Walterdale Bridge
Walterdale Bridge | |
---|---|
Coordinates | 53°31′43″N 113°30′07″W / 53.5286°N 113.502°W |
Carries | 105 Street northbound, pedestrian walkways |
Crosses | North Saskatchewan River |
Locale | Edmonton, Alberta, Canada |
Official name | Walterdale Bridge |
Maintained by | City of Edmonton |
Characteristics | |
Total length | 230 metres (750 ft)[1] |
History | |
Opened | 2017 |
Location | |
(Previous) Walterdale Bridge | |
---|---|
Coordinates | 53°31′43″N 113°30′07″W / 53.5286°N 113.502°W |
Carries | 105 Street northbound, pedestrian walkway |
Crosses | North Saskatchewan River |
Locale | Edmonton, Alberta, Canada |
Official name | Walterdale Bridge (1967–2017) |
Other name(s) |
|
Maintained by | City of Edmonton |
Characteristics | |
Design | Steel truss with steel grating deck |
Total length | 214.2 metres (703 ft) |
History | |
Opened | 1913 |
Closed | 2017 |
Replaced by | New Walterdale Bridge |
Location | |
The Walterdale Bridge is a suspension bridge across the North Saskatchewan River in Edmonton, Alberta, Canada. It replaced the previous Walterdale Bridge in 2017. The new bridge has three lanes for northbound vehicular traffic and improved pedestrian and cyclist crossings.
The previous Walterdale Bridge (formerly called the 105 Street Bridge, renamed in 1967)[2] was a steel grating-decked truss bridge that spanned the North Saskatchewan River in Edmonton, Alberta, Canada. It was built in 1913 by the Dominion Bridge Company and was named after John Walter, an early settler who ran a ferry at this approximate location.[3] The neighbourhood Walterdale at this location was also named after John Walter.[4]
Replacement
Construction began on a replacement bridge in early 2013 and was scheduled to be completed in late 2015; however, it did not open (two lanes only) until September 18, 2017. The contractor faced over $10 million in penalties for the delay. The new bridge has three lanes for northbound vehicular traffic and improved pedestrian and cyclist crossings. The old bridge was demolished and removed. Roadway and trail links north and south of the bridge were partially complete as of 19 September 2017[update],[5] and the pedestrian access and third lane opened on September 29, 2017.[6]
The new bridge is located east of the original bridge, and is supported by concrete thrust blocks on the banks of the river, eliminating the need for piers. The arches are 56 metres (184 ft) tall.[7]
-
Old Walterdale Bridge with early work for new one barely visible on the banks, March 2013.
-
The replacement bridge under construction, photo from direction of water, May 2016.
-
Cranes and nearly finished structure of new bridge with surroundings
(September 7, 2016). -
Old and new Walterdale bridges. May 25, 2017
References
- ^ Walterdale Bridge - The archway. Retrieved 10 March 2018.
- ^ Edmonton Historical Board, City of Edmonton (2004). Naming Edmonton: From Ada to Zoie. University of Alberta Press. p. 327. ISBN 0-88864-423-X.
- ^ Ivany, Kathryn (2004). Historic Walks of Edmonton. Red Deer Press, Calgary. pp. 25–31. ISBN 0889952981.
- ^ "John Walter Historic Area". Parks Canada. Retrieved April 25, 2014.
- ^ Parrish, Julia (September 18, 2017). "Walterdale Bridge contractor could pay up to $12M in fines for delays: City". CTV News Edmonton. Retrieved September 19, 2017.
- ^ Kornik, Slav (September 29, 2017). "Edmonton pedestrians can now use new Walterdale Bridge". Global News. Retrieved September 30, 2017.
- ^ "Walterdale Bridge Features :: City of Edmonton". City of Edmonton. Archived from the original on July 6, 2014. Retrieved October 19, 2015.