Jump to content

Ring size

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Jwatkins1989 (talk | contribs) at 17:19, 27 June 2016 (added two references). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A Bergeon ring sizing stick. (ISO 8653:1986 and number scales)

Ring size is a measurement used to denote the circumference of jewellery rings.

Systems

There are several systems for denoting the sizes of jewellery rings in use around the world:[1]

  • The ISO standard for ring sizes is ISO 8653:1986, which defines standard ring sizes in terms of the inner circumference of the ring measured in millimetres.[2]
  • In the United States and Canada, ring sizes are specified using a numerical scale, with quarter and half sizes. An increase of a full size is an increase of 0.032 inch (0.8128 mm) in diameter, or roughly 1/10 inch (more precisely, 0.1005 in or 2.55 mm) in inside circumference.
  • In Ireland, the United Kingdom and Australia,[3] ring sizes are specified using an alphabetical scale, with half sizes.
  • In India, Japan and China, ring sizes are specified using a numerical scale, that only has whole sizes, and does not have simple linear correlation with diameter or circumference.
  • In Austria, France, Germany, Belgium and Scandinavia, ring sizes are specified using actual internal circumference in mm (the same as the ISO standard). In some countries, half sizes may be used.
  • In Italy, Spain, Netherlands, and Switzerland, ring sizes are specified as the circumference minus 40mm. A 50 in Germany will be a 10 in Switzerland.

Equations

  • US, Canada, Mexico: ring_inside_circumference = 36.5 mm + 2.55 mm × ring_size
  • US, Canada, Mexico: ring_diameter = 11.63 mm + 0.8128 mm × ring_size
Conversion chart for ring sizes
Inside diameter Inside circumference Sizes
(in) (mm) (in) (mm) United States,
Canada and
Mexico
United Kingdom,
Ireland,
Australia and
New Zealand
China,
Japan,
South America
India Italy,
Spain,
Netherlands,
Switzerland
0.458 11.63 1.44 36.5 0
0.466 11.84 1.46 37.2 ¼
0.474 12.04 1.49 37.8 ½ A
0.482 12.24 1.51 38.5 ¾
0.49 12.45 1.54 39.1 1 B 1
0.498 12.65 1.56 39.7
0.506 12.85 1.59 40.4 C 0.5
0.514 13.06 1.61 41.0 1 1
0.522 13.26 1.64 41.7 2 D 2 2 1.75
0.53 13.46 1.67 42.3 2.25
0.538 13.67 1.69 42.9 E 3 3 3
0.546 13.87 1.72 43.6 4 3.5
0.554 14.07 1.74 44.2 3 F 4 4.25
0.562 14.27 1.77 44.8 5 5 4.75
0.57 14.48 1.79 45.5 G 5.5
0.578 14.68 1.82 46.1 6 6 6
0.586 14.88 1.84 46.8 4 H 7 6.75
0.594 15.09 1.87 47.4 7 7.5
0.602 15.29 1.89 48.0 I 8 8 8
0.61 15.49 1.92 48.7 J 9 8.75
0.618 15.70 1.94 49.3 5 9 9.25
0.626 15.90 1.97 50.0 K 10 10
0.634 16.10 1.99 50.6 10 10.5
0.642 16.31 2.02 51.2 L 11 11.25
0.65 16.51 2.04 51.9 6 11 12 11.75
0.658 16.71 2.07 52.5 M 12 12.5
0.666 16.92 2.09 53.1 13 13 13.25
0.674 17.12 2.12 53.8 N 13.75
0.682 17.32 2.14 54.4 7 14 14 14.5
0.69 17.53 2.17 55.1 O 15 15
0.698 17.73 2.19 55.7 15 15.75
0.706 17.93 2.22 56.3 P 16 16.25
0.714 18.14 2.24 57.0 8 16 17 17
0.722 18.34 2.27 57.6 Q 17.5
0.73 18.54 2.29 58.3 17 18 18.25
0.738 18.75 2.32 58.9 R 19 19
0.746 18.95 2.34 59.5 9 18 19.5
0.754 19.15 2.37 60.2 S 20 20.25
0.762 19.35 2.39 60.8 19 21 20.75
0.77 19.56 2.42 61.4 T 21.5
0.778 19.76 2.44 62.1 10 20 22 22
0.786 19.96 2.47 62.7 10¼ U 21 23 22.75
0.794 20.17 2.49 63.4 10½ 22 23.25
0.802 20.37 2.52 64.0 10¾ V 24 24
0.81 20.57 2.54 64.6 11 23 25 24.75
0.818 20.78 2.57 65.3 11¼ W 25.25
0.826 20.98 2.59 65.9 11½ 24 26 26
0.834 21.18 2.62 66.6 11¾ X 26.5
0.842 21.39 2.65 67.2 12 25 27 27.25
0.85 21.59 2.67 67.8 12¼ Y 28 27.75
0.858 21.79 2.70 68.5 12½ Z 26 28.5
0.866 22.00 2.72 69.1 12¾ 29 29
0.874 22.20 2.75 69.7 13 27 30 29.75
0.882 22.40 2.77 70.4 13¼ Z1 30.5
0.89 22.61 2.80 71.0 13½ 31 31
0.898 22.81 2.82 71.7 13¾ Z2 32 31.75
0.906 23.01 2.85 72.3 14 Z3 32.25
0.914 23.22 2.87 72.9 14¼ 33 33
0.922 23.42 2.90 73.6 14½ Z4 33.5
0.93 23.62 2.92 74.2 14¾ 34 34.25
0.938 23.83 2.95 74.8 15 35 34.75
0.946 24.03 2.97 75.5 15¼ 35.5
0.954 24.23 3.00 76.1 15½ 36 36.25
0.962 24.43 3.02 76.8 15¾ 36.75
0.97 24.64 3.05 77.4 16 37 37.5

Ring sizes can be measured physically by a plastic or metal ring sizer, or by measuring the girth of a ring that already fits. There are also online measuring tools available. Online measuring tools vary, but many offer multiple ways to measure the ring size, such as wrapping a paper cutout around your finger, or measuring a current ring according to a chart.[4]

References

  1. ^ "Ring Finger Sizes".
  2. ^ "ISO 8653:2016 - Jewellery -- Ring-sizes -- Definition, measurement and designation". ISO. Retrieved 2016-06-27.
  3. ^ PDF Ring sizer with Australian Sizes
  4. ^ "Ring Sizer | 7 Charming Sisters - Jewelry". 7 Charming Sisters, LLC. Retrieved 2016-06-27.