Jump to content

Abbe number

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Interferometrist (talk | contribs) at 12:35, 17 November 2015 (top: "group velocity dispersion": wrong. The applicable figure is the phase velocity dispersion = "dispersion". You can have dispersion with no (or little) GVD.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

An Abbe diagram plots the Abbe number against refractive index for a range of different glasses (red dots). Glasses are classified using the Schott Glass letter-number code to reflect their composition and position on the diagram.
Influences of selected glass component additions on the Abbe number of a specific base glass.[1]

In physics and optics, the Abbe number, also known as the V-number or constringence of a transparent material, is a measure of the material's dispersion (variation of refractive index with wavelength) in relation to the refractive index, with high values of V indicating low dispersion (low chromatic aberration). It is named after Ernst Abbe (1840–1905), the German physicist who defined it.

The Abbe number,[2][3] VD, of a material is defined as

where nD, nF and nC are the refractive indices of the material at the wavelengths of the Fraunhofer D-, F- and C- spectral lines (589.3 nm, 486.1 nm and 656.3 nm respectively).

Abbe numbers are used to classify glass and other optically transparent materials. For example, flint glass has V < 50 and crown glass has V > 50. Typical values of V range from around 20 for very dense flint glass, around 30 for polycarbonate plastics, and up to 65 for very light crown glass, and up to 85 for fluor-crown glass. Abbe numbers are only a useful measure of dispersion for visible light, and for other wavelengths, or for higher precision work, the full dispersion relation (refractive index as a function of wavelength) is used.

Due to the difficulty and inconvenience in producing sodium and hydrogen lines, alternate definitions of the Abbe number are used in some contexts (ISO 7944).[4] The value Vd is given by

which defines the Abbe number with respect to the yellow Fraunhofer d (or D3) helium line at 587.5618 nm wavelength. It can also be defined using the green mercury E-line at 546.073 nm:

where F' and C' are the blue and red cadmium lines at 480.0 nm and 643.8 nm, respectively.

An Abbe diagram is produced by plotting the Abbe number Vd of a material versus its refractive index nd. Glasses can then be categorised by their composition and position on the diagram. This can be a letter-number code, as used in the Schott Glass catalogue, or a 6-digit glass code.

Abbe numbers are used to calculate the necessary focal lengths of achromatic doublet lenses to minimize chromatic aberration.

The following table lists standard wavelengths at which n is usually determined, indicated by subscripts.[5] For example, nD is measured at 589.3 nm:

λ in nm Fraunhofer's symbol Light source Color
365.01 i Hg UV
404.66 h Hg violet
435.84 g Hg blue
479.99 F' Cd blue
486.13 F H blue
546.07 e Hg green
587.56 d He yellow
589.3 D Na yellow
643.85 C' Cd red
656.27 C H red
706.52 r He red
768.2 A' K IR
852.11 s Cs IR
1013.98 t Hg IR

See also

References

  1. ^ Abbe number calculation of glasses
  2. ^ Hovestadt, H. (1902). Jena Glass and Its Scientific and Industrial Applications. London: Macmillan and Co. pp. 1–81.
  3. ^ Bergmann, Ludwig; Clemens Schaefer (1999). Optics of Waves and Particles. Berlin: Walter de Gruyter. pp. 198–201. ISBN 3-11-014318-6.
  4. ^ Meister, Darryl. "Understanding Reference Wavelengths" (PDF). Carl Zeiss Vision. Retrieved 2013-03-13.
  5. ^ L. D. Pye, V. D. Frechette, N. J. Kreidl: "Borate Glasses"; Plenum Press, New York, 1977