Talk:Blacksmith

untitled

I have edited the information on "Blacksmith" because the blacksmith is not obsolete. Thousands of us are employed throughout the world providing everything from sculpture to medical equipment.

Good for you. Please add more info, e.g. why it's called "black", its history, has technology advanced? -- Heron

Room for more

These are some thoughts I've had as I read this and related entries here. Yes, I'm thinking about editing this a bit myself. I have the facts, but I want to get references together.

There is room for more in this entry. Some thoughts on that subject:

1) The article on "forge" is pretty good and covers much the same ground. That should be linked at least. Should give some thought to where the information is better put and how much detail. BeckenhamBear (talk) 16:34, 25 November 2009 (UTC)

2) The entry would be improved with more historical information and more bibliographical information.

3)There should be some connection to basic tools and techniques. Again this could be addressed by connecting to "forge".

I'm of the opinion that blacksmith/blacksmithing should be a separate section as it refers to the trade and tradesperson involved. "forge" seems to refer more to the particular tool/equipment and the processes involved.

Please go ahead and make your contributions if this is a subject you are familiar with. ike9898 22:20, Mar 3, 2005 (UTC)

New Wikibook on Smithing

I'm in the process of moving some journal entries from the last several Summers of reenactments and smithing into a Wikibook. From that I want to link to several entries here. Both this one and some in Metalwork. For those who might be interested the link to that book is:

http://en.wikibooks.org/wiki/Down%27n%27dirty_Blacksmithing

It is, admittedly, rougher than I care for, but it's a start.

I'm hoping that as I pass the links to other smiths I know that this will get more input.

My hope for the Wikibook is that it is a point of entry into these other articles and vice versa. It's intent is to be as hands-on as I can make an e-book.

Some of that hinges on the weather getting warm so I can make some pictures of what is going on in the book. Until the ground thaws I'll work on the words and pages.

--Erraunt 17:17, 5 Mar 2005 (UTC)

errors

I'm going to go ahead and 'be bold' and fix some information on this page I believe to be inaccurate. But I don't happen to have an authoritative source at hand, so I won't object if someone elects to roll back my changes, provided there is justification.

1)Traditional japanese samurai swords were for use primarily against unarmored opponents; were used in slashing and draw-cut techniques that do not jar the steel overmuch: were forged using (often) very poor japanese steels which led to the folding techniques; were not usually tempered in the same manner as western weapons.

2)Blaksmiths use all sorts of blowtorches, not just oxyacetylene (my teacher uses oxy-propane, for example). I'm making this ref less specific.

3)While its true that low-carbon wrought iron is easier to forge weld than mild steel or carbon steel, all are readily forge-weldable (I have done it myself, as a beginner).

Overall I'd like to see expansion of this article with more in-depth information about various techniques. --Leperflesh 20:32, 1 March 2006 (UTC)

Good edits, thank you! KarlBunker 21:39, 1 March 2006 (UTC)

someone had added the incorrect information that you can hold steel you have heated in your bare hand. I have removed it, and added the note that tongs (even a pair of pliers) should always be used to hold hot steel. I also removed the dangerous and foolish idea that steel could be upset by droping it on the floor. this is, in pratice, very dangerous and unreliable.67.140.63.41 (talk) 11:05, 22 October 2008 (UTC)

additions

I like how this has been fleshed out. I've added a few sections on techniques and tools. I didn't have my dictionary handy so my apologies in advance for typos, formatting and any other faux pas.

I tried to avoid duplicating some of the tool entries. I'm sure there are a number of links to more information that should be in there but I figured the additions made sense in this article and better to get them in while I had the time than to take the time to make them pretty. Apologies for any offense. I'll make an effort in the next couple of weeks to check some of my teaching materials to find better definitions and descriptions of the basic operations and such.

Part of me wants this to have a ton more pictures ... and then I start wondering if that's too much for one article. I'm open to pushing some of what I added out into sub articles if that would be more appropriate.

Erraunt 03:55, 29 March 2006 (UTC)

Erraunt -- I think these are excellent additions. One thing I questioned was whether there should be so much description of the types of welding other than forge welding, since these aren't traditional blacksmithing techniques. I think maybe a brief mention of the fact that modern blacksmiths sometimes use modern welding techniques, with a link to Welding, would be better. I think more pictures would be great. A lot of things would be much clearer with a good picture, like a selection of hammers, maybe an illustration of upsetting, all kinds of things. KarlBunker 12:29, 29 March 2006 (UTC)

KarlBunker -- agree completely. Got busy writing and kind of just kept going and so we have the MIG and TIG. My main goal was to get what in the local guild we call the "basic operations" into the article. I think they're important and I'm trying to find a middle ground between a meaningless listing and a how-to. There is tons more that could be done both with this article and the rest of the metalworking project. Unfortunately I don't have the time I'd like. But I was looking at it last night and going "not quite enough". Erraunt 15:04, 29 March 2006 (UTC)

I did some more editing this morning and need to do more.

For the record I debated on expanding the basic processes as there is a "Forge" article which does discuss forging. However that article describes what I would call "commercial forging" as in a manufacturing process. I think, at least for now, in "Blacksmith" it's appropriate to talk about the processes of forging as accomplished with the basic hand tools traditionally associated with the blacksmith. OK, maybe I'm taking advantage of the organic nature of Wiki and putting it here until time and opinion develop and it becomes more evident where these should best be. I place some value on getting the information in and findable over trying to find the *perfect* location for the information.

Right now in the back of my mind is a debate on if the basic operations should be offloaded, eventually, to individual articles with much more detail. I don't know how necessary or appropriate that would be and my current thinking is to just get this clean and tight and down the way when more illustrations are available a separate article might be worthwhile.

Tools needs work next I think. There are articles on the particular tools in other sections. Illustrations again are an issue. Had I time and Photoshop running or my scanner up I'd just sketch or photograph and upload.

Is it time to put more of a focus to this article? Would it be appropriate to say in the beginning that this article will focus on "traditional" blacksmithing and leave more modern and production methods to other articles?

This brings to mind that the history of the craft section could, appropriately, be expanded. Thoughts? Opinions? Brickbats? Erraunt 18:00, 29 March 2006 (UTC)

Re. It should be noted that none of the four basic forging operations remove stock. Punching can remove stock. (I remember some book talking about the great amusement old-time blacksmiths would find in watching a barefoot apprentice who has stepped on the hot billet of metal knocked out by a punch. :-)

I don't think any more detail is needed on the basic operations, and I suspect that offloading them to individual articles would bring objections that such articles are "Such a minor branch of a subject that it doesn't deserve an article" (part of the Wikipedia:Deletion policy.)

I don't think it's necessary to say that the article focuses on "traditional" blacksmithing. I think people perceive blacksmithing as being inherently a "traditional" craft.

Oh, and "pien" is an accepted alternate spelling, though personally I like "peen" much better. :-) KarlBunker 18:22, 29 March 2006 (UTC)

Re. It should be noted that none of the four basic forging operations remove stock. Punching can remove stock. (I remember some book talking about the great amusement old-time blacksmiths would find in watching a barefoot apprentice who has stepped on the hot billet of metal knocked out by a punch. :: Re. the forgoing ... you know I thought about putting "at most a negligible amount of stock" in there. :) Yes, when punching there is, typically, a small disk that pops loose at the very end, occasionally a slug if you use another method. Most of the stock when punching is pushed away widening and lengthening the stock at that point. Strictly speaking, yes, there is *some* stock removed in punching operations. Usually most of the stock is pushed out of the way. Different from drilling where the stock is cut out of the hole removing material.

I know you aren't arguing the point, but thought I'd let you know.

And I'm trying to figure out how to say this without sounding like I'm bragging or putting someone in their place, but while I'm not what I would consider a professional blacksmith, I do smith and have for over 6 years steadily, I teach occasionally at the local Guild of Metalsmiths and elsewhere, and I demonstrate regularly. And I've made stuff and sold it which, I guess, technically, makes me a professional.

So I know what happens when you put a punch through a piece of steel (and I don't wear opentopped boots!)

That said: challenge me on anything I write. I'm fallible, and while maybe "more expert", I will not claim to be "an expert". I don't know the backgrounds of other contributors, but figured since I know I've had hands on experience with this stuff and have read a few of the "classics" on the subject that I would try to bring my direct experience into these articles as much as I can. (Which is some of why the forge welding section shifted to descriptive rather than technically detailed.)

On "peen", I like the other spelling too, but having used both "pien" and "pein" and not remembering which way it is or if the "i" before "e" rule applied I opted for "peen" because it's simpler.

Remember, us blacksmith types are about efficiency. ;)

I'll leave the operations as they are. Not to toot my own horn, but I feel they do something for the article. You know it's a fairly focused thing. I bet we could put just a little more flesh on the bones and a bit of polish and it could be one of those "more complete" kinds of articles. Erraunt 02:06, 30 March 2006 (UTC)

KarlBunker

Appreciate the editing you did the last few days. I may have some technical issues with some of what you removed. I'm going to give it a day or so and then work by posting proposed changes here for comment before an inclusion. Erraunt 19:13, 3 April 2006 (UTC)

I made the following change today back toward the orignial writing:

For example to fashion a cross peen hammer head a smith would start with a bar roughly the diameter of the hammer face, the handle hole would be punched and drifted, the head would be cut (punched, but with a wedge), the peen would be drawn to a wedge, and the face would be dressed by upsetting.

I don't know how to put it better. At the end of making a hammer head, the face is "dressed" roughly smoothed and usually given a slight dome or convex surface. It does not get wider. To get it noticably wider would take so much upsetting as to distort the peen and the eye and it would be a *lot* of work. "Upsetting" is the process that is happening at this point. It isn't as overt as the upsetting you do on a rod end for fashion a rivet head, but it's still upsetting.

The purpose of this was an attempt to get across that these processes don't necessarily happen in isolation. A smith doesn't go "first we draw, like *this*, then take another heat and upset like *this*". It happens on the fly. If I'm working out a chisel blade I'm hammering along to draw it out over the horn and I see it getting a little spread at one point so in a heartbeat I have it on the face and up on edge, give it a few raps to bring it into line, a quick check and back to the horn for more drawing before I loose the heat.

Maybe I'm tilting windmills, but it's this kind of thing that would illustrate a blacksmith's work and how it differs from other kinds of metalwork that are more "manufacturing" and "factory" work. Hope this makes sense. 128.101.114.146 21:07, 3 April 2006 (UTC)

I think that change back toward the previous writing makes perfect sense. Thanks. KarlBunker 23:24, 3 April 2006 (UTC)

I noticed that there was no article written on specifically bladesmithing, so I wrote the bare bones of one and mentioned it at the top of this article. Hope nobody minds. And please update or edit the bladesmithing article as you see fit, it's far from complete or comprehensive, I just wanted to have something there. Kazrian 12:46 5 June 2006 (EST)

History

Can someone confirm whether the following is true? I'd heard that in ancient times, blacksmiths were often hobbled (intentially crippled) by their villages to ensure they did not leave. The reason for this was that they were so valuable to a community that their departure meant economic/technological doom for a community.

I had also heard that this is the reason why Hephaestos (sp?) is shown as crippled in the greek myths. Any references on this? If this is true I think it would be an excellent addition to this article since it deomonstrates how incredibly important blacksmiths were to communities. Thanks Hu Gadarn 18:46, 2 August 2006 (UTC)

response: I also have heard of the crippling of blacksmiths, but I know of no reliable reference for such behaviour. I would leave the story as 'apocryphal'.

yes i havent heared much about crippiling their blacksmiths but if you look up hephaestus on this site it tells you a couple stories such as being throone by the gods but the scientific reason was in the smithing itself and being bent over for so long and the arsenic and other chemicals that we would now consider deadly but were common practice back then may have crippled him well thats my 2 1/2 cents --Stonewall92 (talk) 01:22, 30 November 2007 (UTC)

Vandalism?

So anyway, i went ahead and corrected stuff like haz and blaksmifa'z in da houze and such, but im not even sure the bit of article is even relevant.. http://en.wikipedia.org/enwiki/w/index.php?title=Blacksmith&action=edit&section=14 Perhaps some woking by someone who KNOWs would be good? 82.38.28.177 14:13, 14 November 2006 (UTC)

I've reverted one round of vandalism. I see as of this date that a section on one of the key processes has been removed. I'd simply revert but I do see a few additions by "names" and I'd hate to pitch out something good.

I'll try to make time over the next weeks to do some serious editing, although with the vandals amok I want to ask if there are steps we can take to protect this work. At least block changes from the more obvious IP addresses that seem to be the biggest culprits? Erraunt (talk) 02:11, 15 January 2008 (UTC)

Heat Treating

I believe that being technically detailed in the explanation of a complex process can only be a benefit to Wikipedia in general as well as helping those who come here for information perhaps come away with something more than could be found in another place. What do you all think? Patris Magnus 01:02, 6 December 2006 (UTC)

A lot of discussion of heat treatment isn't appropriate to, or necessary for, this article. There's an article on heat treatment which could be expanded. If you're eager to write about it, why not put it in the correct article? KarlBunker 03:22, 6 December 2006 (UTC)

I disagree: heat treatment should be included in this article. Heat treatment of steels and iron is a necessary and intrinsic part of the craft of blacksmithing. Furthermore, the article heat treatment is more geared to industrial and metallurgical methods which are not blacksmith related, require equipment and technology beyond that found in smithies, and apply to more metals (such as aluminum alloys) than are the subject of blacksmithing. —Preceding unsigned comment added by 68.37.58.28 (talk) 07:38, 1 January 2008 (UTC)

Quality of pictures could be better

Can some improved pictures be used on this page? Here's my key concerns: (i) they all appear to be from one source (yet I believe there is more than one blacksmith); (ii) the # of photos is too many for what they claim to convey (two pictures are almost identical ("a blacksmith at work" and "hot metal"); and, (iii) some of the pictures are unclear ("a blacksmith's fire"). Thanks, Hu Gadarn 18:21, 6 February 2007 (UTC)

I am working on additional photos for the Blacksmith and related tools pages. I think the above points are right on the money.Fciron 19:55, 15 February 2007 (UTC)

• • See commons:Category:Blacksmiths and commons:Blacksmith for some additional images that might be relevant to this article. As well, if you take any new photos relating to blacksmithing, please upload then to commons:Category:Blacksmiths rather than to the English Wikipedia so that the photos can be used in the Wikipedias in other languages. --Eastmain 23:30, 22 February 2007 (UTC)

That was my plan. I am new to wikipedia, so I go off on long howto tangents. Thanks for the categories.Fciron 05:15, 27 February 2007 (UTC)

This is a picture of my grandfather who was a blacksmith all his working life. Doc James (talk) 23:16, 15 July 2008 (UTC)

I have made a work table to be used for blacksmithing, the back drop of the table is a 6 foot tall blacksmith that was cut out of 1/2" steel plate. The blacksmith is hammering a lightning bolt on an anvil. If you would like to add the picture as a reference of a modern tribute to the Blacksmith please feel free to use the photo. It can be seen at http://www.weldingpros.faithweb.com/images/chads_photos2009a_035.jpg —Preceding unsigned comment added by Bella237 (talk • contribs) 19:03, 4 September 2009 (UTC)

Post-apocalyptic Blacksmith link?

While the page does have substantial info on blacksmithing, the context is... well... unusual, let's say. I'm not sure this is an appropriate link? --Leperflesh 21:54, 21 February 2007 (UTC)

I concur. This (P.A. Blacksmith) page should not be linked from here. Hu Gadarn 23:21, 22 February 2007 (UTC)

• Although the context is odd, it explains why some people are interested in blacksmithing. I don't have any problems with the blacksmithing part of the article, even though the theology is suspect. --Eastmain 23:30, 22 February 2007 (UTC)

Facing?

I was recently at a crafts fair-type thing (if you know what I mean) and I was watching a blacksmith there who said using a chisel to make imprints and delicate designs on the iron/steel was called facing. Now I'm sorry if this was mentioned before, if I didn't see it in the article, or the blacksmith was just kind of bored and made stuff up, but should this be added? BlueX511 20:16, 3 July 2007 (UTC)

I (someone else) would recommend against the use of the term "facing." While there are many regional term variants, I've never heard or read of this one. It would be perhaps better to refer readers to the following terms (where they will be able to find a lot of information):

* engraving - using small chisels (gravers) to carve line art into metal.
* chasing - using small blunt rods to drive particularly shaped grooves into sheetmetal.
* repoussé (embossing) - using chasing tools and a pitch bowl to shape sheetmetal into bas-relief artwork from the backside of the metal.

Really lacking on historic content

I was coming to this article hoping to find information on when blacksmiths started to decline in numbers significantly to get an idea when the last blacksmiths would have existed in a town, but there is practically no information in that regard. I'd highly encourage someone who knows more history in this subject to contribute to it. Thanks. -- Suso 02:17, 20 August 2007 (UTC)

What Happened?

I visited this page after some time. While I don't own it I do feel some ownership toward it as I was one of the early contributors. So much vandalism and unreferenced citations! I don't know when I can get back to this to give it the thorough edit it needs, but please, while we should "be bold" cite your source at least if you're going to change what has been written. Some of the early contributors are practicing smiths and do know what they're about.

Erraunt (talk) 22:40, 23 October 2008 (UTC)

definition of terms

The definition of terms does not belong in the history/mythology section. I suggest either a new section for it, or moving it into The Blacksmith's Materials section (since all the terms defined, are of materials); or, just removing it, since the entire purpose of wikilinking words is to provide external definitions of them. --Leperflesh (talk) 22:05, 22 January 2009 (UTC)

untitled

Does noting that Blacksmiths produce "sex utensils" add much to the article? It may be true, but I don't think making sex toys constitute such a major element of the blacksmiths art that it needs mentioning so soon. —Preceding unsigned comment added by 87.112.28.194 (talk) 21:58, 1 February 2009 (UTC)

Salary

Is the salary really over 9000? 11:22, 23 February 2009 (UTC)

Medieval Blacksmith's part on the Fuedal Pyramid

The Blacksmith's of Medieval times, were merchants, because they made goods, to sell. —Preceding unsigned comment added by 67.184.211.242 (talk) 20:52, 12 April 2009 (UTC)

Mangled-up formatting and organization

This article needs reorganization and the layout needs to be fixed. Why is a Blacksmith's Striker the first thing talked about for example? Some basic high school English-class stuff needs to be done for this article.

Also, somehow there are three "blue edits" right next to each other and it can't easily be seen what each refers to, maybe this has something to do with all those pictures crammed together up on the top right. I'm sure I could fix it, but it would take hours and it's not my subject anyway so I'm "not gonna do it".  :-) Some one please fix it.

Also please remove the stuff that, while interesting, doesn't have much to do with the subject.

Yours anonymously today,

71.174.196.21 (talk) 04:33, 9 May 2009 (UTC)

Blacksmithering

Blacksmithering is not a real word. Where did it come from? Can’t you use the correct one smithing or even the fairly dubious but more elegant blacksmithing?

Additionally in manufacturing the term "black" is used describe metal whose finish has been left untreated or unaltered since the forging process; compare it with Bright finish. Nice enough article otherwise. BeckenhamBear (talk) 16:34, 25 November 2009 (UTC)

Two additions

I'm new to this side of Wikipedia, and I wasn't certain if I should have posted this as an edit to the "additions" thing or what.

First Addition: Griswold, the blacksmith of Tristrum in Diablo I. Diablo's a classic game that most gamers have played and will agree that Griswold is a notable character. Sure, he has no real significance in the first game beyond being a blacksmith, but he's one a lot of people know.

Second Addition: The smock/apron that the blacksmiths wear. Is it made of anything beyond basic cloth? I don't know what would be added there, but some small detail should be added by someone who does know. —Preceding unsigned comment added by 24.18.250.203 (talk) 14:18, 12 June 2010 (UTC)

I don't think the addition of griswold is notable, seeing how he doesn't have an article. The apron is a good addition, and its usually made from leather, I believe. Wizard191 (talk) 18:11, 12 June 2010 (UTC)

ERD

I removed the section because this article is dying from scope creep. This article should be discussing the main points of being a blacksmith, their history, etc.; not the intricacies of each process and material. That's what links are for. It's one thing to say they work steel, copper alloys, etc., but it's another to explain what makes steel different from white cast iron. As such, the whole section should go, along with a lot of the processes. Wizard191 (talk) 13:02, 5 September 2010 (UTC)

I'd support the materials section (mostly to distinguish wrought iron from steel), but that section was too long. Andy Dingley (talk) 13:17, 5 September 2010 (UTC)

I support a general tuneup of the article, but as a person coming in here from the horse and farrier articles, who knows nothing about metal forging, a summary of the concepts and terms is appropriate, and certainly the addition of some "Main" and "see also" links would be good. I have restored the blanked section until we sort out how much needs to stay and what can go. I also tried to re-kill some of the overwikilinking that I agree was a problem. Montanabw^(talk) 17:32, 5 September 2010 (UTC)

I agree that more main links need to be included, however, I don't see anything that's redeemable in the "The blacksmith's materials" section. Wizard191 (talk) 18:59, 5 September 2010 (UTC)

Au contraire! To someone with no knowledge of metallurgy, a brief summary, such as that one, explaining the different types of metal a blacksmith uses is quite appropriate. If you think it is overly detailed, it could be chopped, but my whole issue here is that the section provides a useful summary to those of us who need to know, but don't necessarily need to research the entire topic via wikilinks. My take: rewrite, don't kill. Montanabw^(talk) 02:48, 7 September 2010 (UTC)

Shrinking needs rewrite

The section on Shrinking reads: "Shrinking, while similar to upsetting ... " This is a poor construction at best, as Upsetting is not defined until further down the article. I'm not well versed in subject matter; I'll leave the editing to someone more knowledgeable. Thanks, Karl gregory jones (talk) 22:33, 13 September 2010 (UTC)

I've just removed the whole section. I've never come across the term shrinking in this context, and couldn't find it in any of my reference books. If someone can provide a reliable reference for its inclusion then they can bring it back, but the section was confusingly written and not super notable. Kierkkadon (talk) 15:32, 15 January 2013 (UTC)

Shrinking is a rare technique, because it's hard to do it well. It's in standard textbooks though. Mostly a smith would avoid the need for it as much as possible, by not getting a piece to a point where it needs to be shrunk. One place where shrinking is widely used (and disliked, as it's hard to do well) is for torch-working car bodywork, particularly for dent repair. Andy Dingley (talk) 15:39, 15 January 2013 (UTC)

Ah, that's why I've not come across it. The only time I've heard the term is as a way to attach two pieces; one piece is heated up and the cold piece slid into it, then as the first cools and shrinks it closes and friction prevents the two pieces from separating. At any rate, the section for shrinking (if returned to the article) would need to go after upsetting, and be a tad more clearly explained. Kierkkadon (talk) 16:07, 15 January 2013 (UTC)

I think you may have latched onto a meaning of "shrinking" different from the one intended here. There is a technique called shrinking that is essentially a form of upsetting, but with the force applied by allowing the work to buckle between 2 end restraints and then striking the buckled part to force the buckle back into place. There is a more detailed explanation in http://en.wikibooks.org/wiki/Down%27n%27dirty_Blacksmithing .--Wcoole (talk) 20:49, 7 April 2014 (UTC)

Edit request on 24 February 2013

The link to sledgehammer goes to sledge_hammer, and not sledgehammer. This is not correct 90.192.221.234 (talk) 14:51, 24 February 2013 (UTC)

 Done Camyoung54 talk 17:16, 24 February 2013 (UTC)

Edit request on 22 March 2013

You really do need to include quenching. For start the raw material of METAL will not be strong enough to create a sword that could withstand a heavy blow from another sword in battle in order to protect your body from attacking swords blow. QUENCHING... Heat the metal till it is RED hot, then hammer, re HEAT metal till YELLOW, and enter METAL into bucket or troff full of water. If you need any more tips on WhiteSMITHS or BLACKSmiths then do let me know.

91.125.154.12 (talk) 23:49, 22 March 2013 (UTC)

Not done: please provide reliable sources that support the change you want to be made. RudolfRed (talk) 23:58, 22 March 2013 (UTC)

I added links to Heat treatment and case-hardening to the Finishing section, which seems like full coverage for an encyclopedic article. The wikibook has more detail. --Wcoole (talk) 20:41, 7 April 2014 (UTC)

Weapons

This is wrong, in a sense. While a weapon-smith is, at the heart, a blacksmith, in that they work in iron and steel(and bronze, earlier), the blacksmith is not a weapon-smith. The general village blacksmith didn't make weapons, that was the work of a dedicated professional. A general machine-shop today would probably be able to make a firearm of some sort, that doesn't make them a weapons company. A weapon-smith, and particularly a bladesmith did nothing but create weapons, and had long training and dedicated tools for the job. You didn't just whack something together out of what you had lying around. 85.229.59.77 (talk) 14:40, 12 June 2015 (UTC)

I am not sure what you are referring to. There is nothing in the article I can find that implies all blacksmiths are weapon-smiths. If there is a particular piece of text you think should be changed, I would recommend changing it and providing a reliable citation. Worst case scenario it gets reverted. 217IP (talk) 20:11, 9 July 2015 (UTC)

Any smith could, and, did, make weapons when needed or wanted, if he was the only craftsman around. He had all knowledge of the "black metal"; iron (and, steel). Ref: Did some 'smithing.184.99.150.138 (talk) 16:38, 16 January 2017 (UTC)

Should be links to whitesmithing, brownsmithing, and so forth...

for uksake sort it out! — Preceding unsigned comment added by 2A02:C7D:411:1600:226:8FF:FEDC:FD74 (talk) 09:50, 23 July 2016 (UTC)

Picture? "Furnace".

The 2nd photo describes: "..furnace.." in the caption. It is called a Forge. Attempted to edit caption but could not. Ref: Did some smithing, it's in my family. Taking class at Pima College.184.99.150.138 (talk) 16:41, 16 January 2017 (UTC)

Discussion of list section

Moved from my talkpage: Hi User:Montanabw. I refer to your revert of my edit on Blacksmith. No biggy, but I just thought I should ask you why you think they were trivia? Each was there because of the main reason they met GNG in their own articles. Surely that by definition is not trivial? I did note your suggested alterantive for a list article, but one of the same name had been A7ed 8 years ago, and I did not think that it was that critical for a fight anywhere, my strong preference is still for a short Notables section in Blacksmith, but/so I have deorphaned the article that prompted my edit in the first place another way. Eno Lirpa (talk) 12:47, 29 May 2017 (UTC)

My answer: this is a short random list of trivia, which is generally discouraged (see WP:TRIVIA). In theory, a list of "notable blacksmiths" past and present could number in the hundreds, maybe the thousands, but certainly the dozens, all of which would bloat the article. Absent a criteria of what makes a blacksmith more notable than other blacksmiths, the list is also not helpful to advance information about the topic. Now, if someone, say, made a major invention that advanced the technology, that person would and should be discussed in an appropriate history section. If someone was famous in the modern age, it's an open question if they revolutionized the profession enough to mention in the article itself. Here, you added two people who are (presumably) still alive, presumably notable for their artistry with metal, and three more people from history. But just to take the tower of London example, would not ALL blacksmiths who serve the Tower be notable? Why one and not another? You added a cannon maker from the Philippines, why not the first blacksmith to forge a cannon in another country? You added the maker of the Bowie knife; why was he more notable than another knifemaker, or someone who forged other weaponry? Do you see how It's not appropriate for this article? A list could be very interesting (compare to, say List of 4-H alumni as an example of a long, extensive list of people who already have wikipedia articles AND are associated with the topic). If a previous list was AfD'd, it was, most likely, because it was either unsourced or very poorly done. One thing you can do is ask an admin to restore it to your user sandbox and look at it. Then expand and improve per WP:LIST. Montanabw^(talk) 02:00, 30 May 2017 (UTC)

• I've restored and started expanding the list of notable smiths. With the exception of Greefkes, these are all names that are fairly familiar to smiths. (And Greefkes is in Dona Z. Meilach's books, which is where notable smiths ought to be listed). A couple more contemporary smiths from the UK would be Dick Quinnell MBE and Peter Parkinson, mostly here because of their involvement in the early '80s with the setting up of BABA and the revival of art smithing in the UK. James Horrobin would be another important UK smith. Again, Meilach is a good source here.

The farriery competitions I've removed because this sort of "performance" show is little about the real art of smithing. Also (and this is unappreciated in a modern horse town) there is rather more to smithing than fitting shoes. Andy Dingley (talk) 10:14, 30 May 2017 (UTC)

Thanks Montanabw. Yes I can see it could get unwieldy if it was a free for all. But until it does, a small list is better in the article, and when it gets bigger it could be split off, and {{main}}ed from the article to the list, with a small list of only the top highlights remaining in the article.

Thanks Andy Dingley. A better job than my first attempt.

WP:EVENTUAL I suppose. Eno Lirpa (talk) 11:25, 30 May 2017 (UTC)

What would be useful would be to clarify some criteria for what puts a smith onto this list. "WP:N" doesn't do it - it's mostly too broad, also too narrow as it's excludes the notable in favour of those who simply have articles extant (which isn't the same thing).

For historical smiths, there are a few who ought to be here because they have changed the development of smithing. Medieval armourers and the first to forge cannon barrels ought to be mentioned. Lest it fill with Victorians though, this should probably stay close to blacksmithing (hand striking of ferrous metals) and avoid ironmaking, foundrywork or steam hammer forging. For a similar reason I left Neil Burridge off the list - he's an important contemporary swordsmith, but he's working with bronze by casting, rather than smithing. Also swordsmiths probably belong elsewhere. Andy Dingley (talk) 11:38, 30 May 2017 (UTC)

In short, I really think a stand-alone list is better than a random collection of names with no real criteria for why they are there... Andy is also right about distinguishing blacksmithing from ironworking and foundrywork in general. Montanabw^(talk) 20:29, 30 May 2017 (UTC)

External links modified

Hello fellow Wikipedians,

I have just modified one external link on Blacksmith. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added archive https://web.archive.org/web/20140306053833/http://www.baba.org.uk/About_Baba to http://www.baba.org.uk/About_Baba

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 15:26, 21 July 2017 (UTC)

Semi-protected edit request on 15 November 2017

Under Mythological Notable blacksmiths, Hephaestus(https://en.wikipedia.org/wiki/Hephaestus) the Greek God is forgotten. Costa bo (talk) 09:13, 15 November 2017 (UTC)

Reluctantly Not done: Although it would likely be appropriate to include him in that list, Hephaestus is already mentioned and discussed in detail in the level 2 section "Mythology". If another autoconfirmed editor in good standing sees fit to make this change I would not object. —KuyaBriBri^Talk 15:44, 15 November 2017 (UTC)

Semi-protected edit request on 17 January 2018

Picture of modern blacksmiths in xinjiang should read "in western china" not "eastern" Teeris (talk) 16:52, 17 January 2018 (UTC)

Done Eggishorn (talk) (contrib) 19:37, 17 January 2018 (UTC)

Semi-protected edit request on 1 July 2018

On the 8th line of the "20th and 21st centuries" section, there appears to be a grammatical error. I believe that instead of saying "with 30 charter members and had 2013 about 600 members", it should be chanced to "with 30 charter members and had about 600 members in 2013" for more clarity on behalf of the reader. ZachT1234 (talk) 04:43, 1 July 2018 (UTC)

 Done Thank you for pointing out the error. — LeoFrank  ^Talk 05:24, 1 July 2018 (UTC)

Proposed merge with Whitesmith

If whitesmith is a type of blacksmith and the article has only one line, Merging might be better Daiyusha (talk) 06:17, 27 December 2018 (UTC)

A whitesmith is not the same as a blacksmith. However, the latest one-liner at whitesmith is somewhat inaccurate. Older versions of the article, before its content was copied to tinsmith, were more accurate. The one-line article should not stand as-is and I would have redirected it immediately (ie. undone the latest edit) if there wasn't a move discussion. Tinsmith would currently be a better redirect than blacksmith, it does at least mention the term whitesmith, or at least until the author of the latest one-liner tried to remove it. Lithopsian (talk) 16:40, 27 December 2018 (UTC)

Oppose I'd revert to this version and add sources such as 1 and 2 to demonstrate the term refers to both tin work, and iron finishing work.--Pontificalibus 13:38, 28 December 2018 (UTC)

• Agree with reversion idea. SITH (talk) 20:02, 29 December 2018 (UTC)
• Oppose In what way are they related? "They hit metal"? A blacksmith works steel, hot, primarily to stretch it to shape. A whitesmith works pre-made tinned sheet cold, with mallets, to bend it to shape and solder it.

Ignorance of a subject is not reason to merge. Andy Dingley (talk) 22:27, 29 December 2018 (UTC)

• Redirect Whitesmith to Tinsmith. Whitesmith is a synonym of Tinsmith. Repeated restoration of this content fork is disruptive.Polyamorph (talk) 09:55, 4 January 2019 (UTC)

As I have indicated above the sources show the word has a dual meaning. It refers to someone who produces refined products of iron and steel and evolved from a speciality of blacksmithing. It is also a synonym for tinsmith. A redirect to either blacksmith or tinsmith would not therefore be appropriate so the only workable solution is to have a seperate article, and the sources support this.--Pontificalibus 10:04, 4 January 2019 (UTC)

Better etymology for 'black' in blacksmith

I can't find any evidence to support the article's claim that 'black' refers to firescale. However, I did find this: "Some early civilisations do not appear to have recognised iron as being distinct from copper and refer to it as black copper..." -- Madeleine Durand-Charre, Microstructures of Steels and Cast Irons, p. 3 --Cowlinator (talk) 19:47, 13 February 2019 (UTC)

It's pretty clear that black refers to the colour of the metal. I'm not sure that the various conditions under which the metal appears black are really relevant.--Pontificalibus 08:11, 14 February 2019 (UTC)

Firescale may actually mean Mill scale, given the ferrous materials - open to debate on this.203.10.91.89 (talk) 23:28, 13 July 2020 (UTC)

Semi-protected edit request on 6 September 2019

In section 6.2 "Before the Iron Age", "crystal" is misspelled as "cristal". The specific paragraph I'm referring to is this one:

Copper and bronze cannot be hardened by heat-treatment, they can only be hardened by cold working. To accomplish this, a piece of bronze is lightly hammered for a long period of time. The localized stress-cycling causes work hardening by changing the size and shape of the metal's cristals. The hardened bronze can then be ground to sharpen it to make edged tools. 140.90.86.99 (talk) 15:12, 6 September 2019 (UTC)

Done. Thanks. --Pontificalibus 15:17, 6 September 2019 (UTC)

blacksmith in music

Suggestion for an addition to "see also"

In the smithy sparks sometimes fly from the anvil, composer Handel (18th C) wrote a delightful piece for the harpsichord that has earned the title The Harmonious Blacksmith in which musical sparks fly, there is a wikipedia page dedicated to it, and I suggest the inclusion in "see also" of a link to that page. — Preceding unsigned comment added by 216.6.185.102 (talk) 20:34, 9 November 2019 (UTC)

tiny edit request

Under Smithing Process..."hammer, an anvil, and a chisel" (comma after anvil). Sorry. OCD Viapersona (talk) 22:23, 28 February 2021 (UTC)

Semi-protected edit request on 16 March 2022

{{subst:trim|1=

Hi, I'd like to make changes to the "Medieval" section; I'd like to add a lot in terms of content, would that be alright?

 Not done: it's not clear what changes you want to be made. Please mention the specific changes in a "change X to Y" format and provide a reliable source if appropriate. ScottishFinnishRadish (talk) 23:24, 16 March 2022 (UTC)

==Wiki Education assignment: The Middle Ages== This article was the subject of a Wiki Education Foundation-supported course assignment, between 12 January 2022 and 13 May 2022. Further details are available on the course page. Student editor(s): Ahanson11020 (article contribs). Peer reviewers: Pjmuril, Totallynottai.

History

origin of blacksmith 118.103.138.116 (talk) 09:46, 17 July 2023 (UTC)

I'm not sure if you're asking a question, but the origin of the word "blacksmith" is detailed in the Etymology section: Blacksmith#Etymology. Polyamorph (talk) 14:26, 17 July 2023 (UTC)

Semi-protected edit request on 25 November 2023

Was just wondering if adding John Deere as a notable blacksmith would be appropriate. His shop produced his self polishing plow and I just figured that it was an important piece of history. Thanks 12.74.222.46 (talk) 22:47, 25 November 2023 (UTC)

 Not done: it's not clear what changes you want to be made. Please mention the specific changes in a "change X to Y" format and provide a reliable source if appropriate. —TechnoSquirrel69 (sigh) 05:13, 26 November 2023 (UTC)