Compact Model Coalition

The Compact Model Coalition (formerly the Compact Model Council) is a working group in the Electronic Design Automation industry formed to choose, maintain and promote the use of standard models. Commercial and industrial analog simulators (such as SPICE) need to add device models as technology advances (see Moore's law) and earlier models become inaccurate. Before this group was formed, new transistor models were largely proprietary, which severely limited the choice of simulators that could be used.

It was formed in August, 1996, for the purpose developing and standardizing the use and implementation of SPICE models and the model interfaces. In May 2013, the Silicon Integration Initiative (Si2) and TechAmerica announced the transfer of the Compact Model Council to Si2 and a renaming to Compact Model Coalition.

New models are submitted to the Council, where their technical merits are discussed, and then potential standard models are voted on. See the article SIMULATION: PSP transistor tapped for standard for an example of this process.

Some of the models supported by the Compact Modeling Council include:

• BSIM3, a MOSFET model from UC Berkeley (see BSIM).
• BSIM4, a more modern MOSFET model, also from UC Berkeley.
• PSP, another MOSFET model. PSP originally stood for Penn State-Philips, but one author moved to ASU, and Philips spun off their semiconductor group as NXP Semiconductors.
• BSIMSOI, a model for silicon on insulator MOSFETs.
• HICUM or HIgh CUrrent Model for bipolar transistors, from CEDIC, Dresden University of Technology, Germany, and UC San Diego, USA.
• MEXTRAM, a compact model for bipolar transistors that aims to support the design of bipolar transistor circuits at high frequencies in Si and SiGe based process technologies. MEXTRAM is developed and supported at Delft University of Technology.

See also

• Electronic circuit simulation

External links

• Member list at CMC website
• Site map of CMC website including links to working groups