Talk:Delcam

This article is rated Stub-class on Wikipedia's content assessment scale.
It is of interest to the following WikiProjects:

Industrial design Low‑importance

	This article is within the scope of WikiProject Industrial design, a collaborative effort to improve the coverage of Industrial design on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.Industrial designWikipedia:WikiProject Industrial designTemplate:WikiProject Industrial designIndustrial design articles
Low	This article has been rated as Low-importance on the project's importance scale.
	This article has been automatically rated by a bot or other tool as Stub-class because it uses a stub template. Please ensure the assessment is correct before removing the `\|auto=` parameter.

The article PowerMILL was nominated for deletion. The discussion was closed on 25 December 2012 with a consensus to merge the content into Delcam. If you find that such action has not been taken promptly, please consider assisting in the merger instead of re-nominating the article for deletion. To discuss the merger, please use this talk page.

Do not remove this template after completing the merger. A bot will replace it with {{afd-merged-from}}.

This article looks more as advertisment, where there is no references to another Cad companies or similar products, or to other relevant wikipedia pages. All link to their website

Miguel — Preceding unsigned comment added by Miguelfms (talk • contribs) 10:11, 8 February 2011 (UTC)[reply]

Completely agree with the above comment. The claims seem mainly unsourced and, generally, the references need to be improved. The article seems largely cited to the company's own webpages. Particularly the very long list of products seems completely unnecessary. Sionk (talk) 18:41, 7 November 2012 (UTC)[reply]

Current events

http://www.develop3d.com/reviews/review-delcam-featurecam-2015 - Al Dean, Editor of Develop3D magazine, reviews the 2015 release of Delcam’s FeatureCAM feature-based programming software.

http://www.mmsonline.com/articles/qfs-keeps-its-customers-moving-with-integrated-cadcam - Modern Machine Shop Editor, Mark Albert, reports on the rapid turnaround offered by press die manufacturer QFS Technologies thanks to the company’s Delcam software.

http://www.moldmakingtechnology.com/articles/new-strategies-for-high-speed-roughing - Delcam’s Mark Forth discusses the company’s latest advances in high-efficiency area clearance.

http://www.tctmagazine.com/software/autodesk-delcam-acquisition-biggest-news-in-the-history-of/ - Rose Brooks from TCT discusses the importance to the CAM industry of Delcam’s acquisition by Autodesk — Preceding unsigned comment added by Tsh-delcam (talk • contribs) 14:51, 16 March 2015 (UTC)[reply]

As shown at http://www.birminghammail.co.uk/news/local-news/mosque-attacks-two-students-arrested-5145385 two engineering students working at delcam were arrested in connection with the 2013 mosque attacks in birmingham. — Preceding unsigned comment added by 90.211.90.13 (talk) 21:28, 21 July 2013 (UTC)[reply]

External links modified

Hello fellow Wikipedians,

I have just modified 5 external links on Delcam. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 10:26, 10 December 2016 (UTC)[reply]

External links modified

Hello fellow Wikipedians,

I have just modified one external link on Delcam. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

Added archive https://web.archive.org/web/20130701133927/http://www-g.eng.cam.ac.uk/125/achievements/duct/index.htm to http://www-g.eng.cam.ac.uk/125/achievements/duct/index.htm

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 20:42, 1 January 2017 (UTC)[reply]

External links modified

Hello fellow Wikipedians,

I have just modified 3 external links on Delcam. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 06:04, 8 September 2017 (UTC)[reply]

Advert

Current events

External links modified

External links modified

External links modified