Jump to content

Shigeo Shingo

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 12.97.18.26 (talk) at 23:25, 23 March 2016 (→Life and work). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Shigeo Shingō
Born1909
Saga, Japan
Died1990
Japan
NationalityJapanese
Other namesShingō dai-sensei
Occupation(s)Management trainer and consultant, in Industrial engineering & Business management
Known forSMED, P-Course

Shigeo Shingo (新郷 重夫, Shingō Shigeo, 1909 - 1990), born in Saga City, Japan, was a Japanese industrial engineer who is considered as the world’s leading expert on manufacturing practices and the Toyota Production System.

Life and work

After having worked as a technician specialized in fusions at the Taiwanese railways in Taipei, at the end of the World War II, in 1945, he started to work at the Japan Management Association (JMA) in Tokyo, becoming a consultant focused on the improvement of factory management. Gathering tips from the improvement experiences in the field he had in 1950 at Toyo Ind. (now Mazda) and in 1957 at the sites in Hiroshima of the Mitsubishi Heavy Industry, since 1969 Shingō got involved in some actions in Toyota Motor Corporation (Toyota) for the reduction of set-up time (change of dies) of pressing machines which took him to the formulation of a specific technique based on operational analysis, which shortened set-up times from 1 to 2 hours (or even half a day) per each exchange of dies to a rapid setting of a few minutes. The method spread out under the English denomination Single Minute Exchange of Die, abbreviated as SMED.

Shingo may well be known better in the West than in Japan, as a result of his meeting Norman Bodek, an American entrepreneur and founder of Productivity Inc. in the USA. In 1981 Bodek had travelled to Japan to learn about the Toyota Production System, and came across books by Shingō, who as an external consultant had been teaching Industrial engineering courses at Toyota since 1955. Since 1947, in fact, Shingō had been involved all over Japan in the training of thousands of people, who joined his courses on the fundamental techniques of analysis and improvement of the operational activities in factories (among which the P-Course®, or Production Course).[1]

Shingō had written his Study of the Toyota Production System in Japanese and had it translated, very poorly, into English in 1980. Bodek took as many copies of this book as he could to the USA and arranged to translate Shingo's other books into English, eventually having his original study re-translated. Bodek also brought Shingō to lecture in the USA and developed one of the first Western lean manufacturing consultancy practices with Shingō's support.

The relevance of his contribution has sometimes been doubted upon, but it is substantially confirmed by the opinions of his contemporaries,[2] many saw him even as a contributor to the fundamental concepts of TPS, such as Just in time, and the “pull” production system, which were created by Toyota and Mr.Taiichi Ohno and still remain a strong logical and practical basis for the lean production and lean thinking management approaches. The myth prevails that Shingo invented the Toyota Production System but what can be stated is that he did document the system. Thanks to his charisma we owe to Shingo the merit of having contributed to the formalization of some aspects of the management philosophy known as the Toyota Production System (TPS), developed and applied in Japan since the 1950s and later implemented in a huge number of companies in the world.

In 1988, the Jon M. Huntsman School of Business at Utah State University recognized Dr. Shingō for his lifetime accomplishments and created the Shingo Prize for Operational Excellence that recognizes world-class, lean organizations and operational excellence.

The theorist of important innovations related to Industrial engineering, such as Poka-yoke and the Zero Quality Control, Shingō could influence fields other than manufacturing. For example, his concepts of SMED, mistake-proofing, and "zero quality control" (eliminating the need for inspection of results) have all been applied in the sales process engineering[3]

Shingo is the author of several books including: A Study of the Toyota Production System; Revolution in Manufacturing: The SMED System; Zero Quality Control: Source Inspection and the Poka-yoke System; The Sayings of Shigeo Shingo: Key Strategies for Plant Improvement; Non-Stock Production: The Shingo System for Continuous Improvement and The Shingo Production Management System: Improving Process Functions.

Education

Bibliography

  • Shigeo Shingo: A Revolution in Manufacturing: The Smed System, Productivity Press, 1985 Template:En icon, ISBN 0-915299-03-8
  • Shigeo Shingo: A Study of the Toyota Production System, Productivity Press, 1981 Template:Ja icon, 1989 Template:En icon, ISBN 0-915299-17-8.
  • Shigeo Shingo: Modern Approaches to Manufacturing Improvement: The Shingo System, Productivity Press, 1990 Template:En icon, ISBN 0-915299-64-X
  • Shigeo Shingo: Quick Changeover for Operators: The SMED System, Productivity Press, 1996 Template:En icon, ISBN 1-56327-125-7
  • Shigeo Shingo: The Sayings of Shigeo Shingo: Key Strategies for Plant Improvement, Productivity Press, 1987 Template:En icon, ISBN 0-915299-15-1
  • Shigeo Shingo: Zero Quality Control: Source Inspection and the Poka-Yoke System, Productivity Press, 1986 Template:En icon, ISBN 0-915299-07-0
  • Shigeo Shingo: Non-Stock Production: The Shingo System for Continuous Improvement, Productivity Press, 1988 Template:En icon, ISBN 0-915299-30-5
  • Shigeo Shingo: Mistake-Proofing for Operators: The ZQC System, Productivity Press, 1997 Template:En icon, ISBN 1-56327-127-3
  • Shigeo Shingo: The Shingo Production Management System: Improving Process Functions (Manufacturing & Production), Productivity Press, 1992 Template:En icon, ISBN 0-915299-52-6
  • Shigeo Shingo: Enfoques Modernos Para la Mejora En la Fabricacion: El Sistema Shingo, Productivity Press, 1992 Template:Es icon, ISBN 84-87022-77-4
  • Shigeo Shingo: Produccion Sin Stocks: El Sistema Shingo Para la Mejora Continua, Productivity Press, 1991 Template:Es icon, ISBN 84-87022-74-X
  • Shigeo Shingo: Das Erfolgsgeheimnis der Toyota-Produktion, Verlag moderne industrie, 1992 Template:De icon, ISBN 3-478-91062-5
  • Shigeo Shingo: Kaizen and The Art of Creative Thinking, Enna Product Corporation and PCS Inc, 2007 Template:En icon, ISBN 1897363591

Footnotes

  1. ^ Template:JA JMAグループの原点・JMA Group no genten -The DNA of JMA Group, edited by JMA Group renkei sokushin iinkai, Tokyo 2010 - pp 34-35
  2. ^ e.g.: Akira Kōdate
  3. ^ Paul H. Selden (1997). Sales Process Engineering: A Personal Workshop. Milwaukee, WI: ASQ Quality Press. pp. 94–97.

Further reading

See also


Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Shigeo_Shingo&oldid=711626962"