Jump to content

Giubo

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Sookenon (talk | contribs) at 15:07, 18 September 2015 (References). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A driveshaft coupling. Note the split damage beginning to appear
A giubo.

A Giubo (/ˈb/ JEW-boh; etymology: Giunti Boschi), also known as a flex disc, and sometimes misspelled as guibo, is a flexible coupling used to transmit rotational torque between the drive shaft and the companion flange on mechanical devices, such as an automobile engine.

The giubo is made from flexible synthetic rubber and is designed to allow some angular misalignment while reducing driveline vibration in mechanical power transmission applications.

How it works

Input and output shaft flanges are bolted to the Giubo on either side using alternating hole positions, so that the flanges are not connected directly to one another but instead only through the rubber material of the coupling. The elasticity of the rubber absorbs vibration and flexes for alignment. It follows that the rubber must withstand the application's full transmitted torque, for which reason the rubber is often reinforced internally using moulded-in fibre material.

Name

Giubo is a contraction of the Italian word giunto ('joint' or 'coupling') and the surname of the Italian engineer who designed and patented the first flex disc, Antonio Boschi (b1896-d1988).[1] He later founded GIUBO SpA, a company solely dedicated to manufacturing flex discs.[2] The Giubo is believed[citation needed] first to have been used for this purpose on the Alfa Romeo model 1900, produced between 1950 and 1959.

See also

References

  1. ^ fondazioneboschidistefano.it
  2. ^ "Giubo spelling and pronunciation". Alfa Romeo Owners' Club digest. 2003-06-17. Retrieved 2004-04-27.