Jump to content

Si-o-se-pol

Coordinates: 32°38′40″N 51°40′03″E / 32.64444°N 51.66750°E / 32.64444; 51.66750
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Rye-96 (talk | contribs) at 20:03, 23 July 2017 (Rewrote, cleaned up, and replaced images.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Si-o-seh-pol
Coordinates32°38′40″N 51°40′03″E / 32.64444°N 51.66750°E / 32.64444; 51.66750
CrossesZayanderud[1]
LocaleIsfahan, Iran
Characteristics
DesignArch bridge, double-deck[1]
MaterialStone and bricks[1]
Total length297.76 metres (976.9 ft)[1]
Width13.75 metres (45.1 ft)[1]
Longest span5.60 metres (18.4 ft)[1]
No. of spans33[1]
History
Construction start1599[1]
Construction end1602[1]
Si-o-se-pol is located in Iran
Si-o-se-pol
Si-o-se-pol (Iran)
Location
Map

The Allahverdi Khan Bridge (Template:Lang-fa), popularly known as Si-o-seh-pol (Template:Lang-fa, "the bridge of thirty-three spans"),[2] is one of the eleven bridges in Isfahan, Iran.[3] It is the longest bridge on the Zayanderud, with a total length of 297.76 metres (976.9 ft), and is one of the most famous examples of Safavid bridge design.

Built between 1599 and 1602, the construction was financed and supervised by the Georgian chancellor of Abbas I, Allahverdi Khan Undiladze. It consists of two superimposed rows of 33 arches. There is a larger base plank at the start of the bridge, under which the Zayanderud flows, supporting a tea house, which is nowadays abandoned.[citation needed]

Transportation

References

  1. ^ a b c d e f g h i Allahverdi Khan Bridge at Structurae
  2. ^ Babaie, Sussan; Haug, Robert (April 5, 2012) [December 15, 2007]. "Isfahan x. Monuments (5) Bridges". In Yarshater, Ehsan (ed.). Encyclopædia Iranica. 1. Vol. XIV. New York City: Bibliotheca Persica Press. Retrieved September 25, 2015.
  3. ^ Wagret, Paul (1977). Iran. Nagel's encyclopedia-guide. Geneva: Nagel Publishers. ISBN 2-8263-0026-1. {{cite book}}: Cite has empty unknown parameter: |coauthors= (help)