Jump to content

Liquid organic hydrogen carrier

From Wikipedia, the free encyclopedia
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Schematic of an LOHC process for storing electrical energy.

Liquid organic hydrogen carriers (LOHC) are organic compounds that can absorb and release hydrogen through chemical reactions. LOHCs can therefore be used as storage media for hydrogen. In principle, every unsaturated compound (organic molecules with C-C double or triple bonds) can take up hydrogen during hydrogenation. The sequence of endothermal dehydrogenation followed by hydrogen purification is considered as the main drawback which limits the overall efficiency of the storage cycle.[1] LOHC shipping without heat recycling has an energy efficiency of 60-70%, depending on the dehydrogenation rate, which is equivalent to liquid hydrogen shipping. With heat recycling, the energy efficiency increase to 80-90%.[2] [3]

In 2020, Japan built up the world's first international hydrogen supply chain between Brunei and Kawasaki City utilizing toluene-based LOHC technology.[4] Hyundai Motor invests in the development for stationary and on-board LOHC-systems.[5]

Principle of LOHC-based hydrogen storage

To absorb hydrogen, the dehydrated form of LOHC (an unsaturated, mostly aromatic compound) reacts with the hydrogen in a hydrogenation reaction. The hydrogenation is an exothermic reaction and is carried out at elevated pressures (approx. 30-50 bar) and temperatures of approx. 150-200°C in the presence of a catalyst. The corresponding saturated compound is thereby formed, which can be stored or transported under ambient conditions. If the hydrogen is needed again, the now hydrogenated, hydrogen-rich form of the LOHC is dehydrogenated, with the hydrogen being released again from the LOHC. This reaction is endothermic and takes place at elevated temperatures (250-320°C) again in the presence of a catalyst. Before the hydrogen can be used, it may have to be cleaned of LOHC steam. To increase efficiency, the heat contained in the hot material flow exiting the release unit should be transferred to the cold material flow consisting of hydrogen-rich LOHC entering the release unit in order to keep the energy requirement for preheating it before the reaction low. In particular, the heat released by the hydrogenation reaction when the hydrogen is absorbed can in principle be used for heating purposes or as process heat.[6]

Requirements for LOHC materials

Determination of the degree of hydrogenation


Direct LOHC fuel cell

An alternative, innovative and highly promising approach to convert LOHC-bound hydrogen into electricity is proposed recently.[1] The new unloading sequence consists of an almost thermoneutral catalysed transfer hydrogenation step converting ketone (acetone) to secondary alcohol (2-propanol) by contacting hydrogen-rich carrier (H18-DBT), and the secondary alcohol is then directly consumed in a PEMFC (direct isopropanol fuel cell; DIPAFC).[7] It is a CO2 emission-free, external energy input-free, and safe sequence with no molecular hydrogen at any point during hydrogen releasing. The "direct LOHC fuel cell" based on the LOHC-DIPAFC coupling concept is a very attractive solution for the on-board generation of electric energy in mobile applications,[1] and it's driving researchers to focus on the topic.[8][original research?]

Examples of LOHC materials

Toluene / methylcyclohexane

As early as the 1980s there were attempts with toluene, which is converted to methylcyclohexane by hydrogenation.[9] The basic idea of this variant came from the USA in 1975 and was further developed in 1979 at the Paul Scherrer Institute in Switzerland together with the ETH Zurich. Even then, the prototype of a truck was built that was powered by hydrogen from the dehydrogenation of methylcyclohexane.[10][11] The entire circuit is known as the Methylcyclohexane-Toluene-Hydrogen system (MTH).[12]

Gravimetric hydrogen storage densities of methylcyclohexane and toluene (MCH-TOL) are 6.1 wt%, or volumetric hydrogen storage densities at 47 kg/m3 in ambient conditions,[13][14] corresponding to 5.5 MJ/L hydrogen.[15] Although MCH is reasonably stable (enthalpy of dehydrogenation: 68 kJ/mol), it must be dehydrogenated at temperatures of 350 °C and hydrogenated at 150 °C.[13]

Chiyoda (Japan) uses MCH-TOL as the hydrogen carrier for its SPERA hydrogen delivery business.[16] According to reports for Chiyoda's demonstration plant, which has a production rate of 50 Nm3 per hour, the dehydrogenation of MCH happens at 350 °C and with a Pt/Al2O3 catalyst, with an MCH conversion rate greater than 95% and toluene selectivity higher than 99.9%. For the (de)hydrogenation of TOL/MCH, several catalysts including Ni, Pt group metals, and bimetallic Pt/Mo on different support materials have also been investigated.[3]

N-ethyl carbazole

Dibenzyltoluene

Dibenzyltoluene (DBT) is studied to circumvent the high melting temperature of N-ethylcarbazole (liquid phase between 68 and 270°C [17]) and the high vapor pressure of toluene. Vapor pressure at 40°C of toluene is 7880 Pa and methylcyclohexane is 10900 Pa while DBT is 0.07 Pa and perhydro-dibenzyltoluene (H18-DBT) is 0.04 Pa.[17] This substance is currently being used as a heat transfer oil, for example, under the trade name Marlotherm SH.[18] Temperatures of approx. 300°C are necessary for dehydrogenation. However, dibenzyltoluene is superior to other carrier substances in many physico-chemical properties.[19][20]

DBT hydrogenate into H18-DBT when exposed to platinum group metals at 140°C and can dehydrogenate at temperatures between 270°C and 320°C. The resulting DBT/H18-DBT mixture has a notable hydrogen storage capacity of 6.2wt%, is minimally toxic, and high thermal stability with ignition temperature at 450°C.[17][3][21] While the storage capacity is 6.2 wt% and the energy density is 1.9 kWh/L, considering the de-hydrogenation limitation the storage capacity is 6.0 wt% and the energy density 1.8 kWh/L. The price for dibenzyltoluene is around 4 €/kg.[17] DBT can be hydrogenated with hydrogen-containing gas mixtures which is especially attractive for large-scale applications because it can be integrate into industrial processes that already produce such gas mixtures.[22] Hydrogenation reactions can be done with catalysts like Pt and Ru, supported by Al2O3. For the dehydrogenation, Pd and Ru catalysts supported by carbon are used.[17] Companies like Hydrogenious Technologies GmbH in Germany and HySA Infrastructure in South Africa have adopted the DBT/H18-DBT system as LOHCs. The DBT/H18-DBT cost for the components for the hydrogenation process is $0.005 million USD/tonne for materials, $0.134 million USD/tonne for reactors, and $0.003 million USD/tonne for storage tanks.[3]

Other potential LOHCs

Implementation

References

  1. ^ a b c G. Sievi, D. Geburtig, T. Skeledzic, A. Bösmann, P. Preuster, O. Brummel, ... & J. Libuda (2019). Towards an efficient liquid organic hydrogen carrier fuel cell concept. In: Energy & Environmental Science, 12(7), 2305-2314.
  2. ^ Wang, Hewu; Zhou, Xin; Ouyang, Minggao (26 October 2016). "Efficiency analysis of novel Liquid Organic Hydrogen Carrier technology and comparison with high pressure storage pathway". International Journal of Hydrogen Energy. 41 (40): 18062–18071. doi:10.1016/j.ijhydene.2016.08.003.
  3. ^ a b c d Abdin, Zainul; Tang, Chunguang; Liu, Yun; Catchpole, Kylie (September 2021). "Large-scale stationary hydrogen storage via liquid organic hydrogen carriers". iScience. 24 (9): 102966. Bibcode:2021iSci...24j2966A. doi:10.1016/j.isci.2021.102966. PMC 8382998. PMID 34466789.
  4. ^ ‘World’s first international hydrogen supply chain’ realised between Brunei and Japan, RECHARGE, 2020-04-27.
  5. ^ Hyundai Motor invests in Hydrogenious LOHC Technologies, Bioenergy International, 2020-06-04.
  6. ^ D. Teichmann, K. Stark, K. Müller, G. Zöttl, P. Wasserscheid, W. Arlt: Energy storage in residential and commercial buildings via Liquid Organic Hydrogen Carriers (LOHC). Energy & Environmental Science, 2012, 5, 5, 9044–9054, doi: 10.1039/C2EE22070A.
  7. ^ 2-propanol fuel cells, HI ERN.
  8. ^ New systems for hydrogen chemical storage without molecular hydrogen.
  9. ^ M. Taube, P. Taube, "A liquid organic carrier of hydrogen as a fuel for automobiles", In: Hydrogen energy progress; Proceedings of the Third World Hydrogen Energy Conference, Tokyo, Japan, June 23-26, 1980. Volume 2. (A81-42851 20-44) Oxford and New York, Pergamon Press, 1981, S. 1077–1085.
  10. ^ M. Taube, D. Rippin, D.L. Cresswell, W. Knecht, N. Gruenenfelder, "A system of hydrogen-powered vehicles with liquid organic hydrides", International Journal of Hydrogen Energy, 1983, 8, 3, 213-225, doi: 10.1016/0360-3199(83)90067-8.
  11. ^ M. Taube, D. Rippin, W. Knecht, D. Hakimifard, B. Milisavljevic, N. Gruenenfelder, "A prototype truck powered by hydrogen from organic liquid hydrides", International Journal of Hydrogen Energy, 1985, 10, 9, 595-599, doi: 10.1016/0360-3199(85)90035-7.
  12. ^ Übersichtsbeitrag Energiespeicherung als Element einer sicheren Energieversorgung. In: Chemie Ingenieur Technik. 87, 2015, S. 17, doi:10.1002/cite.201400183, dort S. 49. - Joint GCC-JAPAN Environment Symposia in 2013.
  13. ^ a b Andersson, Joakim; Grönkvist, Stefan (May 2019). "Large-scale storage of hydrogen". International Journal of Hydrogen Energy. 44 (23): 11901–11919. doi:10.1016/j.ijhydene.2019.03.063.
  14. ^ Muthukumar, P.; Kumar, Alok; Afzal, Mahvash; Bhogilla, Satyasekhar; Sharma, Pratibha; Parida, Abhishek; Jana, Sayantan; Kumar, E Anil; Pai, Ranjith Krishna; Jain, I. P. (24 May 2023). "Review on large-scale hydrogen storage systems for better sustainability". International Journal of Hydrogen Energy. 48 (85): 33223–33259. doi:10.1016/j.ijhydene.2023.04.304. S2CID 258898986.
  15. ^ Usman, Muhammad R.; Cresswell, David L. (January 2013). "Options for on-Board Use of Hydrogen Based on the Methylcyclohexane–Toluene–Hydrogen System". International Journal of Green Energy. 10 (2): 177–189. Bibcode:2013IJGrE..10..177U. doi:10.1080/15435075.2011.647168. S2CID 95637876.
  16. ^ "What is "SPERA HYDROGEN" system?". CHIYODA CORPORATION.
  17. ^ a b c d e Niermann, Matthias; Beckendorff, Alexander; Kaltschmitt, Martin; Bonhoff, Klaus (8 March 2019). "Liquid Organic Hydrogen Carrier (LOHC) – Assessment based on chemical and economic properties". International Journal of Hydrogen Energy. 44 (13): 6631–6654. doi:10.1016/j.ijhydene.2019.01.199. S2CID 104322951.
  18. ^ "Marlotherm SH Heat Transfer Fluid | Eastman".
  19. ^ N. Brückner, K. Obesser, A. Bösmann, D. Teichmann, W. Arlt, J. Dungs, P. Wasserscheid, Evaluation of Industrially Applied Heat-Transfer Fluids as Liquid Organic Hydrogen Carrier Systems, In: ChemSusChem, 2014, 7, 229–235, doi: 10.1002/cssc.201300426.
  20. ^ C. Krieger, K. Müller, W. Arlt: Energetische Analyse von LOHC-Systemen als thermochemische Wärmespeicher. In: Chemie Ingenieur Technik. 86, 2014, S. 1441, doi:10.1002/cite.201450058.
  21. ^ Usman, Muhammad R. (1 October 2022). "Hydrogen storage methods: Review and current status". Renewable and Sustainable Energy Reviews. 167: 112743. doi:10.1016/j.rser.2022.112743. S2CID 250374146.
  22. ^ Jorschick, Holger; Bösmann, Andreas; Preuster, Patrick; Wasserscheid, Peter (9 October 2018). "Charging a Liquid Organic Hydrogen Carrier System with H 2 /CO 2 Gas Mixtures". ChemCatChem. 10 (19): 4329–4337. doi:10.1002/cctc.201800960. S2CID 105479916.
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Liquid_organic_hydrogen_carrier&oldid=1259480999"