Jump to content

Ghost imaging

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 182.253.195.146 (talk) at 01:33, 18 October 2016 (History). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Ghost imaging (also called "coincidence imaging") is a technique that produces an image of an object by combining information from two light detectors: a conventional, multi-pixel detector that doesn't view the object, and single-pixel (bucket) detector that does view the object. Whether or not this technique requires quantum entanglement of photons for explanation is debated.[1]

Tonok

Mechanism

A simple example clarifies the basic principle of ghost imaging.[2] Imagine two transparent boxes: one that is empty and one that has an object within it. The back wall of the empty box contains a grid of many pixels (i.e. a camera), while the back wall of the box with the object is a large single-pixel (a bucket detector). Next, shine laser light into a beamsplitter and reflect the two resulting beams such that each passes through the same part of its respective box at the same time. For example, while the first beam passes through the empty box to hit the pixel in the top-left corner at the back of the box, the second beam passes through filled box to hit the top-left corner of the bucket detector.

Now imagine moving the laser beam around in order to hit each of the pixels at the back of the empty box, meanwhile moving the corresponding beam around the box with the object. While the first light beam will always hit a pixel at the back of the empty box, the second light beam will sometimes be blocked by the object and will not reach the bucket detector. A processor receiving a signal from both light detectors only records a pixel of an image when light hits both detectors at the same time. In this way, a silhouette image can be constructed, even though the light going towards the multi-pixel camera did not touch the object.

In this simple example, the two boxes are illuminated one pixel at a time. However, using quantum correlation between photons from the two beams, the correct image can also be recorded using complex light distributions. Also, the correct image can be recorded using only the single beam passing through a computer-controlled light modulator to a single-pixel detector.[3]

References

  1. ^ 'Ghost Imaging with a Single Detector' by Y.Bromberg, O.Katz and Y.Silberberg
  2. ^ ""Two-Photon" Coincidence Imaging with a Classical Source". Physical Review Letters. 89: 113601. 2002. Bibcode:2002PhRvL..89k3601B. doi:10.1103/PhysRevLett.89.113601. {{cite journal}}: Unknown parameter |authors= ignored (help)
  3. ^ Cite error: The named reference computational was invoked but never defined (see the help page).