Jump to content

EMD SD90MAC

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 65.92.3.143 (talk) at 03:59, 12 December 2019. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

EMD SD90MAC
UP 8540, an SD90MAC Phase II
Type and origin
Power typeDiesel-electric
BuilderElectro-Motive Diesel (EMD)
Total produced400
Specifications
Configuration:
​
 • AARC-C
Gauge4 ft 8+1⁄2 in (1,435 mm)
Wheel diameter42 in (1,067 mm)
Length80 ft 2 in (24.43 m)
Loco weight415,000 lb (188,000 kg)
Fuel capacity5,000 US gal (19,000 L; 4,200 imp gal)
Sandbox cap.40 cu ft (1.1 m3)
Prime moverEMD 16-710 G3B or EMD 16-265H
RPM range225-1000 rpm
Engine typeV16 diesel
Traction motors6 Siemens 1TB2830 AC motors
Cylinders16
Cylinder size10.45 in × 11.80 in (265 mm × 300 mm)
Performance figures
Power output4,300 hp (3,210 kW) or 6,000 hp (4,470 kW)
Tractive effortsmall engine: 185,000 lbf (822.92 kN) starting, 147,000 lbf (653.89 kN) continuous
large engine: 200,000 lbf (889.64 kN) starting, 165,000 lbf (733.96 kN) continuous

The EMD SD90MAC is a 6,000 hp (4,470 kW)[1] C-C diesel-electric locomotive produced by General Motors Electro-Motive Division. It is, with the SD80MAC, one of the largest single-engined locomotives produced by EMD, surpassed only by the dual-engined DDA40X.

The SD90MAC's features include radial steering trucks with AC traction motors and an isolated safety cab which is mounted on shock absorbers to lessen vibrations in the cab. The SD90MAC, like the SD80MAC, SD70ACe, and SD70M-2, has a wide radiator section, nearly the entire width of the locomotive, which along with their size makes them easy to spot.

As of 2019, some SD90MACs are still in service on the Union Pacific. Norfolk Southern had rostered 110 SD90MAC locomotives purchased or traded from the Union Pacific or the CIT Group respectively, that have now all been rebuilt as EMD SD70ACU locomotives. Canadian Pacific has also opted to convert their small fleet of long-stored SD90MACs into SD70ACUs as well.

History

Union Pacific SD9043MAC locomotive No. 8027

The SD90MAC was introduced in 1995, along with the SD80MAC locomotives. The SD90MAC was designed to utilize the new 16-cylinder H-engine, while the SD80MAC was designed to use the 20-cylinder version of the existing 710G engine. However, technical problems with the 6,000 horsepower (4,500 kW) engine resulted in the first locomotives being shipped with 4,300 hp (3,210 kW) 16-cylinder 710G engines, making them similar to the SD70MAC's. These locomotives were given the informal model designation SD9043MAC by railroads that purchased them with the option to re-engine them with 6,000 hp (4,470 kW) engines when they became available.[2] This upgrade program, however, was never taken advantage of by SD90MAC buyers due to reliability issues with the newer engine. Over 400 SD90MAC locomotives fitted with the 4,300 hp (3,210 kW) 710 engine were built.

In 1996, Electro-Motive Diesel entered full production on their 6,000 hp (4,470 kW), 16-cylinder H-engine, and all SD90MACs made from then on used that for its prime mover. Locomotives fitted with this engine are sometimes referred to as SD90MAC-H locomotives. Later versions of the SD90MAC-H feature a Phase II cab, with a new nose which offers higher visibility from the cab than the old nose. The SD90MAC-H did not prove popular with railroads and less than 70 were built, including Electro-Motive Diesel demonstrator units. Since the SD90MAC-H had such a large prime mover, it didn't offer the same operational flexibility as smaller units, limiting its possible customer base to only the largest railroads. Also, since the H-engine was a new design it hadn't reached the same level of reliability as EMD's previous engine. The low reliability on such a large engine was an especially bad combination since the loss of one engine in a train meant the loss of a larger percentage of pulling power than had a smaller engine failed. In the end the SD90MAC-H was only delivered to two railroads, the Union Pacific Railroad and the Canadian Pacific Railway.[2] The Canadian Pacific locomotives were part of an earlier order for 710-engine equipped SD90MAC locomotives that was still in production when Electro-Motive Diesel switched over to the H-engine.

Electro-Motive Diesel also tried offering a lower-power version of the SD90MAC with a 12-cylinder engine called the SD89MAC, but none were produced other than the prototype.

Specifications

Prime mover (EMD 710):

  • EMD V16 710G3B
  • Power Output - 4,300 hp or 3,210 kW
  • Idle - 200 rpm
  • Full Speed - 950 rpm

Prime mover (EMD 265):

  • EMD V16 EMD GM16V265
  • Power Output - 6,000 hp or 4,470 kW at 1000 rpm
  • Idle - 200 rpm
  • Full speed - 1000 rpm

Traction motors:

  • 6 Siemens 1TB2830 AC motors mounted 3 each on 2 HTCR-2 radial self-steering trucks.
  • Rated output - 855 hp or 638 kW
  • Gearing - 83:16
  • Wheel size - 45 in (1,143 mm)
  • Max revolutions - 3,435 rpm
  • Starting torque - 16,300 N⋅m or 12,022 lbf⋅ft
  • Continuous torque - 12,900 N⋅m or 9,515 lbf⋅ft
  • Maximum voltage - 2,183 V

Performance (parenthesis indicate H-Engine equipped specifications):

  • Maximum speed - 80 mph (130 km/h)
  • Starting tractive effort - 185,000 lbf (820 kN) (200,000 lbf (890 kN))
  • Continuous tractive effort - 147,000 lbf (650 kN) (165,000 lbf (730 kN))
  • Braking effort - 115,000 lbf (510 kN)[3]
  • Weight - 210 short tons (188 long tons; 191 t)/420,000 lb or 190,500 kg[4]

Fleet rosters

Canadian Pacific

CP 9112 being transported south on the CP Emerson Subdivision, to be converted to an SD70ACU.
  • 9100-9160 (SD9043MAC): Units were at one time up for sale in "as is" condition, but no buyer was ever found. Some units had been intermittently placed into freight service to help combat motive power shortages.[1] 30 of them will be rebuilt in 2019 as SD70ACUs and renumbered 7000-7029.[5] It was later announced that the order would be upped to 60 units in total, using the remainder of the 58 usable cores from the long-stored SD90MAC fleet and buying two SD90MACs from the Union Pacific to make up the difference.
  • 9300-9303 (SD90MAC-H): These were scrapped in Lachine, QC. [2]

CEFX

  • 100-139 (SD9043MAC) (Lease Fleet) 10 units traded to NS for 15 MP15DCs.

EMLX

Indiana Rail Road

  • 9001-9013, 9025 (SD9043MAC) (Long-term lease from CEFX).

Norfolk Southern

  • 7229-7338 (SD9043MAC); NS purchased 100 units in September 2014 from EMD/Progress Rail. Those units are ex-UP. 10 units were acquired from CEFX in June 2016, in exchange for 15 MP15DCs. All units have been converted into SD70ACUs.

Union Pacific:

  • 8000-8308 (SD9043MAC); most of them were renumbered 3470-3775 to make room for new GE ES44ACs. Both the Norfolk Southern and Canadian Pacific have purchased locomotives from Union Pacific's fleet for SD70ACu rebuilds, in September 2014 Norfolk Southern purchased 100 of these and in 2019 Canadian Pacific purchased two of these.
  • 8500-8561 (SD90MAC-H. Fleet Retired, some after less than 5 years of service. 8500, 8523-8561 to EMLX Lease fleet, 8501-8522 renumbered 8911-8931. Retired in late 2008-2009. Sold to Metro East Industries in Alorton, Illinois. Scrapped mid to late 2009)

Fortescue Metals Group

  • 901-904 (SD90MAC-H)
    • 901 - 265H-engine was replaced with a 710 engine Tier 1 on March/13 at FMG Thomas Yard - Port Hedland / Western Australia
    • 902 - 265H-engine was replaced with a 710 engine Tier 1 on Nov/14 at FMG Thomas Yard
    • 903 - 265H-engine was replaced with a 710 engine Tier 1 on October/14 at FMG Thomas Yard
  • 905-909 (SD9043MAC): Rebuilt from SD90MAC-H for use in Australia at the Juniata Shops[6]
    • PRLX8527 is now FMG 905
    • PRLX8530 is now FMG 906
    • PRLX8531 is now FMG 907
    • PRLX8541 is now FMG 908
    • PRLX8554 is now FMG 909
  • 910-917 (SD90MAC-PII): Rebuilt for use in Australia at Mayfield, KY shop
  • All locomotives in this series are currently stabled at Thomas Yard - Port Hedland.
    • All 8 locos unloaded at Thomas Yard in December/14
    • PRLX8553 is now FMG 910
    • PRLX8548 is now FMG 911
    • PRLX8550 is now FMG 912
    • PRLX8557 is now FMG 913
    • PRLX8525 is now FMG 914
    • PRLX8538 is now FMG 915
    • PRLX8543 is now FMG 916
    • PRLX8547 is now FMG 917

Current status

Norfolk Southern Railway SD70ACU No. 7305. The SD70ACU is part of Norfolk Southern's SD90MAC rebuild program.

As of January 2005, the SD90MAC is no longer in production due to the Environmental Protection Agency's Tier 2 locomotive emission regulations, although EMD may be able to get the H-engine approved at some later date. However, China recently announced an order for 300 JT56ACe locomotives, which also use the H-Engine as its prime mover. A portion of the locomotives will be assembled in kit form by China's own Dalian Locomotive Works. These units were reportedly capable of meeting the EPA's strict regulations and began delivery in the latter half of 2007.

Due to reliability issues, FMG units 910 to 917 are stored and deemed not be used. They were purchased to be used as "slave" units, and they were more offline than they were in use. FMG is looking to fit 910-917 to the same specifications as 901-909. 916 is currently in the shops.

On 1 August 2008 Union Pacific Railroad announced that it would be retiring 21 of the SD90MAC locomotives. Common parts will be used to maintain the railroad's 710-engined SD90MAC fleet. The 265H prime mover will be cut up or exported. The only part that is non-reusable will be the frame. These units, in the 8900 series will be removed from storage in Denver, and be sent to East St. Louis, Ill., in small batches to be dismantled. As of 2019, Union Pacific still operates some of the remaining SD9043MACs, which sport new numbers and UP wings on the cab.

UP 3567, an SD9043MAC still in regular service in 2019

Canadian Pacific's SD90MAC-H locomotives 9300-9303 (listed as SD90MAC6000s) were up for tendered sale in 2009. The bidding ended 31 March 2010. While they were originally thought to be shipped overseas, they were eventually moved to Quebec for scrapping.

Canadian Pacific's SD90MAC locomotives, numbered in the 9100-9160 series had been in long term storage in Winnipeg, Manitoba for much of the 2010-decade. With three units, the 9129, 9133 and 9138 being scrapped in November 2012 due to errors in preparing them for long term storage. The entire fleet had been put up for sale in November 2012 and again in January 2013 with no offers being made. These units remained stored until the Winter of 2018 when at first 30, then all 58 remaining units entered a rebuild program to be converted into SD70ACUs.

In September 2014, Norfolk Southern purchased 100 4300 hp SD9043MACs from Union Pacific with the intent to rebuild them into SD70ACUs at the Juniata Shops. The last 4 SD90MACs were taken delivery to Norfolk Southern on October 3, 2015 running parallel to Western Ave in Chicago IL.

On 26 June 2018 it was announced that CP had contacted Progress Rail (corporate parent to EMD) to rebuild 30 of their SD90MAC fleet into SD70ACUs, much like the Norfolk Southern had previously done with a second-hand SD90MAC fleet. In 2019, an additional 30 units were added to the order for a total of 60 SD70ACU rebuilds, with 28 coming from the remainder of Canadian Pacific's SD90MAC fleet and the other two purchased from Union Pacific's SD90MAC fleet.

In 2015 Cummins rebuilt a single SD90MAC with its QSK95 engine, designed to meet Tier 4 emissions standards. Sygnet Rail Technologies and Brookville Equipment Corporation performed the conversion. The rebuild was designated HTL4200AC. The locomotive, numbered CECX No. 1919, had been Union Pacific No. 8559.[7]

See also

References

  1. ^ https://web.archive.org/web/20011210220002/http://www.gmemd.com/en/locomotive/na_freight/sd90mac/index.htm
  2. ^ a b Johnston, Howard (2005). Jane's Train Recognition Guide. London: Collins. pp. 440–441. ISBN 0-06-081895-6.
  3. ^ Shop, The Diesel. "EMD SD90MAC Data Sheet". The Diasel Shop. The Diesel Shop. Retrieved 13 August 2017.
  4. ^ http://www.sze.hu/~szenasy/VILLVONT/Diesel-Electric_Loco_SD90MAC_EN.pdf
  5. ^ https://www.railwayage.com/mechanical/progress-rail-to-upgrade-cp-units/
  6. ^ a b Clark, Peter (2012). An Australian Locomotive Guide. Rosenberg Publishing. p. 220. ISBN 9781921719554.
  7. ^ "Cummins Tier 4 freight locomotive headed to Indiana for testing". Trains. 10 November 2015. Retrieved 11 November 2015. (subscription required)
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=EMD_SD90MAC&oldid=930390111"