Jump to content

Magnetorheological damper

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 67.149.33.119 (talk) at 00:52, 13 March 2017 (Made clear that Magnetorheological technology was invented by the Delphi Division of General Motors in the USA, NOT the UK. Delphi didn't become a UK company until AFTER 2009, many years after the technology spoken of in this article was developed). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A magnetorheological damper or magnetorheological shock absorber is a damper filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet.[1][2][3] This allows the damping characteristics of the shock absorber to be continuously controlled by varying the power of the electromagnet. This type of shock absorber has several applications, most notably in semi-active vehicle suspensions which may adapt to road conditions, as they are monitored through sensors in the vehicle, and in prosthetic limbs.[4]

Types

Vehicles

History

The technology was originally developed by General Motors Delphi Automotive Division based in the USA and then developed further by BeijingWest Industries in China after BeijingWest Industries bought the technology from General Motors. BeijingWest Industries has subsequently introduced improvements including a redesigned ECU and the introduction of a dual coil system.

Ground-based

These types of systems are available from OEMs for several vehicles, including the Acura MDX, Audi TT and R8, Buick Lucerne, Cadillac ATS, CTS-V, DTS, XLR, SRX, STS, Chevrolet Corvette, Camaro ZL1, Ferrari 458 Italia, 599GTB, F12 Berlinetta, Shelby GT350, Holden HSV E-Series and Lamborghini Huracán.[2] These systems were produced by the Delphi Corporation and now by BWI Group under the proprietary name MagneRide.[5][6]

MillenWorks has also included them in several military vehicles including the MillenWorks Light Utility Vehicle, and in retrofits to the US Army Stryker and HMMWV for testing by TARDEC.[7][8]

Aviation

MRF-based dampers are excellent candidates for stability augmentation of the lead-lag (in-plane bending) mode of rotor blades in helicopters.[9] MRF-based squeeze film dampers are being designed for use in the rotary wing industry to isolate vibrations from the aircraft structure and crew.[10]

Control

A magnetorheological damper is controlled by algorithms specifically designed for the purpose. There are plenty of alternatives, such as skyhook or groundhook algorithms.[11] The idea of the algorithms is to control the yield point shear stress of the magnetorheological fluid with electric current. When the fluid is brought into a magnetic field, the metal particles of the fluid are aligned according to the field lines. This makes the fluid stiff. When this occurs at the right instant, the properties of the damper change, which helps in attenuating an undesired shock or vibration. The relative efficacy of magnetorheological dampers to active and passive control strategies is usually comparable.[12]

See also

References

  1. ^ a b "Innovative Designs for Magneto-Rheological Dampers" (PDF). Retrieved 2013-12-08.
  2. ^ a b Primary Suspension Archived October 14, 2007, at the Wayback Machine
  3. ^ http://www.lord.com/Home/MagnetoRheologicalMRFluid/MRFluidTechnology/tabid/3318/Default.aspx MR Fluid Technology Archived October 13, 2007, at the Wayback Machine
  4. ^ Technology Compared Archived October 17, 2007, at the Wayback Machine
  5. ^ "Press Release: Audi R8 Features Delphi's Revolutionary MagneRide Semi-Active Suspension". Delphi.com. Retrieved 2013-12-08.
  6. ^ "Ferrari F12 Berlinetta news and pictures new Ferrari supercar". evo. 2012-02-29. Retrieved 2012-03-05.
  7. ^ http://www.millenworks.com/html/aboutus/news/Stryker_Test.pdf MillenWorks Active Damper Suspension System Archived November 29, 2007, at the Wayback Machine
  8. ^ "A New Generation of Magneto-Rheological Fluid Dampers" (PDF). Retrieved 2013-12-08.
  9. ^ “Characterization of Magnetorheological Helicopter Lag Dampers.” G.M. Kamath, N.M. Wereley, and M.R. Jolly (1999). J. American Helicopter Society, 44(3):234–248.
  10. ^ http://www.hindawi.com/journals/ijrm/2004/546845/abs/ A Magnetorheological Fluid Damper for Rotor Applications
  11. ^ Magnetorheological Damper Laboratory
  12. ^ ALY, Aly Mousaad; Richard Christenson (2008). "On the evaluation of the efficacy of a smart damper: a new equivalent energy-based probabilistic approach". Smart Materials and Structures.