Self-anchored suspension bridge

This article is about self-anchored type suspension bridges. For others, see Suspension bridge types.

Self-anchored suspension bridge

Three self-anchored suspension bridges in Pittsburgh
Ancestor	Suspension bridge
Related	None
Descendant	None
Carries	Pedestrians, automobiles, trucks, light rail
Span range	Medium
Material	Steel rope, steel eyebar, concrete spar, post-tensioned concrete deck
Movable	No
Design effort	high
Falsework required	Sometimes

A self-anchored suspension bridge is a suspension bridge in which the main cables attach to the ends of the deck, rather than to the ground via large anchorages. The design is well-suited for construction atop elevated piers, or in areas of unstable soils where anchorages would be difficult to construct.

• Difference between types of bridges
• 
  Suspension bridge with the main cables attached to the ground (black squares)
• 
  Self-anchored suspension bridge; the main cables are attached to the end of the road deck

The load path of the self-anchored suspension (SAS) bridge converts vertical loads into tension forces in the main cables which are countered by compressive forces in the towers and deck. The system balances forces internally without external anchorage requirements making it suitable for sites where large horizontal forces are difficult to anchor. This is similar to the method used in a tied-arch bridge where arch member compression is balanced by tension in the deck.

History

The self-anchored suspension bridge form originated in the mid-19th century, with a published description by Austrian engineer Josef Langer in 1859 and U.S. Patent No. 71,955 by American engineer Charles Bender in 1867. The form was applied to a handful of Rhine River crossings in Germany during the first half of the twentieth century.

Examples

• The SAS portion of the eastern span replacement of the San Francisco–Oakland Bay Bridge became self-supporting in November 2012, with a 385 m span. This is a unique, half-span as the bridge has only a single tower. It is currently the largest SAS bridge in the world.

• the Konohana Bridge (1990) in Japan and the Yeoungjong Grand Bridge (2000) in South Korea, both have a central span of 300 m.

• The Three Sisters Bridges of Pittsburgh are the earliest examples (1924–28) of this bridge type in the US.

• The Chelsea Bridge (1937) in London, England.

• The Gagarin Street Bridge in Arkhangelsk, Russia.

• 
  Construction falsework on left; force schematic on right
• 
  Asymmetrical single tower half span is a self-supporting SAS bridge -- part of eastern span of San Francisco-Oakland bay bridge

Construction method

Because the primary cables cannot be anchored until the bridge deck is completed, a self-anchored suspension bridge requires some falsework during construction. This falsework may take the form of compression struts (pictured here [1] and in the above diagram) which hold up the main cables (or the parts of them which have already been constructed), allowing the ends of the span to be constructed first in the fashion of a cantilever bridge, or it may be in the form of underdeck falsework, as was employed in the Eastern span replacement of the San Francisco–Oakland Bay Bridge

Cable anchors

Hutsonville Bridge cable anchor detail

As in a traditional suspension bridge, the primary cable type may be multiple parallel independent cables as in the image at right of the Hutsonville Bridge (no longer extant), or eyebars, or a more conventional composite cable.

See also

• Eastern span replacement of the San Francisco–Oakland Bay Bridge

References

• Seventh Street Bridge at pghbridges.com
• List of self-anchored suspension bridges at Structurae.de

External links

• Yeonglong Grand Bridge A two tower, three span self-anchored bridge