakur Raghu Raj Singh, Martin James Garland, A. David Woolfson, and Ryan F. Donnelly. "Mucoadhesive Drug Delivery Systems." Journal of Pharmacy and Bioallied Sciences. Medknow Publications, Jan.-Feb. 2011. Web.
- ^ a b c d e Boddupalli, Bindu M., Zulkar N. K. Mohammed, Ravinder A. Nath, and David Banji. "Mucoadhesive Drug Delivery System: An Overview." Journal of Advanced Pharmaceutical Technology & Research. Medknow Publications & Media Pvt Ltd, 2010. Web.
- ^ a b c Tangri, Pranshu, Shaffi Khurana, and N.V. Satheesh Madhav. "Mucoadhesive Drug Delivery: Mechanism and Methods of Evaluation." International Journal of Pharma and Bio Sciences 2.1 (2011): 458-67. IJPBS. Web.
- ^ Smart, John (12 July 2005). "The basics and underlying mechanisms of mucoadhesion". Advanced Drug Delivery Reviews. 57: 1556.
{{cite journal}}
:|access-date=
requires|url=
(help); More than one of|pages=
and|page=
specified (help) - ^ Smart, John (12 July 2005). "The basics and underlying mechanisms of mucoadhesion". Advanced Drug Delivery Reviews. 57: 1556.
{{cite journal}}
:|access-date=
requires|url=
(help); More than one of|pages=
and|page=
specified (help) - ^ Smart, John (12 July 2005). "The basics and underlying mechanisms of mucoadhesion". Advanced Drug Delivery Reviews. 57: 1556.
{{cite journal}}
:|access-date=
requires|url=
(help); More than one of|pages=
and|page=
specified (help) - ^ a b c d e f g h i Boddupalli, Bindu M., Zulkar N. K. Mohammed, Ravinder A. Nath, and David Banji. "Mucoadhesive Drug Delivery System: An Overview."Journal of Advanced Pharmaceutical Technology & Research. Medknow Publications & Media Pvt Ltd, n.d. Web. 27 May 2015.
- ^ a b Carvalho, Flávia Chiva, Marcos Luciano Bruschi, Raul Cesar Evangelista, and Maria Palmira Daflon Gremião. "Mucoadhesive Drug Delivery Systems." Brazilian Journal of Pharmaceutical Sciences Braz. J. Pharm. Sci. 46.1 (2010): n. pag. Web.
- ^ a b c Boddupalli, BinduM; Mohammed, ZulkarN.K; Nath, RavinderA; Banji, David (2010). "Mucoadhesive drug delivery system: An overview". Journal of Advanced Pharmaceutical Technology & Research. 1 (4): 381. doi:10.4103/0110-5558.76436. PMID PMC3255397.
{{cite journal}}
:|access-date=
requires|url=
(help); Check|pmid=
value (help); Check date values in:|accessdate=
(help)CS1 maint: unflagged free DOI (link) - ^ Edsman, Katarina; Hägerström, Helene (1 January 2005). "Pharmaceutical applications of mucoadhesion for the non-oral routes". Journal of Pharmacy and Pharmacology. 57 (1): 12-17. doi:10.1211/0022357055227.
{{cite journal}}
:|access-date=
requires|url=
(help); Check date values in:|accessdate=
(help); More than one of|pages=
and|page=
specified (help) - ^ UGWOKE, M; AGU, R; VERBEKE, N; KINGET, R (3 November 2005). "Nasal mucoadhesive drug delivery: Background, applications, trends and future perspectives". Advanced Drug Delivery Reviews. 57 (11): 1640–1665. doi:10.1016/j.addr.2005.07.009.
{{cite journal}}
:|access-date=
requires|url=
(help); Check date values in:|accessdate=
(help)