Talk:Zinc–carbon battery
This article is rated C-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | ||||||||||||||||||||||||||||||||||||||
|
Messed up
This thing is totally messed up! When I finish my finals I'll clean it up. Kr5t 22:37, 21 May 2006 (UTC)
- If you have a chance, could you also re-write the intro? When the article was first created,[1] the text was simply copied from the World Book Encyclopedia. Most of that text is still there. It's not a lot, but it'd be better if this were entirely written by our editors, rather than stolen from another encyclopedia. -Will Beback 20:18, 8 June 2006 (UTC)
Still seems like the first para is messed up Linlithgow (talk) 12:37, 26 August 2021 (UTC)
- Seems good now Linlithgow (talk) 14:44, 15 August 2022 (UTC)
Content from dry cell
It appears that people have confused zinc-carbon batteries, a type of dry cell battery, with dry cells. Besides zinc-carbon batteries, there are other types of dry cells, the most common being batteries. For this reason, I am posting the content from that dry cell here in case any of it can be worked into the this (zinc-carbon battery) article. I added an equals sign to allow of the sections so that it would only take up one section in this talk page. Also, I made the image into a link to the image. -- Kjkolb 07:40, 4 August 2006 (UTC)
- the link "batteries" is to Alkaline_battery, fwiw Linlithgow (talk) 14:45, 15 August 2022 (UTC)
A dry cell, also known as a Leclanché cell or a zinc-carbon battery, is a form of primary electrochemical cell that supplies electrical energy at small currents. Dry cells range in size between large flashlight batteries and tiny watch batteries but the basic construction is the same: a zinc cup lined with paper filled with an electrolyte paste with a graphite (carbon) rod in the center terminated with a metal cathode at the top.
Usage
Because it was compact and reliable, the dry cell was commonly used to power portable electronic devices such as radios and flashlights until it was replaced by alkaline cells which solve many of the dry cell's shortcomings. Everyday use of the term “battery” usually is a reference to either the dry or the alkaline cell.
Chemistry
Like all electrochemical cells, the dry cell gets its electrical energy from an internal chemical reaction which takes the form of two half-cell reactions. The electrolyte in the cell consists of ammonium chloride, manganese(IV) oxide, finely granulated carbon and an inert filler which is usually starch. The ammonia from the ammonium ions forms the complex ion Zn(NH3)42+ with the Zn2+ preventing buildup of Zn ions which would result in reduction of the potential of the cell.
In standard electrochemical cell notation the dry cell looks like:
- Zn(s)|ZnCl2(aq), NH4Cl(aq)|MnO(OH)(s)|MnO2(s)|graphite
With a cell potential of approximately 1.5 volts and the following half-cell reactions
At the anode (-):
- Zn(s) → Zn2+(aq) + 2 e-
- followed by Zn2+(aq) + 2 NH3(g) → [Zn(NH3)2]2+(aq)
At the cathode (+):
- MnO2(s) + H2O(l) + e- → MnO(OH)(s) + OH-(aq)
- followed by NH4+(aq) + OH-(aq) → H2O(l) +NH3(g)
Gas absorption
The reaction is further complicated by the production of two gaseous products in the reduction of ammonium ions:
- 2 NH4+(aq) + 2 e- → 2 NH3(g) + H2(g)
These products must be absorbed within the cell if gas pressure is not to build up. Two further reactions within the paste electrolyte absorb the gas. Zinc chloride reacts with ammonia to form solid zinc ammonium chloride and manganese dioxide reacts with hydrogen to form solid dimanganese trioxide and water.
- ZnCl2(aq) + 2 NH3(g) → Zn(NH3)2Cl2(s)
- 2 MnO2(s) + H2(g) → Mn2O3(s) + H2O(l)
The cell initially produces about 1.5 volts, but this decreases as the reaction goes on because the moist paste is not completely mobile, so the electrolyte near the electrodes can be completely reacted, inhibiting further reaction, while un-reacted electrolyte is left in the body of the cell.
Practical considerations
Dry cells have several advantages over wet cells such as a lead acid battery:
- They can be made very compact
- They do not require liquid water such as sulfuric acid (H2SO4), so they are more easily contained and transported and are lighter weight
- The chemicals involved are relatively safe
- Dry cells are fairly inexpensive to produce.
However, there are also several disadvantages to the dry cell:
- As a primary cell, dry cells cannot be recharged and must be discarded after their potential has dropped below a useful level.
- As mentioned earlier, the paste electrolyte is not completely mobile, so the reagents cannot be used completely.
- The zinc anode of the battery is also its outer case. As the reaction goes on, the anode is consumed and becomes thinner and thinner, until eventually the cell starts to leak. The leaked water and electrolyte make the outside of the cell sticky, and can damage the electronic device that the cell is powering.
- Shelf life is the greatest disadvantage of the dry cell, however. Even when not in use, the zinc electrode reacts with and is corroded by the electrolyte, limiting the shelf life of the cell to at most 1.5 years. Its potential decreases as well, especially in cold conditions.
Because of these shortcomings, dry cells have now been replaced by alkaline cells, which are similar to dry cells except that they use an alkaline electrolyte which the zinc electrode doesn't readily react with when energy is not being drawn from the cell.
History
An early dry cell was invented in 1802 by Johann Ritter.
The dry cell as we know it today was invented by Georges Leclanché in 1866. His design used a positive electrode consisting of a mixture of manganese dioxide and carbon in a porous pot. This and a zinc rod which served as the negative electrode were then immersed in an ammonium chloride solution. This became known as Leclanché's "wet" cell. Leclanché original design was prone to breakage but was improved by later engineers.
J.A. Thiebaut patented the first cell combining both the negative electrode and porous pot into a zinc cup in 1881; but Carl Gassner is credited with producing the first commercially successful dry cell in 1888 (patent 1887).
In 1909 the tungsten filament provided the impetus to use the dry cell to power the first battery-operated flashlights.
See also
- Zinc-carbon battery (much more complicated and detailed, perhaps even clearer, explanation of chemical process inside a dry cell)
- Wet cell
- Georges Leclanché
- Galvanic cell
- Electrochemical cell
References
Dry cell chemisty
- Chemsoc Timeline, Dry Cell Battery [2]
- HyperPhysics, Batteries [3]
- University of Hawaii, The "Dry-Cell" Battery [4]
History
- "Georges Leclanché" biography at Corrosion Doctors
- "Johann Ritter" biography at Corrosion Doctors
- "Galvanic Battery" at Today in Science History
Zinc-carbon dry cell components
The main components:
- zinc- anode
- carbon rod- cathode
- paste of MnO2, NH4Cl, H2O as the electrolyte
- Porous paper- separates the paste from the Zn casing, also allows for the diffusion of ions.
- wax seal prevents the evaporation of water.
An anonymous user made this comment on the dry cell talk page. I moved it here, since it does not apply to dry cells. The comment was modified slightly. -- Kjkolb 08:10, 4 August 2006 (UTC)
Amendment Made to Clear up Confusion of Definitions of Dry Cell and Zinc-Carbon Cell
I have now edited the dry cell page to form a link and make it a bit clearer that a zinc-carbon battery is one example of a dry cell. I hope I have made this article a little clearer to readers by doing so. Also the carbon rod is not really the cathode but is merely a collector. With reference to the above comments the manganese dioxide and carbon powder acts as the cathode as stated in the original wikipedia article zinc-carbon battery! By a former physics teacher 14 50 1st November 2006 I agree: 65 years ago dry cell typically refered to a much scaled up version of the AA cell. I believe they were otherwise identical, except they had thumb nut terminals. The inside of the zinc can had a thin film of mercury to prevent local action. A thinner film of mercury meant poorer shelf life. No mercury meant the zinc carbon battery was unacceptable for any application, but I suppose they are still made in some countries, less strict about mercury. The manganes dioxide is called a depolarizer as it removes the hydrogen bubbles which otherwise partially insulate the carbon rod from the rest of the battery. New zinc carbon batteries could deliver about 15 amps briefly to a very low resistant load. Modern alkaline batteries only about 5 amps. Typical applications require 1/2 amp or less. See alkaline batteries Ccpoodle 21:40, 13 November 2007 (UTC)
Revised Article - clear enough now?
I've revised the introduction and the chemistry reactions - hopefully that is now clear enough for interested readers. (I shifted to normal html for the equations as it is simpler and gives the same result.) Also included is a link to the Dry Cell page, which gives a simpler account. I added some details on the heavy duty (zinc chloride) cell, and more references. I removed all specific mention of hydrogen as (1) it isn't a significant side-reaction (2) some of the chemical equations were wrong.Ian 12:29, 16 March 2007 (UTC)
History
When were ordinary AA/AAA/C/D batteries first commonly sold? -69.87.203.130 (talk) 01:10, 18 June 2008 (UTC)
Zinc–carbon or Carbon–zinc?
This article uses both. – Mwongozi (talk) 08:13, 24 June 2008 (UTC)
[Way to not answer the question.] The question applies also to the title, which must use one or the other. The usage on Wikipedia and elsewhere may trend toward the name chosen for This Article! Before we bless the wrong name and confuse the whole world, is there a way to discover the preferred order? (Cathode first? Anode first? Metal first? Alphabetical order? Atomic-number order? First usage? Prevalent usage? Straw poll? Best argument? Loudest argument? Most persistent argument? Esthetics of sound?)
I thought it was surely a "carbon-zinc battery", but I've been brainwashed by all those Duracell® CopperTop commercials. That's why I'm looking at this talk page.
On a Google search today, "carbon-zinc battery" outnumbers "zinc-carbon battery", about 5,180,000 to about 3,940,000. That's a bit closer than I thought it would be. On Google Books, it's the opposite. "zinc-carbon battery" outnumbers "carbon-zinc battery", about 10,500 to about 9,620. It looks like the world is already confused. I'm leaving it as-is ("Zinc–carbon battery"), due to newly-acquired indifference. – A876 (talk) 22:59, 12 December 2011 (UTC)
- Today I changed the initial text in the lead from «A zinc–carbon battery» to «A zinc–carbon battery (or carbon zinc battery in U.S. English)[1][2][3][4]». --Dan Harkless (talk) 08:11, 26 February 2022 (UTC)
References
- ^ "Eveready Carbon Zinc Battery Handbook and Application Manual" (PDF). Energizer. 2018. Retrieved 2022-02-25.
- ^ "Carbon Zinc - Batteries - Electrical". The Home Depot. Retrieved 2022-02-25.
- ^ "What is the difference between Alkaline and Carbon Zinc batteries?". KodakBatteries.com. Retrieved 2022-02-25.
- ^ "Carbon Zinc Aa Batteries". Walmart. Retrieved 2022-02-25.
Move
- The following is a closed discussion of the proposal. Please do not modify it. Subsequent comments should be made in a new section on the talk page. No further edits should be made to this section.
The result of the proposal was consensus against move
Zinc-carbon battery → Zinc-carbon cell — The electrochemical battery is simply a pair of electrochemical cells. this article deals around how this type of cell works.— Preceding unsigned comment added by 81.245.90.148 (talk) 11:55, 9 October 2009 (UTC)
- Oppose. The present name of the article is clear, common, and accurate. The proposed name is not. This one one of a dozen renames proposed by the anon IP today, none of which should be carried out until some concensus is obtained. --Wtshymanski (talk) 14:48, 9 October 2009 (UTC)
- Strong Oppose and suggest speedy close (is that possible?). This is not what the general public would be looking for. HumphreyW (talk) 15:24, 9 October 2009 (UTC)
- Neutral: Technically, a battery is a combination of many Dry cells. However, the term in common usage, even for single cells, is "battery". Probably leave name as it stands. Jubilee♫clipman 15:44, 9 October 2009 (UTC)
- Technically you're wrong, since I have a battery in my car that has many wet cells, it's usually called a lead acid battery or the starter battery. :)
- True. :) The general observation I made still stands, though. Jubilee♫clipman 17:38, 9 October 2009 (UTC)
- Technically you're wrong, since I have a battery in my car that has many wet cells, it's usually called a lead acid battery or the starter battery. :)
76.66.197.30 (talk) 16:09, 9 October 2009 (UTC)
- Opppose WP:COMMONNAME 76.66.197.30 (talk) 16:10, 9 October 2009 (UTC)
- Oppose The term "battery" is almost always used by consumers, battery manufacturers, etc. TJ Spyke 17:30, 9 October 2009 (UTC)
- Note: Converted to multimove. 199.125.109.96 (talk) 00:07, 11 October 2009 (UTC)
- The above discussion is preserved as an archive of the proposal. Please do not modify it. Subsequent comments should be made in a new section on this talk page. No further edits should be made to this section.
Disposal
Someone wrote:
please edit on how to dispose of this battery!
Anyone care to amplify on this in the article? I'm not aware of any special disposal method for zinc-carbon batteries. --Wtshymanski (talk) 21:40, 14 December 2009 (UTC)
sure X-179 (talk) 00:47, 30 December 2011 (UTC)
Inventor of dry cell
There may be controversion about the inventor of the dry version of this battery. This article mentions Carl Gassner as the inventor, while the article on Wilhelm Hellesen claims that he was the first inventor. Rune Kock (talk) 00:08, 5 September 2010 (UTC)
leakage discovery
i bought one of those cheap 40 packs and kept them in a drawer. and used them as i needed. i discovered that after a certain time the used ones would leak. even if i used them for a moment, this would cause them to expand later on. the ones i had never used yet still looked new, and would expand later if i used them even for a bit. is there any explanation for this? it doesn't quite fit the explanation of the zinc corrosion in the article (The zinc container becomes thinner as the cell is used). Charlieb000 (talk) 20:18, 23 September 2011 (UTC)
- There would be side reactions and self-discharge going on even in unused cells; they all rot through eventually if you leave them long enough. --Wtshymanski (talk) 02:55, 24 September 2011 (UTC)
It seems author has little problem with purity )
It's not purity has made batteries work four times longer but right ideas. 95.72.34.15 (talk) 20:19, 9 March 2012 (UTC)Tmaker197812
Depolariser reaction.
The reaction for the depolariser in this article is at variance with that in the Leclanché cell. One is clearly incorrect. My belief is that this article is correct and that the other is wrong, but I can't find a suitable reference. 109.145.22.224 (talk) 15:59, 21 April 2012 (UTC)
Polarity is reversed.
It should say "The zinc can...is marked negative" and "the positive pole...is marked with a plus sign." 165.91.49.64 (talk) 21:33, 22 February 2016 (UTC)
External links modified
Hello fellow Wikipedians,
I have just modified one external link on Zinc–carbon battery. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20120325171702/http://www.inobat.ch/fileadmin/user_upload/pdf_09/Absatz_Statistik_2008.pdf to http://www.inobat.ch/fileadmin/user_upload/pdf_09/Absatz_Statistik_2008.pdf
When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}
).
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 21:32, 20 July 2016 (UTC)
Chicken/egg
So our text reads that the "flashlight" battery was invented before the flashlight. What, an inquiring reader would want to know, were "flashlight" batteries used for *before* flashlights? It's called a "consumer product" - but what application would it have had? A D cell is too small and short lived for auto ignition, #6 cells are better fit for connecting up for telephone circuits, because they have convenient screw terminals, and there was no "radio" to speak of in the 1890s, at least as a consumer product. What were they used for? --Wtshymanski (talk) 19:44, 10 October 2017 (UTC)
- <Somewhat later> @Wtshymanski: The text (even back in October 2017), claims that the battery was invented before the flashlight, but at no point does it claim that it was called a 'flashlight battery'. The 'dry cell' was invented in 1887 (though not really mass produced until 1896). The flashlight was patented in 1899. So what were the batteries doing between 1896 and 1899? Well the miniature lamps used by the flashlight certainly existed, as miniature carbon filament lamps were in existence by 1890. The new dry cells would have been perfect for powering such lamps. It was but a small leap of imagination to put the cell(s) and the lamps in a single tubular structure (bung in a switch for good measure) and the standard burglar model flashlight was a reality. DocFergus (talk) 17:36, 9 October 2018 (UTC)
Perplexity about the zinc half-reaction
In the "Chemical reactions" section, the following sentence can be found: "The zinc is oxidised by the charge carrier, chloride (Cl−), via the following half-reactions" etc. My perplexity is about the role of chloride ion as oxidizer; actually, it should be further reduced, which I think it is impossible. In my opinion, zinc is oxidized, so-to-say, by the reduction half-reaction that is simultaneously taking place at the cathode, and by its need of electrons, which causes electrons be released by metallic zinc and its contextual transformation into zinc ions. So, in my opinion, that sentence should be modified. Ekisbares (talk) 10:20, 6 April 2021 (UTC)
Lead content
Zinc-Carbon batteries often are labelled as containing lead, which is not mentioned in the article. 2001:871:22B:38A9:6153:5263:5055:CBB2 (talk) 21:06, 1 April 2024 (UTC)