XTI TriFan 600
XTI TriFan 600 | |
---|---|
File:XTI trifan 600.png | |
Role | VTOL aircraft |
National origin | United States |
Designer | XTI Aircraft Company |
Status | Under development |
The XTI TriFan 600 is a vertical takeoff and landing aircraft designed by Denver-based XTI Aircraft Company.
Development
In June 2017, a 65%-scale proof-of-concept began fabrication at Placerville Airport, CA, to validate its configuration. Trek Aerospace manufactured the ducts and assembled the 65%-scale demonstrator, only powered by an XTI-Trek Aerospace battery pack, and MGM Compro, based in Zlín, Czech Republic, supplied its electric motors and controllers. It was completed in December 2018 and unveiled in January 2019.[1]
Between January and April 2019, it was ground tested to validate the electric motors, battery systems, ducts, propellers, flight controls, systems and instrumentation. It first flew tethered on May 2, 2019, and conducted multiple controlled hovers. Untethered hovering, forward wing-borne flight, and the transition between should follow and subsequent testing is scheduled in Deseret UAS test site near Tooele, Utah.[1]
Design
The TriFan 600 is a six-seat Fixed-wing aircraft powered by three ducted fans: two pivoting on the wing and one in the aft fuselage, lifting the aircraft in VTOL. It will have a 37.7 ft (11.5 m) wingspan and a 38.7 ft (11.8 m) length, with single 6 ft (1.8 m) diameter propellers in the wing ducts and two 5 ft (1.5 m) diameter co-axial propellers in the aft duct.[1]
The hybrid electric propulsion system include a single 1,000 shp (745 kW) Honeywell HTS900 turboshaft driving three generators, powering two 350 hp (260 kW) electric motors for the wing ducts and one each for the aft propellers. It should reach 340 kn (630 km/h) and cross 650 nmi (1,200 km) in VTOL operations or 1,200 nmi (2,200 km) from a runway.[1]
See also
Aircraft of comparable role, configuration, and era
References
- ^ a b c d "XTI TriFan 665 flies!". Electric VTOL News. Vertical Flight Society. May 8, 2019.