Jump to content

SA3 coupler

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 200.63.47.32 (talk) at 10:53, 30 October 2016 (→Experimentation: Removed link to Willison coupler, to avoid endless loop). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Part of a series on
Rail transport
Infrastructure
Service and rolling stock
Urban rail transit
Miscellanea
icon Transport portal
The simplified scheme of the SA-3 automatic couplers.
Click here for animation
Detail of two coupled SA-3 couplers
A Russian SA-3 Railroad Coupler
SA-3 coupler, uncoupled

The SA3 coupler is a type of railway coupling used mainly, but not exclusively, in Russia and other states of the former Soviet Union.[1]

Railways in Russia used European (British) buffers and chain couplings from their inception. These couplings had three main limitations. Firstly the load was limited. Secondly, the couplings were not semi-automatic like the North American Janney AAR coupler. Thirdly, the buffers could get buffer-locked and cause accidents. Advantages and disadvantages of these couplings are intermediate between Janney AAR couplers and Scharfenberg couplers.[citation needed]

It took a while to find a replacement. One option was to copy the Janney AAR coupling, as Japan (1922), Australia (1915) and other countries were starting to do, or to devise something else. The Soviets were not afraid to copy, as they had imported many engines and engineers during the various five year plans. In the end they chose the SA3, although implementation was delayed by World War II.

The Willison coupler was patented by John Willison from Derby, England.[2][3] It was registered in 1910, and approved in USA 1916, and in Germany. The company Knorr bought it and it started to be used in Germany for some heavy trains and some suburban trains in Paris. The Soviet Union needed a new coupler and decided to use this coupler.

Experimentation

In the late 1920s, the UIC had established a working group for the replacement of the chain link coupler, which restricts the efficiency of freight railroads in a major way. Many railroads ran prototypes. In Germany, coal trains with Scharfenberg couplers yielded unfavourable results in winter weather, other railroads did similar tests. But the UIC was not able to agree on one replacement. This failure of the UIC, which hampers freight operation in Europe even today, led to the decision by the Soviet Union to move forward without a standard being achieved in the talks.

The coupler was named SA-3 (abbreviation of Russian [Советская автосцепка, 3-й вариант] Error: {{Lang}}: text has italic markup (help), Soviet Automatic-Coupler 3rd Variant) and was an improved version of Willison coupler, with better design of lock parts and mechanics. This type of coupler was standardized for the railways in the Soviet Union after World War II.

Further tests were carried out in the 1950s.[4]

Operation of this coupler

Helper locomotives at the end of the train are rarely used in the countries of the former Soviet Union. The load of the freight per train is not as heavy as on American railways. This is due to the 3 kV DC electrification system. Most of the catenary in the former Soviet Union is fed with 3 kV DC and its construction (except some lines around Moscow) does not allow more than 6,000 kW (8,046 hp) per electric section (one locomotive has power effort from 3,000 to 6,000 kW or 4,023 to 8,046 hp).

Although the SA-3 coupler is primarily used in the countries of the former Soviet Union, they are visible every day at the transshipping stations, at the eastern borders of the European Union (Poland, Slovakia and Hungary). Since bogie-changing technology has progressed, this allows for cars with SA-3 coupler to regularly operate on the standard gauge tracks. A special converter car is inserted between standard and broad gauge cars for this operation, with different couplers (SA-3 and standard) on either end. Although these coupling freight cars (light blue coloured at the Slovak Cargo Railways) have room for cargo, they are always operated empty.

If the vehicle fitted with the SA3 retains its buffers, then a special adapter allows that vehicle to couple to another vehicle fitted with buffers and chains, provided that the buffers have the same spacing or gauge. This appears to be done in Iran.

On the Uzhhorod–Košice broad-gauge track between Košice and Uzhhorod, Ukraine, of which the major part is on Slovakian territory, SA3 couplings are used exclusively. The railway is used for ore and coal transports from Kryvyi Rih, Ukraine to the US Steel mill in Košice and coal to the power plant of Vojany. In 2008, this line is to be extended into Austria.

In addition, the heavy iron ore trains on the Swedish Malmbanan began to use SA3 couplings in 1969 after problems with snapping chain couplers and a need for ever increasing capacity with higher train weights. Today, IORE locomotives haul trains of 68 hopper cars of 120 tonnes (120 long tons; 130 short tons) with a total weight of over 8,000 tonnes (7,900 long tons; 8,800 short tons) over gradients of 10 per-mille (1%) in harsh weather conditions, from the LKAB mine in Kiruna to the ice-free harbour of Narvik, Norway using couplings of the SA3 type without any problem. They tried out Janney couplers, too, when moving beyond 8,000 tons because SA-3 hasn't seen much use at such loads before that: in the SU, freight trains rarely exceeded 6,000 tons. The earlier SJ Dm3 locomotives have buffers fitted; therefore, they can couple with cars (or locomotives for transportation purposes) with a chainlink coupler.

The longest and heaviest train with SA3 couplings ran on 20 February 1986 from Ekibastuz to the Urals, Soviet Union. The composition consisted of 439 coal wagons and several diesel locomotives distributed along the train with a mass of 43,400 tonnes and the total length of 6.5 kilometres (4.0 mi).[5]

Future

The new European Automatic Center Coupler (C-AKv)[6] has been based on this coupler, with the extended features of automatic brake and electric couplings. It also has vertical stability added, so that the coupling cannot fall down and damage the tracks or cause a derailment. It is compatible with the standard SA3 coupler and will have buffers needed for use with the standard chain couplings under the long transition period. The electric plugs would be most useful with electronically controlled pneumatic brakes.

Usage

The former Soviet Union: Template:Multicol

Template:Multicol-break

Template:Multicol-break

Template:Multicol-end

Other countries with extensive usage

Some usage

See also

References

  1. ^ Intermat/Willison coupler
  2. ^ Patent US1194109 A
  3. ^ Patent US1194110 A
  4. ^ http://www.ba-bautzen.de/wirtschaftssenioren/amk/amkenglish/geschichteamk_e.htm
  5. ^ Kazakhstan railways
  6. ^ Automatic Center Coupler (C-AKv)
  7. ^ http://www.irwincar.com/couplers.php
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=SA3_coupler&oldid=746922405"