Solution of triangles (Template:Lang-lat) is the historical term for solving the main trigonometric problem of finding the characteristics of a triangle (angles and lengths of sides), when some of these are known. The triangle can be located on a plane or on a sphere. Applications requiring triangle solutions include geodesy, astronomy, construction, and navigation.
Solving plane triangles
A general form triangle has six main characteristics (see picture): three linear (side lengths ) and three angular (). The classical plane trigonometry problem is to specify three of the six characteristics and determine the other three. A triangle can be uniquely determined in this sense when given any of the following:[1][2]
Three sides (SSS)
Two sides and the included angle (SAS)
Two sides and an angle not included between them (SSA), if the side length adjacent to the angle is shorter than the other side length.
A side and the two angles adjacent to it (ASA)
A side, the angle opposite to it and an angle adjacent to it (AAS).
Three angles (AAA) on the sphere (but not in the plane).
For all cases in the plane, at least one of the side lengths must be specified. If only the angles are given, the side lengths cannot be determined, because any similar triangle is a solution.
Main theorems
The standard method of solving the problem is to use fundamental relations.
To find an unknown angle, the law of cosines is safer than the law of sines. The reason is that the value of sine for the angle of the triangle does not uniquely determine this angle. For example, if , the angle can be equal either or . Using the law of cosines avoids this problem: within the interval from to the cosine value unambiguously determines its angle. On the other hand, if the angle is small (or close to 180°), then it is more robust numerically to determine it from its sine than its cosine because the arc-cosine function has a divergent derivative at 1 (or −1).
We assume that the relative position of specified characteristics is known. If not, the mirror reflection of the triangle will also be a solution. For example, three side lengths uniquely define either a triangle or its reflection.
Three sides given (SSS)
Let three side lengths be specified. To find the angles , the law of cosines can be used:[3]
Then angle .
Some sources recommend to find angle from the law of sines but (as Note 1 above states) there is a risk of confusing an acute angle value with an obtuse one.
Another method of calculating the angles from known sides is to apply the law of cotangents.
Two sides and the included angle given (SAS)
Here the lengths of sides and the angle between these sides are known. The third side can be determined from the law of cosines:[4]
Now we use law of cosines to find the second angle:
Finally,
Two sides and non-included angle given (SSA)
This case is not solvable in all cases; a solution is guaranteed to be unique only if the side length adjacent to the angle is shorter than the other side length. Assume that two sides and the angle are known. The equation for the angle can be implied from the law of sines:[5]
We denote further (equation's right side). There are four possible cases:
If , no such triangle exists because the side does not reach line BC. For the same reason a solution does not exist if the angle and
If , a unique solution exists: , i.e., the triangle is right-angled.
If two alternatives are possible.
If , the angle may be acute: or obtuse: . The picture on right shows the point , the side and the angle as the first solution, and the point , side and the angle as the second solution.
If then (the larger side corresponds to a larger angle). Since no triangle can have two obtuse angles, is acute angle and the solution is unique.
Once is obtained, the third angle .
The third side can then be found from the law of sines:
A side and two adjacent angles given (ASA)
The known characteristics are the side and the angles . The third angle
Two unknown side can be calculated from the law of sines:[6]
A side, one adjacent angle and the opposite angle given (AAS)
The procedure for solving an AAS triangle is same as that for an ASA triangle: First, find the third angle by using the angle sum property of a triangle, then find the other two sides using the law of sines.
Solving spherical triangles
The general spherical triangle is fully determined by three of its six characteristics (3 sides and 3 angles). Note that the sides of a spherical triangle are measured by angular rather than linear units, based on the corresponding central angles.
The solution of triangles for non-Euclideanspherical geometry has some differences from the planar case. For example, the sum of the three angles depends on the triangle. In addition, there are no unequal similar triangles, and so the problem of constructing a triangle with specified three angles has a unique solution. The basic relations used to solve a problem are similar to those of the planar case: see Law of cosines (spherical) and Law of sines (spherical).
Two sides and the included angle given (spherical SAS)
Known: the sides and the angle among it. The side can be found from the law of cosines:
The angles can be calculated as above, or by using Napier's analogies:
This problem arises in the navigation problem
of finding the great circle between 2 points on the earth specified by their
latitude and longitude; in this application, it's important to use formulas which are not
susceptible to round-off errors. For this purpose, the following formulas (which may be
derived using vector algebra) can be used
where the signs of the numerators and denominators in these expressions
should be used to determine the quadrant of the arctangent.
Two sides and non-included angle given (spherical SSA)
This problem is not solvable in all cases; a solution is guaranteed to be unique only if the side length adjacent to the angle is shorter than the other side length. Known: the sides and the angle not between them. A solution exists if the following condition holds:
The above algorithms become much simpler if one of the angles of a triangle (for example, the angle ) is the right angle. Such a spherical triangle is fully defined by its two elements, and the other three can be calculated using Napier's Pentagon or the following relations.
If one wants to measure the distance from shore to a remote ship via triangulation, one marks on the shore two points with known distance between them (base line). Let be the angles between base line and the direction to ship.
From the formulas above (ASA case) one can define the length of the triangle height:
This method is used in cabotage. The angles are defined by observations familiar landmarks from the ship.
As another example, if one wants to measure the height of a mountain or a high building, the angles from two ground points to the top are specified. Let be the distance between tis points. From the same ASA case formulas we obtain:
The distance between two points on the globe
To calculate the distance between two points on the globe,
Point A: latitude longitude and
Point B: latitude longitude
we consider the spherical triangle, where is the North Pole. Some characteristics are:
Euclid (1956) [1925]. Sir Thomas Heath (ed.). The Thirteen Books of the Elements. Volume I. Translated with introduction and commentary. Dover. ISBN0-486-60088-2.
External links
Trigonometric Delights, by Eli Maor, Princeton University Press, 1998. Ebook version, in PDF format, full text presented.
Trigonometry by Alfred Monroe Kenyon and Louis Ingold, The Macmillan Company, 1914. In images, full text presented. Google book.