Jump to content

Purdy Bridge

Coordinates: 47°23′02″N 122°37′41″W / 47.38389°N 122.62806°W / 47.38389; -122.62806
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Jllm06 (talk | contribs) at 16:04, 20 November 2017 (Consolidated categories into new category). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Purdy Bridge
Purdy Bridge is located in Washington (state)
Purdy Bridge
LocationPurdy, Washington
Coordinates47°23′02″N 122°37′41″W / 47.38389°N 122.62806°W / 47.38389; -122.62806
Built1936
ArchitectCraft, W.H.
Architectural styleOther
MPSHistoric Bridges/Tunnels in Washington State TR
NRHP reference No.82004274 [1]
Added to NRHPJuly 16, 1982

The Purdy Bridge is a continuous hollow-box girder bridge that spans 550 feet (170 m) (with a central span of 190 feet (58 m)) between Henderson Bay, Washington and Burley Lagoon, connecting Purdy, Washington with the Purdy Sand Spit Park and Wauna, Washington. It was built on September 29, 1937,[2] and at the time was the longest continuous box girder bridge in the US, at a cost of $62,000 from a design by Homer M. Hadley.[3] At the time it was built, Purdy Bridge was the first bridge in the United States to utilize a reinforced-concrete box girder design.[4]

The bridge was added to the National Register of Historic Places in 1982.

See also

List of Registered Historic Places in Washington

References

  1. ^ "National Register Information System". National Register of Historic Places. National Park Service. January 23, 2007.
  2. ^ http://www.historylink.org/index.cfm?DisplayPage=output.cfm&File_Id=7133
  3. ^ Holstine 2005, pp. 219–220
  4. ^ Slater p.102

Sources

  • Holstine, Craig; Hobbs, Richard (2005). Spanning Washington: Historic Highway Bridges of the Evergreen State, Washington State University Press, ISBN 0-87422-281-8.
  • Slater, Colleen A. (2007). The Key Peninsula, Arcadia Publishing.