Jump to content

Examine individual changes

This page allows you to examine the variables generated by the Edit Filter for an individual change.

Variables generated for this change

VariableValue
Edit count of the user (user_editcount)
null
Name of the user account (user_name)
'208.108.212.111'
Age of the user account (user_age)
0
Groups (including implicit) the user is in (user_groups)
[ 0 => '*' ]
Global groups that the user is in (global_user_groups)
[]
Whether or not a user is editing through the mobile interface (user_mobile)
false
Page ID (page_id)
8856166
Page namespace (page_namespace)
0
Page title without namespace (page_title)
'Fine bubble diffusers'
Full page title (page_prefixedtitle)
'Fine bubble diffusers'
Last ten users to contribute to the page (page_recent_contributors)
[ 0 => 'Oshwah', 1 => '208.108.212.111', 2 => '117.195.202.98', 3 => 'ClueBot NG', 4 => '59.191.202.234', 5 => 'AnomieBOT', 6 => 'Moreau1', 7 => 'Wavelength', 8 => 'Allens', 9 => '123.201.173.8' ]
Action (action)
'edit'
Edit summary/reason (summary)
'/* Bubble size */ '
Whether or not the edit is marked as minor (no longer in use) (minor_edit)
false
Old page wikitext, before the edit (old_wikitext)
'{{refimprove|date=April 2013}} '''Fine bubble diffusers''' are a [[pollution control]] technology used to aerate wastewater for [[sewage treatment]]. ==Description== Fine bubble diffusers produce a plethora of very small air bubbles which rise slowly from the floor of a wastewater treatment plant or sewage treatment plant aeration tank and provide substantial and efficient mass transfer of oxygen to the water. The oxygen, combined with the food source, [[sewage]], allows the bacteria to produce enzymes which help break down the waste so that it can settle in the secondary clarifiers or be filtered by membranes. A fine bubble diffuser is commonly manufactured in various forms: tube, disc, plate, and dome.<ref>U.S. Environmental Protection Agency, Washington, D.C.(2009). [http://water.epa.gov/scitech/wastetech/upload/2002_06_28_mtb_fine.pdf "Fine Bubble Aeration."] Wastewater Technology Fact Sheet. Document No. EPA-832-F-99-065.</ref> ==Bubble size== The subject of bubble size is important because the aeration system in a wastewater or sewage treatment plant consumes an average of 50 to 70 percent of the energy of the entire plant.<ref>http://www.scipub.org/fulltext/ajeas/ajeas22260-267.pdf{{deadlink|date=April 2013}}</ref> Increasing the oxygen transfer efficiency decreases the power the plant requires to provide the same quality of [[effluent]] water. Furthermore, fine bubble diffusers evenly spread out (often referred to as a 'grid arrangement') on the floor of a tank, provide the operator of the plant a great deal of operational flexibility. This can be used to create zones with high oxygen concentrations (oxic or [[Wikt:aerobic|aerobic]]), zones with minimal oxygen concentration ([[Hypoxia (environmental)|anoxic]]) and zones with no oxygen (anaerobic). This allows for more precise targeting and removal of specific contaminants. The importance of achieving ever smaller bubble sizes has been a hotly debated subject in the industry as ultra fine bubbles (micrometre size) are generally perceived to rise too slowly and provide too little "pumpage" to provide adequate mixing of sewage in an aeration tank. On the other hand, the industry standard "fine bubble" with a typical discharge diameter of 2&nbsp;mm is probably larger than it needs to be for many plants. Average bubble diameters of 0.9&nbsp;mm are possible nowadays, using special polyurethane (PUR) or special recently developed EPDM membranes.{{Citation needed|date=June 2008}} Fine bubble diffusers have largely replaced [[coarse bubble diffusers]] and mechanical aerators in most of the developed world and in much of the developing world. The exception would be in secondary treatment phases, such as activated sludge processing tanks, where 85 to 90 percent of any remaining solid materials (floating on the surface) are removed through settling or biological processes. The biological process uses air to encourage bacterial growth that would consume many of these waste materials, such as phosphorus and nitrogen that are dissolved in the wastewater. The larger air release openings of a coarse bubble diffuser helps to facilitate a higher oxygen transfer rate and bacterial growth. One disadvantage of using fine bubble diffusers in activated sludge tanks is the tendency of floc (particle) clogging the small air release holes. <gallery> Image:Image-DiscDiffuser.JPG|A Fine Bubble Diffuser in a Tank, courtesy of SSI Aeration, Inc.. Image:Fine Bubble Diffuser (Tube).jpg|Aerating water by means of fine pore membrane diffuser. Compliments of Environmental Dynamics Inc. Image:Fine bubble diffuser (Disc).jpg|Aerating water by means of fine pore 9" Disc membrane diffuser. Compliments of Environmental Dynamics Inc </gallery> ==See also== *[[List of waste-water treatment technologies]] ==References== {{Reflist}} {{Environmental technology}} {{DEFAULTSORT:Fine Bubble Diffusers}} [[Category:Sewerage]] [[Category:Water treatment]] [[Category:Environmental engineering]] [[Category:Water technology]]'
New page wikitext, after the edit (new_wikitext)
'{{refimprove|date=April 2013}} '''Fine bubble diffusers''' are a [[pollution control]] technology used to aerate wastewater for [[sewage treatment]]. ==Description== Fine bubble diffusers produce a plethora of very small air bubbles which rise slowly from the floor of a wastewater treatment plant or sewage treatment plant aeration tank and provide substantial and efficient mass transfer of oxygen to the water. The oxygen, combined with the food source, [[sewage]], allows the bacteria to produce enzymes which help break down the waste so that it can settle in the secondary clarifiers or be filtered by membranes. A fine bubble diffuser is commonly manufactured in various forms: tube, disc, plate, and dome.<ref>U.S. Environmental Protection Agency, Washington, D.C.(2009). [http://water.epa.gov/scitech/wastetech/upload/2002_06_28_mtb_fine.pdf "Fine Bubble Aeration."] Wastewater Technology Fact Sheet. Document No. EPA-832-F-99-065.</ref> ==Bubble size== ==See also== *[[List of waste-water treatment technologies]] ==References== {{Reflist}} {{Environmental technology}} {{DEFAULTSORT:Fine Bubble Diffusers}} [[Category:Sewerage]] [[Category:Water treatment]] [[Category:Environmental engineering]] [[Category:Water technology]]'
Unified diff of changes made by edit (edit_diff)
'@@ -6,16 +6,4 @@ ==Bubble size== -The subject of bubble size is important because the aeration system in a wastewater or sewage treatment plant consumes an average of 50 to 70 percent of the energy of the entire plant.<ref>http://www.scipub.org/fulltext/ajeas/ajeas22260-267.pdf{{deadlink|date=April 2013}}</ref> Increasing the oxygen transfer efficiency decreases the power the plant requires to provide the same quality of [[effluent]] water. Furthermore, fine bubble diffusers evenly spread out (often referred to as a 'grid arrangement') on the floor of a tank, provide the operator of the plant a great deal of operational flexibility. This can be used to create zones with high oxygen concentrations (oxic or [[Wikt:aerobic|aerobic]]), zones with minimal oxygen concentration ([[Hypoxia (environmental)|anoxic]]) and zones with no oxygen (anaerobic). This allows for more precise targeting and removal of specific contaminants. - -The importance of achieving ever smaller bubble sizes has been a hotly debated subject in the industry as ultra fine bubbles (micrometre size) are generally perceived to rise too slowly and provide too little "pumpage" to provide adequate mixing of sewage in an aeration tank. On the other hand, the industry standard "fine bubble" with a typical discharge diameter of 2&nbsp;mm is probably larger than it needs to be for many plants. Average bubble diameters of 0.9&nbsp;mm are possible nowadays, using special polyurethane (PUR) or special recently developed EPDM membranes.{{Citation needed|date=June 2008}} - -Fine bubble diffusers have largely replaced [[coarse bubble diffusers]] and mechanical aerators in most of the developed world and in much of the developing world. The exception would be in secondary treatment phases, such as activated sludge processing tanks, where 85 to 90 percent of any remaining solid materials (floating on the surface) are removed through settling or biological processes. The biological process uses air to encourage bacterial growth that would consume many of these waste materials, such as phosphorus and nitrogen that are dissolved in the wastewater. The larger air release openings of a coarse bubble diffuser helps to facilitate a higher oxygen transfer rate and bacterial growth. One disadvantage of using fine bubble diffusers in activated sludge tanks is the tendency of floc (particle) clogging the small air release holes. - -<gallery> - -Image:Image-DiscDiffuser.JPG|A Fine Bubble Diffuser in a Tank, courtesy of SSI Aeration, Inc.. -Image:Fine Bubble Diffuser (Tube).jpg|Aerating water by means of fine pore membrane diffuser. Compliments of Environmental Dynamics Inc. -Image:Fine bubble diffuser (Disc).jpg|Aerating water by means of fine pore 9" Disc membrane diffuser. Compliments of Environmental Dynamics Inc -</gallery> ==See also== '
New page size (new_size)
1243
Old page size (old_size)
4016
Size change in edit (edit_delta)
-2773
Lines added in edit (added_lines)
[]
Lines removed in edit (removed_lines)
[ 0 => 'The subject of bubble size is important because the aeration system in a wastewater or sewage treatment plant consumes an average of 50 to 70 percent of the energy of the entire plant.<ref>http://www.scipub.org/fulltext/ajeas/ajeas22260-267.pdf{{deadlink|date=April 2013}}</ref> Increasing the oxygen transfer efficiency decreases the power the plant requires to provide the same quality of [[effluent]] water. Furthermore, fine bubble diffusers evenly spread out (often referred to as a 'grid arrangement') on the floor of a tank, provide the operator of the plant a great deal of operational flexibility. This can be used to create zones with high oxygen concentrations (oxic or [[Wikt:aerobic|aerobic]]), zones with minimal oxygen concentration ([[Hypoxia (environmental)|anoxic]]) and zones with no oxygen (anaerobic). This allows for more precise targeting and removal of specific contaminants.', 1 => false, 2 => 'The importance of achieving ever smaller bubble sizes has been a hotly debated subject in the industry as ultra fine bubbles (micrometre size) are generally perceived to rise too slowly and provide too little "pumpage" to provide adequate mixing of sewage in an aeration tank. On the other hand, the industry standard "fine bubble" with a typical discharge diameter of 2&nbsp;mm is probably larger than it needs to be for many plants. Average bubble diameters of 0.9&nbsp;mm are possible nowadays, using special polyurethane (PUR) or special recently developed EPDM membranes.{{Citation needed|date=June 2008}}', 3 => false, 4 => 'Fine bubble diffusers have largely replaced [[coarse bubble diffusers]] and mechanical aerators in most of the developed world and in much of the developing world. The exception would be in secondary treatment phases, such as activated sludge processing tanks, where 85 to 90 percent of any remaining solid materials (floating on the surface) are removed through settling or biological processes. The biological process uses air to encourage bacterial growth that would consume many of these waste materials, such as phosphorus and nitrogen that are dissolved in the wastewater. The larger air release openings of a coarse bubble diffuser helps to facilitate a higher oxygen transfer rate and bacterial growth. One disadvantage of using fine bubble diffusers in activated sludge tanks is the tendency of floc (particle) clogging the small air release holes.', 5 => false, 6 => '<gallery>', 7 => false, 8 => 'Image:Image-DiscDiffuser.JPG|A Fine Bubble Diffuser in a Tank, courtesy of SSI Aeration, Inc..', 9 => 'Image:Fine Bubble Diffuser (Tube).jpg|Aerating water by means of fine pore membrane diffuser. Compliments of Environmental Dynamics Inc.', 10 => 'Image:Fine bubble diffuser (Disc).jpg|Aerating water by means of fine pore 9" Disc membrane diffuser. Compliments of Environmental Dynamics Inc', 11 => '</gallery>' ]
Whether or not the change was made through a Tor exit node (tor_exit_node)
0
Unix timestamp of change (timestamp)
1457356313