Plasmid preparation
A plasmid preparation is a method of DNA extraction and purification for plasmid DNA. It is an important step in many molecular biology experiments and is essential for the successful use of plasmids in research and biotechnology.[1][2] Many methods have been developed to purify plasmid DNA from bacteria.[1][3] During the purification procedure, the plasmid DNA is often separated from contaminating proteins and genomic DNA.
These methods invariably involve three steps: growth of the bacterial culture, harvesting and lysis of the bacteria, and purification of the plasmid DNA.[4] Purification of plasmids is central to molecular cloning. A purified plasmid can be used for many standard applications, such as sequencing and transfections into cells.
Growth of the bacterial culture
[edit]Plasmids are almost always purified from liquid bacteria cultures, usually E. coli, which have been transformed and isolated.[5][6] Virtually all plasmid vectors in common use encode one or more antibiotic resistance genes as a selectable marker, for example a gene encoding ampicillin or kanamycin resistance, which allows bacteria that have been successfully transformed to multiply uninhibited.[7][8][9] Bacteria that have not taken up the plasmid vector are assumed to lack the resistance gene, and thus only colonies representing successful transformations are expected to grow.[5][9][10] Bacteria are grown under favourable conditions.
Harvesting and lysis of the bacteria
[edit]There are several methods for cell lysis, including alkaline lysis, mechanical lysis, and enzymatic lysis.[11][12][13][14]
Alkaline lysis
[edit]The most common method is alkaline lysis, which involves the use of a high concentration of a basic solution, such as sodium hydroxide, to lyse the bacterial cells.[15][16][17] When bacteria are lysed under alkaline conditions (pH 12.0–12.5) both chromosomal DNA and protein are denatured; the plasmid DNA however, remains stable.[16][17] Some scientists reduce the concentration of NaOH used to 0.1M in order to reduce the occurrence of ssDNA. After the addition of acetate-containing neutralization buffer to lower the pH to around 7, the large and less supercoiled chromosomal DNA and proteins form large complexes and precipitate; but the small bacterial DNA plasmids stay in solution.[17][14]
Mechanical lysis
[edit]Mechanical lysis involves the use of physical force, such as grinding or sonication, to break down bacterial cells and release the plasmid DNA. There are several different mechanical lysis methods that can be used, including French press, bead-beating, and ultrasonication.[11][12][13][14]
Enzymatic lysis
[edit]Enzymatic lysis, also called Lysozyme lysis, involves the use of enzymes to digest the cell wall and release the plasmid DNA.[11] The most commonly used enzyme for this purpose is lysozyme, which breaks down the peptidoglycan in the cell wall of Gram-positive bacteria. Lysozyme is usually added to the bacterial culture, followed by heating and/or shaking the culture to release the plasmid DNA.[11][12][13][14]
Preparations by size
[edit]Plasmid preparation can be divided into five main categories based on the scale of the preparation: minipreparation, midipreparation, maxipreparation, megapreparation, and gigapreparation. The choice of which method to use will depend on the amount of plasmid DNA required, as well as the specific application for which it will be used.[18][19]
Kits are available from varying manufacturers to purify plasmid DNA, which are named by size of bacterial culture and corresponding plasmid yield. In increasing order they are: miniprep, midiprep, maxiprep, megaprep, and gigaprep. The plasmid DNA yield will vary depending on the plasmid copy number, type and size, the bacterial strain, the growth conditions, and the kit.[2]
Minipreparation
[edit]Minipreparation of plasmid DNA is a rapid, small-scale isolation of plasmid DNA from bacteria.[20][21] Commonly used miniprep methods include alkaline lysis and spin-column based kits.[3][22] It is based on the alkaline lysis method. The extracted plasmid DNA resulting from performing a miniprep is itself often called a "miniprep". Minipreps are used in the process of molecular cloning to analyze bacterial clones. A typical plasmid DNA yield of a miniprep is 5 to 50 μg depending on the cell strain. Miniprep of a large number of plasmids can also be done conveniently on filter paper by lysing the cell and eluting the plasmid on to filter paper.[21]
Midipreparation
[edit]The starting E. coli culture volume is 15-25 mL of Lysogeny broth (LB) and the expected DNA yield is 100-350 μg.
Maxipreparation
[edit]The starting E. coli culture volume is 100-200 mL of LB and the expected DNA yield is 500-850 μg.
Megapreparation
[edit]The starting E. coli culture volume is 500 mL – 2.5 L of LB and the expected DNA yield is 1.5-2.5 mg.
Gigapreparation
[edit]The starting E. coli culture volume is 2.5-5 L of LB and the expected DNA yield is 7.5–10 mg.
Purification of plasmid DNA
[edit]It is important to consider the downstream applications of the plasmid DNA when choosing a purification method. For example, if the plasmid is to be used for transfection or electroporation, a purification method that results in high purity and low endotoxin levels is desirable. Similarly, if the plasmid is to be used for sequencing or PCR, a purification method that results in high yield and minimal contaminants is desirable.[2] However, multiple methods of nucleic acid purification exist.[23][24][25] All work on the principle of generating conditions where either only the nucleic acid precipitates, or only other biomolecules precipitate, allowing the nucleic acid to be separated.[15][23]
In high-throughput DNA extraction workflows, laboratory equipment such as 96 well plate template can be utilized to efficiently process multiple samples in parallel. These templates allow for the automation of extraction protocols, significantly increasing the throughput of plasmid DNA isolation while maintaining consistency across large sample sets. When used in combination with automated liquid handling systems, a 96 well plate template helps streamline the process of extracting plasmid DNA from bacterial cultures, ensuring uniformity and reducing manual errors during the purification steps.
Ethanol precipitation
[edit]Ethanol precipitation is a widely used method for purifying and concentrating nucleic acids, including plasmid DNA.[26] The basic principle of this method is that nucleic acids are insoluble in ethanol or isopropanol but soluble in water. Therefore, it works by using ethanol as an antisolvent of DNA, causing it to precipitate out of solution and then it can be collected by centrifugation. The soluble fraction is discarded to remove other biomolecules.[27]
Spin column
[edit]Spin column-based nucleic acid purification is a method of purifying DNA, RNA or plasmid from a sample using a spin column filter.[25] The method is based on the principle of selectively binding nucleic acids to a solid matrix in the spin column, while other contaminants, such as proteins and salts, are washed away. The conditions are then changed to elute the purified nucleic acid off the column using a suitable elution buffer.[25]
Phenol–chloroform extraction
[edit]The basic principle of the phenol-chloroform extraction is that DNA and RNA are relatively insoluble in phenol and chloroform, while other cellular components are relatively soluble in these solvents. The addition of a phenol/chloroform mixture will dissolve protein and lipid contaminants, leaving the nucleic acids in the aqueous phase. It also denatures proteins, like DNase, which is especially important if the plasmids are to be used for enzyme digestion. Otherwise, smearing may occur in enzyme restricted form of plasmid DNA.[24]
Beads-based extraction
[edit]In beads-based extraction, addition of a mixture containing magnetic beads commonly made of iron ions binds to plasmid DNA, separating them from unwanted compounds by a magnetic rod or stand.[25] The plasmid-bound beads are then released by removal of the magnetic field and extracted in an elution solution for down-stream experiments such as transformation or restriction digestion. This form of miniprep can also be automated, which increases the conveniency while reducing mechanical error.
References
[edit]- ^ a b Li JF, Li L, Sheen J (January 2010). "Protocol: a rapid and economical procedure for purification of plasmid or plant DNA with diverse applications in plant biology". Plant Methods. 6 (1): 1. doi:10.1186/1746-4811-6-1. PMC 2829548. PMID 20180960.
- ^ a b c Prazeres DM, Monteiro GA (December 2014). Tolmasky ME, Alonso JC (eds.). "Plasmid Biopharmaceuticals". Microbiology Spectrum. 2 (6): 2.6.02. doi:10.1128/microbiolspec.PLAS-0022-2014. PMID 26104457.
- ^ a b Lezin G, Kosaka Y, Yost HJ, Kuehn MR, Brunelli L (2011). "A one-step miniprep for the isolation of plasmid DNA and lambda phage particles". PLOS ONE. 6 (8): e23457. Bibcode:2011PLoSO...623457L. doi:10.1371/journal.pone.0023457. PMC 3156146. PMID 21858126.
- ^ Bouchard R, et al. (2010). Laboratory Methods in Microbiology. Universal Scientific. pp. 119–126.
- ^ a b Suza W, Lee D (15 October 2021). "11. Recombinant DNA Technology; Ligase enzyme and gene cloning". Genetics, Agriculture, and Biotechnology. Iowa State University.
- ^ Ismail R, Allaudin ZN, Lila MA (September 2012). "Scaling-up recombinant plasmid DNA for clinical trial: current concern, solution and status". Vaccine. 30 (41): 5914–5920. doi:10.1016/j.vaccine.2012.02.061. PMID 22406276.
- ^ "Plasmid". Genome.gov. Retrieved 2022-12-10.
- ^ Batree L, Shriner W, Creech C (2017). "Biotechnology". Principles of biology. Open Oregon Educational Resources.
- ^ a b Bennett PM (March 2008). "Plasmid encoded antibiotic resistance: acquisition and transfer of antibiotic resistance genes in bacteria". British Journal of Pharmacology. 153 (Suppl 1): S347–S357. doi:10.1038/sj.bjp.0707607. PMC 2268074. PMID 18193080.
- ^ Smalla K, Jechalke S, Top EM (February 2015). "Plasmid Detection, Characterization, and Ecology". Microbiology Spectrum. 3 (1): PLAS–0038–2014. doi:10.1128/microbiolspec.PLAS-0038-2014. PMC 4480600. PMID 26104560.
- ^ a b c d Rahman MM, Hosano N, Hosano H (April 2022). "Recovering Microalgal Bioresources: A Review of Cell Disruption Methods and Extraction Technologies". Molecules. 27 (9): 2786. doi:10.3390/molecules27092786. PMC 9104913. PMID 35566139.
- ^ a b c Weber S, Grande PM, Blank LM, Klose H (2022). "Insights into cell wall disintegration of Chlorella vulgaris". PLOS ONE. 17 (1): e0262500. Bibcode:2022PLoSO..1762500W. doi:10.1371/journal.pone.0262500. PMC 8759652. PMID 35030225.
- ^ a b c Wang D, Li Y, Hu X, Su W, Zhong M (April 2015). "Combined enzymatic and mechanical cell disruption and lipid extraction of green alga Neochloris oleoabundans". International Journal of Molecular Sciences. 16 (4): 7707–7722. doi:10.3390/ijms16047707. PMC 4425044. PMID 25853267.
- ^ a b c d Borchers A, Pieler T (November 2010). "Programming pluripotent precursor cells derived from Xenopus embryos to generate specific tissues and organs". Genes. 1 (3): 413–426. doi:10.3390/mi8030083. PMC 6190294. PMID 24710095.
- ^ a b Williams JA (June 2013). "Vector Design for Improved DNA Vaccine Efficacy, Safety and Production". Vaccines. 1 (3): 225–249. doi:10.3390/vaccines1030225. PMC 4494225. PMID 26344110.
- ^ a b Zazilek G (2010-04-12). "Alkaline Lysis". askabiologist.asu.edu. Retrieved 2023-01-02.
- ^ a b c Birnboim HC, Doly J (November 1979). "A rapid alkaline extraction procedure for screening recombinant plasmid DNA". Nucleic Acids Research. 7 (6): 1513–1523. doi:10.1093/nar/7.6.1513. PMC 342324. PMID 388356.
- ^ Serghini MA, Ritzenthaler C, Pinck L (May 1989). "A rapid and efficient 'miniprep' for isolation of plasmid DNA". Nucleic Acids Research. 17 (9): 3604. doi:10.1093/nar/17.9.3604. PMC 317816. PMID 2726501.
- ^ Kovalenko SA, Tanaka M, Ozawa T (December 1994). "Simple methods for preparation of plasmid DNA yielding long and accurate sequence data". Nucleic Acids Research. 22 (25): 5771–5772. doi:10.1093/nar/22.25.5771. PMC 310149. PMID 7838738.
- ^ Chowdhury K (May 1991). "One step 'miniprep' method for the isolation of plasmid DNA". Nucleic Acids Research. 19 (10): 2792. doi:10.1093/nar/19.10.2792. PMC 328215. PMID 2041760.
- ^ a b "Plasmid Mini-Prep | College of Biological Sciences". cbs.umn.edu. Retrieved 2023-01-10.
- ^ Zhang S, Cahalan MD (2007-07-29). "Purifying plasmid DNA from bacterial colonies using the QIAGEN Miniprep Kit". Journal of Visualized Experiments (6): 247. doi:10.3791/247. PMC 2557117. PMID 18997895.
- ^ a b Tan SC, Yiap BC (2009). "DNA, RNA, and protein extraction: the past and the present". Journal of Biomedicine & Biotechnology. 2009: 574398. doi:10.1155/2009/574398. PMC 2789530. PMID 20011662.
- ^ a b "Phenol-Chloroform Extraction | Herman Lab | Nebraska". hermanlab.unl.edu. Retrieved 2023-01-10.
- ^ a b c d Ali N, Rampazzo RC, Costa AD, Krieger MA (2017). "Current Nucleic Acid Extraction Methods and Their Implications to Point-of-Care Diagnostics". BioMed Research International. 2017: 9306564. doi:10.1155/2017/9306564. PMC 5529626. PMID 28785592.
- ^ Zeugin JA, Hartley JL (1985). "Ethanol Precipitation of DNA" (PDF). Focus. 7 (4): 1–2. Retrieved 2008-09-10.
- ^ "Barrick Lab :: ProtocolsEthanolPrecipitation". barricklab.org. Retrieved 2023-01-10.
Further reading
[edit]- Birnboim HC, Doly J (November 1979). "A rapid alkaline extraction procedure for screening recombinant plasmid DNA". Nucleic Acids Research. 7 (6): 1513–1523. doi:10.1093/nar/7.6.1513. PMC 342324. PMID 388356.